I know. I just need one too. I thought Amazon would have them, but what’s all listed is new looking spacers.
Little itty bitty mods under $100.
- Thread starter Katdarling
- Start date
- th_trl_thread_readers 0
- Status
perhaps a quick email to madvapes
I'm not terribly familiar with the spacers y'all are talking about, but Kidney Puncher has mod savers... Might take a couple stacked to do what you want, but...
Sent from my LG-H931 using Tapatalk
What we are talking about fits inside and sits on the post. Some were able to get an oring under the post also. This was mostly when the MPV got popular. Innokin never addressed the issue.
What I saw at KP is a Mod Guard? That might be a good solution actually. Probably make some at home, right?
Tx for looking.
Oh... That... I cut down an insulator off an old Kanger coil, stretched it over the points of a set of tweezers and slid it in and around the post.
Sent from my LG-H931 using Tapatalk
In the Itty Bitty department, a couple of krazy & generous friends sent me something that's surprisingly become a heavy-use-purpose option for me. I knew the pods wouldn't work for me (at least none so far) because I absolutely NEED to control the output.
THIS however, is basically akin to someone having washed one of my mods in hot water (shrinkage!
), and has really become a staple for dog-walks and such. The SWAG was great for me in those areas, but THIS is something I can't even tell is there.
Mind you, it'd NEVER be my main-vape, but the vape I get from it is surprising similar to my favorites, when set at my preferred 11w (RAW power, baybee!).
The Innokin GOBY (or as @Katdarling kawls it, "Go Bitty") has been a $20 home run. 1.6 ohms, 11 watts, 2ml of juice, 1000mAh, and smaller and lighter than my old & beloved Go-Go's. Wattage can be set and fixed at 10.5, 11, 12, 13, & 13.5.
Covers my needs, and I am pleased. THANK YOU, KD & JUMA.
I think with MFS' 15% sale this weekend, it's about $19 smackers for the kit (mod, tank, two coils, one spare glass, extra o-rings, and a screwy driver).
As I said, it's almost like someone washed one of my Jackies in hot water. Vapes VERY similar to the JAC & Eggroll (to my taste buds at least).
THIS however, is basically akin to someone having washed one of my mods in hot water (shrinkage!
), and has really become a staple for dog-walks and such. The SWAG was great for me in those areas, but THIS is something I can't even tell is there.Mind you, it'd NEVER be my main-vape, but the vape I get from it is surprising similar to my favorites, when set at my preferred 11w (RAW power, baybee!).
The Innokin GOBY (or as @Katdarling kawls it, "Go Bitty") has been a $20 home run. 1.6 ohms, 11 watts, 2ml of juice, 1000mAh, and smaller and lighter than my old & beloved Go-Go's. Wattage can be set and fixed at 10.5, 11, 12, 13, & 13.5.
Covers my needs, and I am pleased. THANK YOU, KD & JUMA.
I think with MFS' 15% sale this weekend, it's about $19 smackers for the kit (mod, tank, two coils, one spare glass, extra o-rings, and a screwy driver).
As I said, it's almost like someone washed one of my Jackies in hot water. Vapes VERY similar to the JAC & Eggroll (to my taste buds at least).
Nice to see your Ola Hero still in rotation! 
Nice to see your Ola Hero still in rotation!
That thing is awesome! Freaking adjustable 510 pin is invaluable. If they had more, I'd order a few. They're gone forever now. Too bad.
Thank YOU, David, for the rec. Another HOME RUN!
If I had recognized the adjustable pin earlier than just a few months ago, I might have a bunch of them now. The only other regulated mods I have that with are the very expensive EPMs. I MUCH prefer it to spring loaded.
I also prefer 5 speed (stick) cars. I like having total control...
I also prefer 5 speed (stick) cars. I like having total control...
Yeah, after my first I snapped up a few more, have three in rotation. While on the heavy end, they gain from that tank like construction a high degree of survivability Yeah, the move to mega-watt mods resulted in a lot of the "low" power ones going the way of the dodo... so when they went on sale, I stocked up
Yeah, the move to mega-watt mods resulted in a lot of the "low" power ones going the way of the dodo... so when they went on sale, I stocked up Yeah, after my first I snapped up a few more, have three in rotation. While on the heavy end, they gain from that tank like construction a high degree of survivability
So YOU'RE the reason I couldn't get any more!!!
In the Itty Bitty department, a couple of krazy & generous friends sent me something that's surprisingly become a heavy-use-purpose option for me. I knew the pods wouldn't work for me (at least none so far) because I absolutely NEED to control the output.
THIS however, is basically akin to someone having washed one of my mods in hot water (shrinkage!
Mind you, it'd NEVER be my main-vape, but the vape I get from it is surprising similar to my favorites, when set at my preferred 11w (RAW power, baybee!).
The Innokin GOBY (or as @Katdarling kawls it, "Go Bitty") has been a $20 home run. 1.6 ohms, 11 watts, 2ml of juice, 1000mAh, and smaller and lighter than my old & beloved Go-Go's. Wattage can be set and fixed at 10.5, 11, 12, 13, & 13.5.
Covers my needs, and I am pleased. THANK YOU, KD & JUMA.
I think with MFS' 15% sale this weekend, it's about $19 smackers for the kit (mod, tank, two coils, one spare glass, extra o-rings, and a screwy driver).
As I said, it's almost like someone washed one of my Jackies in hot water. Vapes VERY similar to the JAC & Eggroll (to my taste buds at least).
View attachment 736005
Just watched Todd's review on this - what a cute little PV !!!
I neeeeeed that purple one !
If they were around when I started vaping, I might never have moved up.
Mmm, yeah-no. Nevermind. Sure I would have.
But it wouldn't have been for necessity!
Settings-wise, it reminds me of the original Kanger K-Box 40W... Or the CoolFire II...If they were around when I started vaping, I might never have moved up.
Mmm, yeah-no. Nevermind. Sure I would have.
But it wouldn't have been for necessity! [emoji38]
Sent from my LG-H931 using Tapatalk
Yeah - nothing tremendously new there (settings wise). For me it's the package of tiny + control, and my vape just happens to fit into its (somewhat narrow) range.
Most of the coils I build or use are still in the 1.5-2.0 area, and I'm always set between 9 and 11 watts. I never learned how to vape "better", I guess.
Once again, I feel fortunate that I still prefer my vape the same way that I did when I began. If I could play that as lottery numbers, I'd be all set.
Yeah ya do.
The Go Bitty IS adorbs. I can say that with absto assurance and personal me'xperience.
1
My comment wasn't a complaint. I think there need to be more simple kits out there. Mode than once, I've seen people absolutely overwhelmed with settings and/or operating their devices on the wrong setting and not knowing how to get it back... I think of this as eGo mark II... A step up from an eGo twist...Yeah - nothing tremendously new there (settings wise). For me it's the package of tiny + control, and my vape just happens to fit into its (somewhat narrow) range.
Most of the coils I build or use are still in the 1.5-2.0 area, and I'm always set between 9 and 11 watts. I never learned how to vape "better", I guess.
Once again, I feel fortunate that I still prefer my vape the same way that I did when I began. If I could play that as lottery numbers, I'd be all set.
Sent from my LG-H931 using Tapatalk
- Status
