Dumb Question for the Day ; Is there a way to adjust the Voltage on a ProVari Mini ? Only one button, no instructions...
Let's Talk Hardware
- Thread starter Pappy
- Start date
- th_trl_thread_readers 0
- Status
I hate one button mods like that... read the manual to see how to make changes http://www.provape.com/v/images/ProVariManual.pdf
5 button presses will get you to "Pu" - Power Up mode. Wait a second or two and it will show you the current level of power. Power is adjustable from 2.9v to 6v
7 button presses will get you to "Pd" - Power Down mode.
Those are the ones you will use the most.
The other one you may end up using is the "Ao" - Atomizer Ohms. This will check your Atomizer to tell you what Ohms the Provari is reading on your Atty.
The Gus Estia is the one high end atty on my gotta have list , I'm jealous !
Since I well exceed 40 watts on some of my subohm builds , I've come to see the need for a device with more power than the DNA's are putting out , I was hoping Evolv was going to provide it with this last device but they kept it conservative , I'm a little disappointed since BK is sitting on some really nice wood for building mods with , and something in at least 75 watts as a minimum would really be sweet .
Yup , you got that right ! The Rose is a beast , but ya gotta push it . Bimini mentioned the Gus Estia , that would be the S in devices . I've got my sights set on the Gus , and Yup Qorax's pictorial is to blame .It was RBA's - not RDA's - Retic was talking about. I think he's referring to the Rose, since he's been pretty darn pleased with it overall.
No problem , I was just letting Papaw know there are other atty's that upset the apple cart but they're not appropriate for a Provari . I do think the DNA40 would make a good replacement chip for a VV Grand though since the VV's aren't being made anymore .
The Gus Estia is the one high end atty on my gotta have list , I'm jealous !
as soon as I get 4-5 days of down time and some decent chips......
I'm always wanting to fiddle with it... check volts/ohms... change the output etc. So a 3 button works quicker for me... A friend bought my Zmax from me because she liked a single button also... so I know it takes all types...
I always push the wrong button when I had my Vamo and Lavatube and it's even worse with this SVD. Then I can never figure out what combination of buttons to push for what function. One button operation is perfect for old, worn out, brain dead idiots like me. The day I can't find the one button is when I'll have the white coats haul me out and put me away.
The Gus Estia is the one high end atty on my gotta have list , I'm jealous !
Yea, as soon as I saw one of his Gus Lord pics, I thought I might want it. Then he started that whole thread and the Estia thread. Well, this pic should explain why I HAD to have it.
as soon as I get 4-5 days of down time and some decent chips......
Oh! What have I been missing?! One of these days, soon, but after the Destin Fishing Rodeo, but before Christmas, maybe over Thanksgiving, or before that, or after, Ms Bimini and I are going to NOLA - I promised her earlier this year. Would love to see what you're conjuring up if/when that happens.
Too bad we won't see Rivers vs. Brees during regular season this year.
Cool , we can knock back a few brews when you come , let us know when you're coming .
The SVD has the instructions laser etched on them but it doesn't stop me from pushing on the bottom of it after a vape session with my mechs .I always push the wrong button when I had my Vamo and Lavatube and it's even worse with this SVD. Then I can never figure out what combination of buttons to push for what function. One button operation is perfect for old, worn out, brain dead idiots like me. The day I can't find the one button is when I'll have the white coats haul me out and put me away.
I wanted to post this for people that are having trouble capturing the wire or use ribbon wire on a Kayfun . These are the correct size and the hex nut used as a washer along with the cheese head screw gives a lot more surface area to catch the wire . I've dealt with this company a few times and they've been fast and reliable .
M31628 - M1.6X3 Slotted Cheese Head Machine Screw Stainless Steel A2 DIN84A
M50599 - M1.6X.35 Hex Nut Stainless Steel A2 DIN934
M31628 - M1.6X3 Slotted Cheese Head Machine Screw Stainless Steel A2 DIN84A
M50599 - M1.6X.35 Hex Nut Stainless Steel A2 DIN934
I'm thinking the matte finish with the 510 adapter is my cup of tea , but I might pick up a mech with 20 x 1 threading just for it .Yea, as soon as I saw one of his Gus Lord pics, I thought I might want it. Then he started that whole thread and the Estia thread. Well, this pic should explain why I HAD to have it.
Yup , you got that right ! The Rose is a beast , but ya gotta push it . Bimini mentioned the Gus Estia , that would be the S in devices . I've got my sights set on the Gus , and Yup Qorax's pictorial is to blame .
The Rose is on my wish list. But I have to stay away from Qorax's threads. I spent too much time today on the Erlkonigan thread, and now I'm fighting wanting one.
What build did you settle on for your Rose? I just ordered another Veritas to go with all those new flavors, and some 26 ga Kanthal to experiment with.
- Status
Similar threads
- Locked
- Locked
