Low ohm tube mod

[Herb Garrison]

I'm looking for a lower ohm VV/VW tube mod to use. So many cut out at about 1.2ohm, I want to go to about 1ohm maybe just a touch lower. Any suggestions for me?

 

[Tangaroav]

I am subscribing to this thread, ( the only way I know to do it is to post on it, sorry).

 

[Robbahh]

The seven30 takes a 26650 battery, goes up to 30 watts and you can build down to .5 ohms. Eciggity.com has them for 89.99

 

[doots]

I'm looking for a lower ohm VV/VW tube mod to use. So many cut out at about 1.2ohm, I want to go to about 1ohm maybe just a touch lower. Any suggestions for me?

why not just use a mech at that low of ohms?

 

[Robbahh]

With a little ingenuity you can rig an 18650 to fit in it too

 

[supertrunker]

I am subscribing to this thread, ( the only way I know to do it is to post on it, sorry).

If you go to "thread tools" at the top of the page, mine is in a grey bar, then there is an option there to subscribe to a thread.

T

 

[Herb Garrison]

I'm looking for a lower ohm VV/VW tube mod to use. So many cut out at about 1.2ohm, I want to go to about 1ohm maybe just a touch lower. Any suggestions for me?

why not just use a mech at that low of ohms?

I have a few mechanical mods but I want one more vv/vw mod to use also. Sometimes I'm in the mood to adjust the power. It's kind of goofy but that's me - goofy.

 

[EuroChris]

You have the Sigelei 20/30w that can go down to around 0,65Ohms. The Innokin SVD goes down to about 0,8Ohms.

 

[asvaldr]

Try evic supreme it's tubular in shape and can go as low as .7 if I'm correct or the ZNA it's tube-ish in shape

 

[jaxgator]

Try evic supreme it's tubular in shape and can go as low as .7 if I'm correct

I own the eVic Supreme and it will fire down to a .5Ω coil. Here it is with a .78Ω coil (the eVic only has one decimal place so it rounds).

 

[asvaldr]

I own the eVic Supreme and it will fire down to a .5 coil. Here it is with a .78 coil (the eVic only has one decimal place so it rounds).

Oh yeah i remember now some guy at a local B&M told me his evic can even fire at .4 occasionally

 

[realsis]

If you go to the box, the cloupor dna30 goes down to .3. It's 69.dollars with charger from fluid vapes. Great device. It's not the tube but I'm sure it would not disappoint.

 

[Herb Garrison]

If you go to the box, the cloupor dna30 goes down to .3. It's 69.dollars with charger from fluid vapes. Great device. It's not the tube but I'm sure it would not disappoint.

I'm going to build a box mod out of the XS350 chip because it's upgradable and fires at 0.2ohm. I'm mainly looking for a semi low ohm (around .8) tube mod. My ProVari fires around .8. I think I might go with the SVD if it works around there.

 

[77cj5]

I'm going to build a box mod out of the XS350 chip because it's upgradable and fires at 0.2ohm. I'm mainly looking for a semi low ohm (around .8) tube mod. My ProVari fires around .8. I think I might go with the SVD if it works around there.

I'm going to have to check into that xs350 myself to. I'm wanting to do the same thing.

Sent from my SAMSUNG-SGH-I717 using Tapatalk

 

[Herb Garrison]

Now why didn't anyone recommend the Sigelei 20W? I'm trying it out right now and it's not to bad. Any known issues?