He's talking about Genesis style atty's , the RSST is a Genesis style atty or Genny for short , originally designed for stainless steel mesh wicks . BK has a special way of wicking his with rayon and silica so it doesn't leak when it's layed down .
Let's Talk Hardware
- Thread starter Pappy
- Start date
- th_trl_thread_readers 0
- Status
2.2 ohm single coil. NET.com Black Cherry. VVGRAND.Just getting started. First observation - tighter than it looks. Will have to go smaller than 3/32 with mandrel. Screws are Phillips, not Allen. Everything fits tight. Vapor decent, good flavor. Still playing with air flow....
Wrapped a second coil, 5/64th dill bit, nine wraps 30g, testing 1.9 ohms. Noticeable difference. Good Vapor, Very Good Flavor. Seems like a little more breathing room inside the chamber using smaller mandrel. Since this is a Bottom Feed rba, I should add juice feed and drain are excellent. Using one third of one air slot and vaping smooth and easy. I get the impression a 1.6 ohm micro coil on a Woodvil or Grand would do very nicely.
I got my Kanger Subtank Mini and Nano's in today... they both work as well as the original Subtank...
If you like one, you'll like all of them... so pick the size of one that fits your needs best. I put my original on the 100w wooden box mod, the Mini on the ZNA clone and the Nano on my Vaporshark DNA 30w.... loving the size of the VS/Nano combo but I'm a bit worried that I'll blow through the 1300mah battery or the 3ml of juice
If you like one, you'll like all of them... so pick the size of one that fits your needs best. I put my original on the 100w wooden box mod, the Mini on the ZNA clone and the Nano on my Vaporshark DNA 30w.... loving the size of the VS/Nano combo but I'm a bit worried that I'll blow through the 1300mah battery or the 3ml of juice
Hey papaw! I'm so glad you got your cyclone AFC. The flavor off this guy is amazing, and it can have a hell of a vapor production if you want it to 
I build mine with 28ga and a 2mm bit
Burping out loud using Tapatalk
I build mine with 28ga and a 2mm bit
Burping out loud using Tapatalk
Single coil Cyclone, provides just what I am looking for. This is a versatile, quality device for sure.
Last edited:
Cautiously optimistic about the flavor removal process... So far... It seems that the mustiness is absent
Do let me know how much you like the RM4 Papaw..If I were you..I'd go ahead and put a coil in there. Have fun bud.
Will they pre drill to 2mm hole? That is why I don't have one. Too pretty to scratch up. Unless it's a brass chamber. I can do by hand then.
Finally got my dripper just right for me. Woohoo I can see why people sub ohm now! Just at 1.2 ohm dual and 18 watts this thing hits hard! Had to adjust the air flow and my inhale technique but the 6mg was making me quite buzzed. Very yummy flavor. Thanks for all the help everyone!
Sirius, you can close one side off for the air on the Cyclone AFC. I watched a few videos on it.
If anyone wants to try a split wick method on the Aqua 2, I just came across this. This method seems best to me so far, with a single coil.
Micro Single Coil Build Aqua Atomizer (Part 2) - YouTube
He is doing an Aqua 1 build here, but the wicking is the same.
If anyone wants to try a split wick method on the Aqua 2, I just came across this. This method seems best to me so far, with a single coil.
Micro Single Coil Build Aqua Atomizer (Part 2) - YouTube
He is doing an Aqua 1 build here, but the wicking is the same.
Cyclops AC? Can one be closed off for single coil?
Yes, and Yes. If you look closely at the Cyclops, the slots on the inside a 180* apart, but the exterior slot are about 120* apart. This way, it is possible to close off one side. Also, in between the two inner (180* apart) slots is a single air hole, I'm guessing 1mm in diameter. Too tight for me, I've turned to the one slot setting and am playing between 1/3 and 1/4 open. Easily 2mm of draw there.
I purchased a rebuild kit from Reos Mods. Decided even for my style of vaping the newer gold contacts fire a lot faster than the old aluminum ones. And, they are nearly maintenance free. There is even a video on his website where Rob shows and explains, step by step, how to remove the old contacts and install the new ones. What took him about 5 minutes took me 50 minutes, but I got it done and she's firing just fine. It's still a 'Classic' Juice well, so most of the newer RBA's won't fit, but that's OK because I just want better contacts.
^add a dab of Deoxit gold and the new sub ohm kit is sweeeeet
Burping out loud using Tapatalk
Burping out loud using Tapatalk
Set up a 7 wrap 3/32 28g for a 1.3 ohm coil in the rebuilt Grand. Vapor nearly instantaneous, and firing like a new mod.
That kit included the center firing pin, 510 gaskets, gold plated + contact, high temp fire button, gold plated - spring, bottle and tube.
The old 510 gasket was the PIA. I don't know if it was from use, juice or maybe overheating or over tightening, but it came out in pieces. slowly. I took over half an hour just getting the old one out, cleaning the inside of the 510 connector, and trying to get the new one seated properly. But it really is am upgrade for my old Classic Grand (Dusty ?) and well worth it.
That kit included the center firing pin, 510 gaskets, gold plated + contact, high temp fire button, gold plated - spring, bottle and tube.
The old 510 gasket was the PIA. I don't know if it was from use, juice or maybe overheating or over tightening, but it came out in pieces. slowly. I took over half an hour just getting the old one out, cleaning the inside of the 510 connector, and trying to get the new one seated properly. But it really is am upgrade for my old Classic Grand (Dusty ?) and well worth it.
Who said Phil Busardo can't do a short review...
Hahahaha hahaha awesome, I am behind on pbusardo videos by around 4 or 5 of them. To busy playing games on the computer and ps4 lol
Sent from my Samsung Galaxy Note 3 using Tapatalk!
- Status
Similar threads
- Locked
- Locked
