Little itty bitty mods under $100.

[VapingTurtle]

The screws that hold the bottom plate on backed themselves out.

Auto-screwing screws are a feature, not a bug.
Super-Gluing them may void your Auto-screwing screws' warranty.

 

[gerrymi]

"Mini mods" mentioned in this thread...

Mini istick-20W...1050mAh, ?-20W, NO S-L 510, $23

21 x 23.5 x 52 = 25,662 mm³

COV Mini Volt...1300mAh, 5-40W, ? S-L 510, $36

22 x 35 x 56 = 43,120 mm³

Kangside KSD Mini...1600mAh, 7-25W, +S-L 510, $21

22 x 40 x 59.5 = 52,360 mm³

Kangside KSD Vamo Box...18350 replace. batt., 7-25W, +S-L 510, $20

23.8 x 41.5 x 56 = 55,311 mm³

iSmoka Eleaf Mini iStick 20 Watts Ultra Mini Mod

Council Of Vapor Mini Volt 40W

$21.03 Authentic Kangside KSD Mini 25W 1600mAh VV/VW APV Mod - 2-8.5V / 7-25W / aluminum at FastTech - Worldwide Free Shipping

Original Kangside Kingside KSD Vamo Box 25W VW Mod

After posting this "Mini Mod" list...it occurred to me that I probably should have included the only other itty-bitty Mod that falls within this range of volumes (even if only for comparison).

The iStick-30W is thinner and less wide...but taller...than most of these 4 Mods.

21 x 32.5 x 77... 52,553 mm³

 

[WickedWicks]

"Mini Mods" mentioned in this thread...

Mini iStick-20W...1050mAh, ?-20W, NO S-L 510, $23

21 x 23.5 x 52 = 25,662 mm³

COV Mini Volt...1300mAh, 5-40W, ? S-L 510, $36

22 x 35 x 56 = 43,120 mm³

Kangside KSD Mini...1600mAh, 7-25W, +S-L 510, $21

22 x 40 x 59.5 = 52,360 mm³

Kangside KSD Vamo Box...18350 replace. batt., 7-25W, +S-L 510, $20

23.8 x 41.5 x 56 = 55,311 mm³

iSmoka Eleaf Mini iStick 20 Watts Ultra Mini Mod

Council Of Vapor Mini Volt 40W

$21.03 Authentic Kangside KSD Mini 25W 1600mAh VV/VW APV Mod - 2-8.5V / 7-25W / aluminum at FastTech - Worldwide Free Shipping

Original Kangside Kingside KSD Vamo Box 25W VW Mod

You might wanna add Athena 20T

77.3 x 29.5 x 17.1 mm = 38.993 mm³ - 1300mAh / 2-20W / $26

 

[WickedWicks]

Do we have any Kangside Sea Wasp Mini 40 owners meanwhile?

 

[DavidOck]

I've got some superglue, liquid and gel. If it happens again, I might try that.

Might want to use something else, so you can take it apart if you want. Rubber cement?

 

[gandymarsh]

Might want to use something else, so you can take it apart if you want. Rubber cement?

I'd probably just put a tiny drop in the channels. They are Allen screws so I think they would break free with a little force.

 

[DavidOck]

Maybe...

But yeah, in my experience too, super glues don't have a lot of shear strength. (Unless you don't want them to, then.... )

 

[Katdarling]

You, sir, are a true tootle-dripper. The HH 357s are magnificent for tootling with great flavor!

Another 357 fangoi here. Agreed, alden!

 

[clnire]

I have used David's rubber cement tip several times and works great on so many things.

 

[gerrymi]

Sigelei 50 watt V2 Box Mod

$19.99

Sigelei 50 watt V2 Box Mod

 

[Nanny22]

Sigelei 50 watt V2 Box Mod

$19.99

Sigelei 50 watt V2 Box Mod

I came here to ask about this mod @gerrymi posted above. Anyone hear any negatives? It's so cheap, the vapacalypse box is calling for it! I'm not looking for TC. Opinions?

 

[aldenf]

I came here to ask about this mod @gerrymi posted above. Anyone hear any negatives? It's so cheap, the vapacalypse box is calling for it! I'm not looking for TC. Opinions?

Sigelei's mods over the past year or so have been hit or miss. Some have been superb; others were sub-par. You may want to check the Sigelei 50W v2 ECF thread out and see what they have to say... Remember, this is a VW mod only. It uses the YiHi SX330 chipset and is speced from 7-50W.

Sigelei 50 watt V2 thread

 

[Nanny22]

Sigelei's mods over the past year or so have been hit or miss. Some have been superb; others were sub-par. You may want to check the Sigelei 50W v2 ECF thread out and see what they have to say...

Sigelei 50 watt V2 thread

THANK YOU, buddy!!! I used the search feature and was bogged down in all the hits I got.

 

[whodat2112]

I came here to ask about this mod @gerrymi posted above. Anyone hear any negatives? It's so cheap, the vapacalypse box is calling for it! I'm not looking for TC. Opinions?

I ordered one, so I'll let you know in a week or so.

 

[whodat2112]

It will be my first Sigelei. I have a couple of IPV's, an Innokin Disruptor, and a Koopor mini.

 

[pokemom]

I know we are moving towards replaceable batteries, but I have to say that this itty bitty is LITTLE! 40 watt, 1300 mah, cute as a button, and works great. Probably not an all day mod (but it does work as a pass-thru). I'm liking it!! Under $30 bucks.

Sent from my iPhone using Tapatalk

 

[gerrymi]

You may want to check the Sigelei 50W v2 ECF thread out and see what they have to say...

Size comparison:

 

[gerrymi]

I know we are moving towards replaceable batteries, but I have to say that this itty bitty is LITTLE! 40 watt, 1300 mah, cute as a button, and works great. Probably not an all day mod (but it does work as a pass-thru). I'm liking it!! Under $30 bucks.

Hey poke...Is the Mini Volt's 510 connection spring-loaded???

 

[pokemom]

Hey poke...Is the Mini Volt's 510 connection spring-loaded???

Just checked and yes it is!


Sent from my iPhone using Tapatalk

 

[Woofer]

Do we have any Kangside Sea Wasp Mini 40 owners meanwhile?

I received a Kangside Vamo 25w (18350) today, absolute lovin it.