Let's Talk Hardware

Status
Not open for further replies.

Bronze

ECF Guru
ECF Veteran
Verified Member
Aug 19, 2012
40,240
188,009
Bought P3 this morning, in the process of trading for a P2/ Original SM kayfun. $670 of Equipment when new.
Two Woodvil (mini and 18490) sold and LP/SL Grand shipped. $650 of equipment when new.
Once I get confirmation of the second half of the Trade, I can start scanning for hcigar or Ehpro kayfun clone.



EDIT : And, Yes, I trust the other member of the Trade, he is a stand-up kind of guy.

Dang, Pop...you've been wheelin' and dealin' today!!
 

retic1959

Vaping Master
ECF Veteran
  • Jul 28, 2013
    6,735
    28,858
    New Orleans , Louisiana
    What the heck is a Congestus ? and Why is someone filling up my mailbox asking for TWO of my Reos for One Congeatus ? and that battery tube actually is about the size of a Sex Toy :p Two Detonators for One sex toy ? NOT !!!!!
    Papaw the congestus is a bigazz stainless steel mech that holds 26650's it telescopes out to hold two batteries stacked and it's got a side fire button . Unique Mech but there are clones available and you'd never know what you're getting . Wouldn't trade one REO much less two for it under those circumstances .
     

    Dusty_D

    Original Guru
    Senior Moderator
    Supporting Member
    ECF Veteran
    Verified Member
    Jul 22, 2010
    16,228
    47,678
    53
    Toronto, Canada
    dustysfoodieadventures.blogspot.ca
    EDIT : And, Yes, I trust the other member of the Trade, he is a stand-up kind of guy.



    Why, thank you!!

    LP/SL is headed my way. Papaw is getting the P2+Extender Ring+SM KFL+Sotong Ring+Couple coloured tanks in exchange.

    We're related by hardware now. :)
     

    PapawBrett

    Retired
    ECF Veteran
    Verified Member
    Jul 16, 2012
    8,761
    66,518
    Monroe NC
    Dang, Pop...you've been wheelin' and dealin' today!!

    I have stated that should my VV Grands go, I would turn to ProVape for VV Mods for Home use. My elder VV, about two years old, is fading. I've put up a thread in REOVille looking for advice, but since they've been out of production so long I doubt I could match the internals.
    Thus, it's ProVari time....
     

    rdsok

    ECF Guru
    ECF Veteran
    Verified Member
    Mar 17, 2012
    16,213
    72,567
    Norman, Ok
    Why, thank you!!

    LP/SL is headed my way. Papaw is getting the P2+Extender Ring+SM KFL+Sotong Ring+Couple coloured tanks in exchange.

    We're related by hardware now. :)

    Oh how funny... not that you two did a trade... that's cool...

    ... but I was just thinking about teasing with Papa about making certain it wasn't a certain Canadian because well.. he's Canadian .... just for the fun of it and now I see it actually was that guy... :lol: :D
     

    PapawBrett

    Retired
    ECF Veteran
    Verified Member
    Jul 16, 2012
    8,761
    66,518
    Monroe NC
    Oh how funny... not that you two did a trade... that's cool...

    ... but I was just thinking about teasing with Papa about making certain it wasn't a certain Canadian because well.. he's Canadian .... just for the fun of it and now I see it actually was that guy... :lol: :D

    Even Better; Dusty is always saying "I like a Regulated Mod", now he has a LP/SL Reos and RM5 dual coil on it's way (by the way, don't toss that Drip Tip ! It's a two piece Platinum / Gold plated beauty). And I'm getting a ProVari !
    But the Reos Dusty is getting has the new Contacts, and lowered juice well, so his tanks and such should work well.
    And the ProVari has an Extended End, so my 18650 batts for my Grands / Woodvil should slide right in there.
     

    Voltron

    Ultra Member
    ECF Veteran
    Verified Member
    Oct 25, 2011
    1,487
    2,569
    San Juan, PR
    Don't bother..

    If you like high VG, you gotta get into dripping, or the Reo (reverse dripping!). :D

    SInce 70vg has been working so well on my KFM with a rayon wick lately, I imagine the AVE juices will do as well. At least better than in cartos and clearos (silica wick), in which I tried them in a very ong time ago. Anyway, I took advantage of the 30% sale and ordered six flavors: BB and GJ, which I have tried before, and Havana Gold, Gryphon's Breath, Blend 4, and Flue cured (all new to me). Any opinions on these that are not as empty as Dusty's would be greatly appreciated. ;)

    I also went ahead and ordered another KFM clone from FT, like Chak and Retic suggested. This time I got the one Chak linked me to, which is diferent to the one Retic suggested before.They have both good reviews, so I'll report back if I notice any differences between models once I use them.

    BTW, now I'm kinda dead set on getting a resonably sized (and priced) VV battery that goes with my KFM (on Cyber Monday). My MVP2 is too large for it, while my iStick is a much better fit. I asked before about the Innokin VV3, and didn't get the green light from Retic. Are you sure it won't handle my KFM with a 1.5ohm coil? If it won't, I'll just get a Black iStick instead.

    What do you say, Obi-Wan? :)
     
    Last edited:

    retic1959

    Vaping Master
    ECF Veteran
  • Jul 28, 2013
    6,735
    28,858
    New Orleans , Louisiana
    SInce 70vg has been working so well on my KFM with a rayon wick lately, I imagine the AVE juices will do as well. At least better than in cartos and clearos (silica wick), in which I tried them in a very ong time ago. Anyway, I took advantage of the 30% sale and ordered six flavors: BB and GL, which I have tried before, and Havana Gold, Gryphon's Breath, Blend 4, and Flue cured (all new to me). Any opinions on these that are not as empty as Dusty's would be greatly appreciated. ;) I also went ahead and ordered another KFM clone from FT, like Chak and Retic suggested. This time I got the one Chak linked me to, which is diferent to the one Retic suggested before.They have both good reviews, so I'll report back if I notice any differences between models once I use them. BTW, now I'm kinda dead set on getting a resonably sized (and priced) VV battery that goes with my KFM (on Cyber Monday). My MVP2 is too lange for it, while my iStick is a much better fit. I asked before about the Innokin VV3, and didn't get the green light from Retic. Are you sure it won't handle my KFM with a 1.5ohm coil? If it won't, I'll just get a Black iStick instead. What do you say, Obi-Wan? :)
    I'd go with the iStick , there's no doubt that it will handle the KFM easily .
     

    PapawBrett

    Retired
    ECF Veteran
    Verified Member
    Jul 16, 2012
    8,761
    66,518
    Monroe NC
    Question ; what are the diameters on a ProVari P2, and a P3 ? and which KFL clone matches these dimensions ?

    I'm thinking a Black Kayfun Lite V2 with a metallic center section and beauty ring might look sharp on a black P2, and a SM Kayfun should match up on a P3.... (Bronze should know about the latter....)
     
    Last edited:

    Dusty_D

    Original Guru
    Senior Moderator
    Supporting Member
    ECF Veteran
    Verified Member
    Jul 22, 2010
    16,228
    47,678
    53
    Toronto, Canada
    dustysfoodieadventures.blogspot.ca
    Question ; what are the diameters on a ProVari P2, and a P3 ? and which KFL clone matches these dimensions ?

    I'm thinking a Black Kayfun Lite V2 with a metallic center section and beauty ring might look sharp on a black P2, and a SM Kayfun should match up on a P3.... (Bronze should know about the latter....)


    Provari's are around 22.7mm wide and the KFL's are 22 mm from what I remember.
     

    Voltron

    Ultra Member
    ECF Veteran
    Verified Member
    Oct 25, 2011
    1,487
    2,569
    San Juan, PR
    I'd go with the iStick , there's no doubt that it will handle the KFM easily .

    Thanks a lot, man. Made the decision very easy for me, just how I like it. :) Now I gotta hunt for the best deal on the iStick on Cyber Monday.

    BTW, I notice that the KFM, which you legendarily made be buy, doesn't get a lot of respect on the forum. It even got discontinued for Christ's sake! :confused: I personally like it better than the Magma and KFL+. Less gurgling, smoother draw, virtually no leaking if you fill it up the right way.

    PS- Scarfy strongly suggested a Youde AGA-T5. Anyone here familiar with it?
     
    Status
    Not open for further replies.

    Users who are viewing this thread