LR atties at 3.7v

[keon718nyc]

Cos,

yes, until you hit 7.4V with the I-7 you will be satisfied with 3.7V.
The 7 combo is Bliss my friend, no sucking on the attie, jsut a quick hit and you are in vape heaven!!!! The i-6 will be outstanding with the AFS, 100000% sure!!

I have to agree 100%, I will say only one thing.... 16430/CR123 7.2-7.4v + I7 = vaping BLISS all the way!!! The batteries can last me 2 days. Also i have been using the same 4 batteries rotating them daily since the GGTS was released with no issues at all or voltage drop. Its nearly impossible for me to even vape at 3.7v and enjoy it after being spoiled at 7.4... Trust me on this!

 

[kaji]

I have to agree 100%, I will say only one thing.... 16430/CR123 7.2-7.4v + I7 = VAPING BLISS all the way!!! The batteries can last me 2 days. Also i have been using the same 4 batteries rotating them daily since the GGTS was released with no issues at all or voltage drop. Its nearly impossible for me to even vape at 3.7v and enjoy it after being spoiled at 7.4... Trust me on this!

What is the resistance with the I7 HV attys?

 

[mwa102464]

Thats an Imeo trade secret that only a few know of course

 

[kaji]

Thats an Imeo trade secret that only a few know of course

A trade secret that people with a multimeter can figure out, thats is if they can get them of course.

 

[imeothanasis]

what about the batch you just shipped????

They dont have the improvements I asked Emonty. They still are the good iaties you knew but no improvements

 

[imeothanasis]

Why does a shorter battery life even matter? I can only use rcr123a batteries to get 8-10w (6v) with a HV atty, these only have 500-750 mah. But with a LR atty, I can use 18650 batteries that have upwards of 2200 mah, so even if its 50% less (which it isnt), it will still last much longer than a 6v setup.

The practical effect, is that while battery life is shorter, my time between battery swaps is still much longer since I can use higher capacity batteries and achieve the same wattage.

we talk about this in earlier posts Kaji. Battery life was a big problem those years we are here and we tried to improve it. The battery had a specific life with 3,7 volt and then we reduce it with 6 volt vaping by 30%. Then we brought the HV atties and we get it back to normal. Now we will reduce it more than 50% with LR?

You are right about 18650 battery but we have to test those LR atties, this is my problem. You see that companies like TW dont give a warranty for those. That is exactly what I had said about those atties that they will not last long. I see people here that say the opossite and opinions vary a lot so we have to let time pass to see what is really happens. Think how long 3,7 volt atties stay alive at 6 volts (1,7 ampere through the atty) and you will see why I dont think that those atties will stay in market (2,5 ampere though the atty)

 

[imeothanasis]

Imeo yeh you dont need China. from what others have said they really mess up a lot of orders by changing things all the time. sorry that others are watching your every move Imeo yeh some things have to be kept quiet. all i know is i cant wait to try one of your attys. besides the 901 are you making the 510 also or just making 901? thanks Imeo.

thanks my friend cos, and yes I made the first batch of 510. I send some of them to my sellers for a start

 

[imeothanasis]

people can easily find the resistance of an i7 kaji but no reason to push my lack by saying all the secrets at once. If someone is interested he can find out himself

 

[wood_510]

Well a little update on my LR atties from TW.... The were great for a little while but Imeo is right they just aren't lasting me any time and I'm not running them dry... Anyway it very well could be a problem with my vaping style but they are just blowing left and right. I'm on my 3rd one TODAY!!! Needless to say they just aren't for me.. I like the lowered resistance just not the durability... Happily back to my Iatties.

 

[boomboom]

EM will not have the delrin insulator. Di just posted in EM. They will have the same standard insulator as regular Joye510's.

 

[cos]

I have to agree 100%, I will say only one thing.... 16430/CR123 7.2-7.4v + I7 = VAPING BLISS all the way!!! The batteries can last me 2 days. Also i have been using the same 4 batteries rotating them daily since the GGTS was released with no issues at all or voltage drop. Its nearly impossible for me to even vape at 3.7v and enjoy it after being spoiled at 7.4... Trust me on this!

Hey NYC. thanks for the advice but i tried 7.4v while back. just not for me. actually not crazy about 6v either or 5v. but 3.7v yeh but thats with the LR atties and the new cartomizers that came out lately. not the old cartos. Now i have 3 mods. 1 is the GG Grant and i wont name the others out of respect for Imeo and his forum. But i will say on the GG Grant i do go to 6v and vape a regular 510 atty (not the Low res ones at 6v). on the grant 6 v is very smooth and doesnt burn at all. unless i keep my finger on the button.lol. the other mods at 5 v and 6 v it was very hot and i tasted the burn even with 3 second presses of the button. But like i said its not for me. But as i am typing this maybe 7.4v on the gg grant wont be that hot. But being you said it i will try it whenever i get some Imeo i attys.
Hey where in NYC you live. i live in Florida now but was raised in NY. lived in queens then moved to Long Island. worked downtown in Chelsea area. loved Chelsea man....good ole days.
happy Vaping

 

[blue9]

All this talk of Attys... LR HV Normal i7 i6 i3.... What is it all about.. Please can some one tell me the difference.... I have some 901's 510's and some HV's....

Would one of you experts make a video showing me how and what you are doing with these things !!

Are you all just dripping with all these different types... I'm lost but really want to know more as it sounds like I'm missing out on loads... Or has this somthing to do with the AFS?


By the way I'm using Cartomisers as they just screw in and vape away... Too easy for a Newbie on the block.....

Hang on is this all AFS talk ? Sorry if so

 

[Wafflestomper]

Im a little late to chime in, but Im gonna.

I love the LR atties. I'm currently vaping 3.7v on a LR 901 and it's a lot like vaping at 5v.

Lots of vapor and flavor, but it does lack a little of that HV "bite", and the vapor is warm, but not quite as much.

To be honest, I have had way better life with these atties than with my HV atties. Hoping with the new AFS I can go back to HV and keep an atty alive longer than a few days. So far the LR atties are lasting me 2-3 weeks of Wafflestomper abuse.

Would love to have the option of a LR Iatty. I'm thinking a super durable LR atty Imeo style would be a real treasure. Not to undermine the HV Iatties, but it's nice to be able to switch things up a bit....its a good way to rediscover your favorite juices in a new way.

 

[keon718nyc]

Hey NYC. thanks for the advice but i tried 7.4v while back. just not for me. actually not crazy about 6v either or 5v. but 3.7v yeh but thats with the LR atties and the new cartomizers that came out lately. not the old cartos. Now i have 3 mods. 1 is the GG Grant and i wont name the others out of respect for Imeo and his forum. But i will say on the GG Grant i do go to 6v and vape a regular 510 atty (not the Low res ones at 6v). on the grant 6 v is very smooth and doesnt burn at all. unless i keep my finger on the button.lol. the other mods at 5 v and 6 v it was very hot and i tasted the burn even with 3 second presses of the button. But like i said its not for me. But as i am typing this maybe 7.4v on the gg grant wont be that hot. But being you said it i will try it whenever i get some Imeo i attys.
Hey where in NYC you live. i live in Florida now but was raised in NY. lived in queens then moved to Long Island. worked downtown in Chelsea area. loved Chelsea man....good ole days.
happy Vaping

I live in Queens NY and was raised here as well, Nice to see a fellow NYer here!. The I7 atty at 7.2v doesnt get hot unless you use it nonstop vaping. I feel only having to hit the button for 2-3 sec gives me what im looking for. The I7 should be around in a few days from now im hoping. I love to have backups. I have a LV 3.7 atty and it does work great on the slim but i dont use it becouse im stuck on 7.2v hehehe.....