Look what I got...
- Thread starter MisterMike
- Start date
- th_trl_thread_readers 0
- Status
WOOHOOOO way to go!!!!! i am guessing you already know, but it is something to try if you don't 
for the stardust i have my saber set to 4.7V and it is pretty nice
yes this has been more 0.02 cents for from back wood boy from the peanut gallery
for the stardust i have my saber set to 4.7V and it is pretty nice yes this has been more 0.02 cents for from back wood boy from the peanut gallery
Just going to put my pennies in here.. I couldn't get above 4.2 on my SS LT and 2 different Stardusts, without it getting that slight burnt taste. I would go slowly up the voltage just to be safe
and gratz! woo! SHINY!
and gratz! woo! SHINY!
Just going to put my pennies in here.. I couldn't get above 4.2 on my SS LT and 2 different Stardusts, without it getting that slight burnt taste. I would go slowly up the voltage just to be safe
do you have SR or LR? and i feel sheepish to ask this....is there something to say that? seeing as i have 2 SR's and 3 LR's + the new version 3 stardust....so far i am using a dot system to tell the difference lol
Slowly going up in voltage is the best idea anyways I couldn't take the Stardust (SR) past 4.5 without burning taste personally.
I couldn't take the Stardust (SR) past 4.5 without burning taste personally.
Dot system seems like a good idea, other than that measuring them is all I know .
Unless I remember correctly and can measure when I get home they were SR ones.
Unless I remember correctly and can measure when I get home they were SR ones.
First thing I thought of:
Thanks, one and all. I look forward to learning how to get the most out it.
I'm fiddling around with my Boge LRs right now trying to find that sweet spot. 4.0-4.2 seems to be the best so far. Gonna have a go at dripping later.
BTW - can you rinse out atomizers?
This is my methods, and may not be the best to cleaning the stardust and Vision Extreme (which reminds me, i need to look to get more of those) please be advised this is my method, and my not work for you. Sadly i have to add this warning tag and say that i assume no liablity for damaged/broken equipment this may cause on you.
Stardust: put about 0.8ml of water in there, then with the cap off put your finger over the top and shake the
out of it, then gently tap it upside down in the sink. Do this a second time. If you have a darker color juice you will see the wicks turn white
then put it on a ego battery (if you have one), with a towel on your knee, gently tap the top metal ring on your leg, this loosens and removes water left behind in the stardust.
Now, with the cap still off blow into the star dust, then press the fire button on the ego, if your ego has a 5 second cut off great! If no cut off then count to 10 and release the button. Blow into the stardust and repeat this process until you see the wicks are dry OR you are getting a hint of smoke from the top needle. At this point put in the new juice. yes it will take a few pulls to re-prime the star dust
WARNING: by blowing into the stardust, water and residual juice will blow into your face, make sure to wear glasses that sit close to your face, like sunglasses
The Vision extreme: I have a glass i have deadicated to cleaning the extreme, clear smoke tech dual coils, my drip atty, ego-t etc. What you do is drop the extreme into the glass of water....i let mine site in the water for 24hrs, then take it out via strainer and sink, blow into the battery connection end to remove water, put in a open window and let it dry 24~48 hours
Again this is my methods, which again may not be the best and there could/would be better ways, hope this helps
Stardust: put about 0.8ml of water in there, then with the cap off put your finger over the top and shake the
out of it, then gently tap it upside down in the sink. Do this a second time. If you have a darker color juice you will see the wicks turn white then put it on a ego battery (if you have one), with a towel on your knee, gently tap the top metal ring on your leg, this loosens and removes water left behind in the stardust.
Now, with the cap still off blow into the star dust, then press the fire button on the ego, if your ego has a 5 second cut off great! If no cut off then count to 10 and release the button. Blow into the stardust and repeat this process until you see the wicks are dry OR you are getting a hint of smoke from the top needle. At this point put in the new juice. yes it will take a few pulls to re-prime the star dust
WARNING: by blowing into the stardust, water and residual juice will blow into your face, make sure to wear glasses that sit close to your face, like sunglasses
The Vision extreme: I have a glass i have deadicated to cleaning the extreme, clear smoke tech dual coils, my drip atty, ego-t etc. What you do is drop the extreme into the glass of water....i let mine site in the water for 24hrs, then take it out via strainer and sink, blow into the battery connection end to remove water, put in a open window and let it dry 24~48 hours
Again this is my methods, which again may not be the best and there could/would be better ways, hope this helps
I can tell you a 510 to ego would be plenty long enough with a little gap for improved air flow, as that is what i got for my saber
says he with 6 stardust's and planning on getting another 4
You will just want to blow them out, maybe put some pure PG in there and blow that through or just vape it out (if you have any) then I always put a couple drops of whatever I am dripping in and blow that through as well....that is my method anyways, I wouldn't drip any cinnamon unless you want to make it a dedicated cinnamon atty. if you don't want to go through the whole routine a simple blow out will often be fine if the previous flavor wasn't too strong.
Good to know. So much learning to do, so little time.
Is a cinnamon vape anything like the cinnamon gum/hearts? If so, I think I'll pass. Never particuarly enjoyed either of those things.
The 510-eGo connector works perfect. Unless you like "stacking" 510-510 connectors
The 510-eGo connector works perfect. Unless you like "stacking" 510-510 connectors
It is Chelly you are talking about
she always has interesting idea's now excue me as i go hide behind my JC bottle of watermelon
- Status
Similar threads
- Locked
