Let's talk hardware

Status
Not open for further replies.

Bronze

ECF Guru
ECF Veteran
Verified Member
Aug 19, 2012
40,240
188,011
This one could wind up worse than Black Friday at WalMartm but-
REOSMods will post REOMizer 2.0 RBA's 7:00 EST tonight. It will be a remanufacture of existing RBA's specifically for Bottom-Feed mods, with ceramic base and Phillips-head screws. I think targeted price is around $40

我不知道你剛才說什麼在地獄。
 

bivie

Resting In Peace
ECF Veteran
Jul 17, 2012
2,046
4,197
Damon, TX near Houston
BobbyIvie.com
Nice find X. I'll have to pick up some of that. I have many uses for it. I'll reiterate here...the best thread protection is a 7mm x 0.5mm thread die to touch up all these 510 threads that come with the devices we screw on our mods.

So, I just mine and sat down with it. I could not for the life of me get that 510 connection
to fit in a hole. I tried and tried, and finally got frustrated and put it down. I came back to
it later and tried again - nothing.

Wait - what about right in the middle? Shazaam.

Sheez. Box of rocks when it comes to some things. Duh.
 

Bronze

ECF Guru
ECF Veteran
Verified Member
Aug 19, 2012
40,240
188,011
So, I just mine and sat down with it. I could not for the life of me get that 510 connection
to fit in a hole. I tried and tried, and finally got frustrated and put it down. I came back to
it later and tried again - nothing.

Wait - what about right in the middle? Shazaam.

Sheez. Box of rocks when it comes to some things. Duh.

I'll say to you what I just said to Pop Pop...我不知道你剛才說什麼在地獄
 

XfooYen

Vaping Master
ECF Veteran
Verified Member
Oct 11, 2012
3,035
5,032
SoCal
Nice find X. I'll have to pick up some of that. I have many uses for it. I'll reiterate here...the best thread protection is a 7mm x 0.5mm thread die to touch up all these 510 threads that come with the devices we screw on our mods.

I gotta remember to pick up one of those as well as a 7mm flat bottom tap to clean up crunchy mod connectors.
 

PapawBrett

Retired
ECF Veteran
Verified Member
Jul 16, 2012
8,761
66,518
Monroe NC
This one could wind up worse than Black Friday at WalMartm but-
REOSMods will post REOMizer 2.0 RBA's 7:00 EST tonight. It will be a remanufacture of existing RBA's specifically for Bottom-Feed mods, with ceramic base and Phillips-head screws. I think targeted price is around $40

我不知道你剛才說什麼在地獄。

? ? ? Is that because you suspect Chinese craftsmanship (actually Maine) or is that because the post makes no sense?
I know I probably lean towards REOS more than a few around here (Think it's more a ProVari crowd on this thread) but I also remember hearing about VMods here. Anyways, they're avaiable on website now (and yes, I got two)
 

Bronze

ECF Guru
ECF Veteran
Verified Member
Aug 19, 2012
40,240
188,011
? ? ? Is that because you suspect Chinese craftsmanship (actually Maine) or is that because the post makes no sense?
I know I probably lean towards REOS more than a few around here (Think it's more a ProVari crowd on this thread) but I also remember hearing about VMods here. Anyways, they're avaiable on website now (and yes, I got two)

Made no sense. :)
 

PapawBrett

Retired
ECF Veteran
Verified Member
Jul 16, 2012
8,761
66,518
Monroe NC
Oh. Rob O'Neill, Founder and Owner of REOSMods tried to put together an inexpensive ReBuildable Atomizer for those who enjoy using his Mods, however he was not pleased with his first RBA (ReBuilable Atomizer), the REOMizer. So Rob O'Neill, of REOSMods, has been working on a second RBA (ReBuilable Atomizer) called the REOMizer 2.0. These RBA (ReBuildable Atomizer) are from the Phillipines (?) and are remanufactured by Rob O'Neill, of REOSMods, specifically for REOS bottom-feed Mods. These are mods that contain a small e-liquid bottle inside, that contains a feed tube up to the cupwell, and the user can feed e-liquid up from the onboard bottle to the cupwell by giving the onboad bottle a gentle sqweeze, commonly called 'sqwonking'. The new REOMizer 2.0, remanufactured by Rob O'Neill of REOSMods, also will have a ceramic (non-conductive) inner base and small phillips-head screw in lieu of the standard small hexhead screws. These RBA's (ReBuildable Atomizer) went on sale at 7:00pm EST at the REOSMods website.

And... Bronze, that's for Billiherst from the NT thread. Don't act like you don't know......
 

Bronze

ECF Guru
ECF Veteran
Verified Member
Aug 19, 2012
40,240
188,011
Ah..now I get it. I know next to nothing about the REO's...other than they exist. I don't read every post on the NT thread. Someday I would like to try a bottom feeder. Not in any hurry. Seems my only choices are REO and VMOD. Or at least those are the two most popular ones. So what is the general consensus of the 2.0?
 

MrPicC

Vaping Master
ECF Veteran
Verified Member
Jan 19, 2012
5,573
13,663
Lone Star State
They just went on sale tonight. Ask me in a week or so....

Tempting for sure but might sell my reo. That's up in air right now as it's getting tremendous usage this week. It's been hard to train myself away from tanks.

Sent from my SAMSUNG-SGH-I747 using Tapatalk 2
 

Schnarph

Vaping Master
ECF Veteran
Verified Member
Feb 21, 2013
4,618
9,558
Dripping Springs, TX
Currently I have an Ego-T 2 upgrade passthrough with Kanger T2s or boge carts in a F17. I am definitely going to make a mod or two myself, I like building/fixing stuff. I was going to have something much better by now, but purchased 2 years worth of DIY PG based nic solution and flavors, and about 200ml of various vendor liquids (also with PG) a few weeks before discovering a nasty PG allergy. Also had to spend thousands fixing the car and getting a new fridge and dryer this month. Now I'm aiming my sights lower, looking at starting with a box mod like an Ovale V8 or maybe a Tmax when they finally come out, a DiD clone, octopus, and/or drunker tank type rebuildables. Cheap stuff for now, the Provari will have to wait a few more months.
Some of this thread makes me envious, most of it reminds me how broke I am. I took technology for granted before it all started breaking on me! Don't forget how lucky you guys are, it's an easy thing to lose sight of. Being off cigarettes is the only really important thing for me at this point, and probably all of you guys, too.
 

Bronze

ECF Guru
ECF Veteran
Verified Member
Aug 19, 2012
40,240
188,011
Currently I have an Ego-T 2 upgrade passthrough with Kanger T2s or boge carts in a F17. I am definitely going to make a mod or two myself, I like building/fixing stuff. I was going to have something much better by now, but purchased 2 years worth of DIY PG based nic solution and flavors, and about 200ml of various vendor liquids (also with PG) a few weeks before discovering a nasty PG allergy. Also had to spend thousands fixing the car and getting a new fridge and dryer this month. Now I'm aiming my sights lower, looking at starting with a box mod like an Ovale V8 or maybe a Tmax when they finally come out, a DiD clone, octopus, and/or drunker tank type rebuildables. Cheap stuff for now, the Provari will have to wait a few more months.
Some of this thread makes me envious, most of it reminds me how broke I am. I took technology for granted before it all started breaking on me! Don't forget how lucky you guys are, it's an easy thing to lose sight of. Being off cigarettes is the only really important thing for me at this point, and probably all of you guys, too.

Yep, sometimes life gets in the way Schnarph. Sounds like your wallet got hit hard. The stuff you are using is just fine. Enjoy it. All the rest is just tweaking.
 

gthompson

Free at last
ECF Veteran
Verified Member
Jul 28, 2011
9,814
22,104
Tennessee, USA
Being off cigarettes is the only really important thing for me at this point, and probably all of you guys, too.

That is indeed the ONLY thing.

Hey, don't feel like you're missing out. In nearly 2 years of vaping I've spent probably not much more than $500 on hardware, and nearly half of that was a Provari. I'm a cheap date and not ashamed of it. The bulk of my vaping budget goes to juice.
 

Robino1

Resting in Peace
ECF Veteran
Sep 7, 2012
27,447
110,404
Treasure Coast, Florida
As everyone probably knows by now, I'm not an explorer into the hardware side. I'm content with what I have and it's a simple setup. It's all about just staying away from cigs in whatever way you need to do that. For me it's a decent battery that gives power to my clearo that holds enough juice that will last me hours. I don't wanna think any harder than that about vaping ;)

Too much other stuff going on that needs my attention. :)
 

Bronze

ECF Guru
ECF Veteran
Verified Member
Aug 19, 2012
40,240
188,011
Exactly Robin. There are some who really enjoy the equipment side of vaping like MP and X and others. It is a lot of fun. Others don't much care about that and just want to vape. I was big on the gear side when I first started. I enjoyed learning and trying new stuff. Then one day I realized I didn't have enough juices I enjoyed so I sorta gave up the gear side and went out to explore new juices. That's when I found HHV. Been getting into the gear a bit more of late but like everything else there is a price tag associated with it. Nice to have some sharp people in this forum who have explored all the latest and greatest gadgets...people we trust. That helps the wallet. I still find it neat that you started with the Novas and are still on the Novas. I've been on them a long time too (but I use other stuff) and they're fine. Right now, I have a bottom coil filled with SF/TC blend and it is rocking my world. Plenty of TH, plenty of vapor, and plenty of flavor. And it is only a $1.70 clearo.
 
Status
Not open for further replies.

Users who are viewing this thread