Also consider that it says it takes tanks that are 18.5mm or Less.
That is gunna Limit your Choices somewhat.
Little itty bitty mods under $100.
- Thread starter Katdarling
- Start date
- th_trl_thread_readers 0
- Status
Also consider that it says it takes tanks that are 18.5mm or Less.
That is gunna Limit your Choices somewhat.
You're right. I have a MicroStick also and don't usually use it. But, I might later if I start rebuilding more. So far, all I've used with it is a Spheroid. But, I've got a few more RBAs since then that should fit.Yep. I like the side by side design but my requirements are VV/VW, replaceable batt, at least 19mm opening for tank as well as size and weight stuff :- ) I have a microstick mech mod (sbs) - nice size but never use it. Got it just before the isticks came out
Maybe I should get a 15mm carto-tank.
I just LOVE the side-by-side configuration! And, I hate the look of tanks on top of box mods! I'ld rather just use a Provari with any larger tank. It matches better.
The only mod that I know of that matches your requirements is the XvoStick. I would love one but don't happen to have $225 laying around.
Maybe later.
I've seen the Xvo... I should have mentioned price in my 'requirements' :- ) I'll have to check out the Spheroid - I've used Kanger T3S but they need an ego-510 adapter - not always the best connection.
The Spheriod is the most common RBA to be seen with a MicroStick. It's also a little expensive if you buy it new. But, you can find them in the Classies pretty often.
Then I bought the Euforia, which is a Penelope clone by EHPro. It's 17 mm. I got mine from Vapor Leaf.
The RBA that came with my MicroStick when I bought it in the Classies is the Kayfun Mini clone.
The Spheroid is the only one I've tried so far. But, I'm a bit slow at trying new things, especially building coils. I do like the Spheroid. I just don't get around to rebuilding it very often.
And, of course, you could also use the Mini versions of the PT2 or the Vivi Nova, if you get really desperate. I don't really like them. But, I do have a small Vapocalypse stash of them just the same.
But, since I'm not really into rebuilding yet (just been dipping my toe in now and then), I may just buy a 15 mm carto-tank instead. After all, carto-tanks are what I use 75-90% of the time.
Idunno, DH. Fifty bucks is still fifty bucks. And for something that might last a year, if I'm lucky (at least based on my experiences)?
I've always felt that it was better to save up and get the one that might last, than to jump in for something that there's a good chance will not. We waited months and months before ordering our Xvo's, then another 9 1/2 weeks from order to delivery! Additionally, I waited almost a full year before ordering my first Billet Box (finally done in November, 2013).
And those two devices, in particular, both have so many things that can potentially go wrong, that I'd probably have opted for something else (cheaper) than to attempt replication via a rush-job imitation. And I'd feel a whole lot better if those rushed-jobs weren't so blatantly ripping off the originals. I mean, at least change the logos and stuff. Make it LOOK like it's not being ripped off (even if it is..).
Again, fifty bucks isn't chopped liver.
But that's just MY opinion, of course.
I just love the statement on the 3fvape product page there:
" If you find a product to be authentic, then it is not a clone. "
From your link...
"Atty hole: diameter-23.5mm, depth-maximum 35mm"
Now that make More Sense.
Last edited:
Don't forget the Luxury Box.
Replaceable 18650, opening up to 23mm and $27.99 (w FREE ship)...
Original Kangside KSD Luxury Box 35W VW Box Mod-27.99 and Free Shipping| GearBest.com
A prime candidate for a skin, to cover up that name...
The Luxury Box description says: 'Electrode: No spring'
Does that mean it has another type of protection in case of short instead a collapsible spring?
Does that mean it has another type of protection in case of short instead a collapsible spring?
Being as it's a regulated mod, I suspect the electronics do the protection and shut off the output if it sees a short.
Ranked by volume (mm³)...(with Depth x Width x Height in mm)...[Revised]
iStick-30W 21 x 32.5 x 77... 52,553
iStick-TC40W 22.3 x 36.2 x 77.3... 62,401
Cloupor Mini Plus 22 x 37 x 78.5...63,899
eVic VTC Mini 22.2 x 38.2 x 82...69,539
Wismec Presa 24.4 x 34.9 x 81.9... 69,743
KBOX Mini 22 x 39 x 82... 70,356
iPV D2 23 x 40 x 78... 71,760
HV Defender-50W 23 x 38 x 85... 74,290
HV Defender-36W 25 x 35 x 85... 74,375
Kamry 30W V2 21 x 44 x 81...74,844
OLA X Hero 30W 25 x 35.5 x 90...79,875
Coolfire IV 24 x 42 x 85... 85,680
KOOPER Mini 25 x 41 x 84... 86,100
iPV Mini 23 x 40 x 94... 86,480
FreakShow Tiny 23 x 46 x 84...88,872
iStick-30W 21 x 32.5 x 77... 52,553
iStick-TC40W 22.3 x 36.2 x 77.3... 62,401
Cloupor Mini Plus 22 x 37 x 78.5...63,899
eVic VTC Mini 22.2 x 38.2 x 82...69,539
Wismec Presa 24.4 x 34.9 x 81.9... 69,743
KBOX Mini 22 x 39 x 82... 70,356
iPV D2 23 x 40 x 78... 71,760
HV Defender-50W 23 x 38 x 85... 74,290
HV Defender-36W 25 x 35 x 85... 74,375
Kamry 30W V2 21 x 44 x 81...74,844
OLA X Hero 30W 25 x 35.5 x 90...79,875
Coolfire IV 24 x 42 x 85... 85,680
KOOPER Mini 25 x 41 x 84... 86,100
iPV Mini 23 x 40 x 94... 86,480
FreakShow Tiny 23 x 46 x 84...88,872
Me as well, 'DriaD.
- Status
