Looking for a Mod with No Cutoff Time

[Monkey Arms]

Can anyone suggest VV Mods with NO Cutoff Time? If you're like me and have been vaping for 5 years, I've weened down to Very low MG juice and it takes quite a while to get a good warm throat hit, sometimes 20 seconds on rough days. The cutoff times out on most of the Lava, Pro Vari type devices. I want to control my own cutoff...

Thanks

 

[sawlight]

My Provari does go to 20 seconds, I just timed it, just for you in fact! I don't think you will find anything longer than that! It's a built in safety factor that VV/VW devices have to keep them from constantly going off in a pocket/purse and catching things on fire.
Anything longer than that, I think you will have to go with a mechanical of some sort.

 

[pufZeppelin]

I believe the purpose of the "Limited Power On Time" is to save the 'coil' from burning out

and over loading the battery...

so to accomplish more would require some HEAVY DUTY equipment (more than our cheap little PV's can handle) IMO

just my thoughts

 

[Monkey Arms]

20 Seconds would probably work. I currently have an original Buzz which has No Cuttoff, but it just doesn't have all the Bells & Whistles. Looking for the next step...

 

[Magma]

AFAIK, the Tesla does not have a cut off. Mine is not with me at work or I would check for you.

 

[aznzing03]

I had that issue too. Wanted to take long pulls and just puff away on my carto's. Was using my iTaste and am now using mechanicals.
I got around it by just quickly releasing and pushing the button again before the cut off and I just kept vaping. Probably not the safest but I did it for a month or so and no damage that I've seen.

 

[Visus]

I think you would have to scratch build your mod yourself for a no timing cutoff variable device.

 

[Mitey F]

Do you use RBA's? It's quite easy to get a GOOD throat hit with an RBA, even with a very short pull.

 

[Waldo919]

AFAIK, the Tesla does not have a cut off. Mine is not with me at work or I would check for you.

Tesla is about 10-12 seconds..in my hand at the moment. ..maybe try a mechanical with a kick

 

[sawlight]

Tesla is about 10-12 seconds..in my hand at the moment. ..maybe try a mechanical with a kick

Thanks, I've read the user manual and searched for an answer, but couldn't find one on the internet!

 

[bilbobaggins30]

DNA20 has a high cutoff... I recently dry burned my dirty genny coils, and the cutoff time was at least 1 min. Don't quote me, but it is high... If it has one at all...

 

[DoogieTony]

Look into different juice delivery systems. If you get a decent RBA it'll give you a good TH and will be way cheaper than a new mod.

 

[Ryedan]

I learned to shut off and then on again quickly to get past the timer. That worked well for me. The timer is there only to avoid the PV staying on in your pocket or purse if the button gets activated. There is no other safety issue to worry about.

 

[Monkey Arms]

I tried the Rebuildables before, just a nasty burning taste. I guess I didn't have the right one. Where should I be looking?

 

[bilbobaggins30]

Rebuildables are only as good as you make them...

 

[WattWick]

I thought there was some trick to this? Some light going out before the actual cut-off or something? So that you could easily manually override it? Or the cut-off when you release the button being "soft" so you could quickly let go and press again with no loss of ... power?

I may be dreaming. Personally I prefer systems that give me what I want in just a couple of seconds.

 

[SissySpike]

Most of the box mods I have do not have a cut off limit. Shan B mods don't cut off if I remember right. The non DNA ones.

 

[tj99959]

I'm guessing that you're somewhat old school (like a lot of us)

So I'll suggest a Reo, and then shut up.

 

[Monkey Arms]

Thank You all for responding.