no need for this boom my friend. Its simple:
Battery with a regular atty gives 1,2 ampere and it gives 2,5 ampere with LR atties. So it will last -50%. Its simple maths and physics
LR atties at 3.7v
- Thread starter wood_510
- Start date
- th_trl_thread_readers 0
- Status
no need for this boom my friend. Its simple:
Battery with a regular atty gives 1,2 ampere and it gives 2,5 ampere with LR atties. So it will last -50%. Its simple maths and physics
So what did the resistance of you 510 turned out to be? I'm curious now
With the 0.5 ohm resistance internally, I will use the simple math Imeo has encouraged me to use, and it works out to 2.2-2.3 ohm's on a Joye510 and 2.5 ohm on an i3
If your smoking times are those you said mwa then with a regular atty those times would be doubled.
I dont disagree with those atties but they have the disadvandage of very low battery life and we also have to see its life. 2,5 ampere of current through the atty is a very big amount of current and I already shaw you the other day the link from TW that says that they dont waranty the LR atties because of their small life.
no need for this boom my friend. Its simple:
Battery with a regular atty gives 1,2 ampere and it gives 2,5 ampere with LR atties. So it will last -50%. Its simple maths and physics
Not such a big deal with an 18650 because those last a long time already, but on a 10440, that's not much vape time at all. I see the light now Imeo!!
With an 18650 and LR atty, I may as well use a HV atty with 6 volts to get the same watt power. But, we're kinda stuck with the Slim and the batteries it can take. The new Grant will solve all this though with a 14500 battery at 900mah, or I could just use the GGTS in it's smaller form with a 14500 and a LR atty. So many options with the GGTS. If a person uses a LR atty on the Slim, they need to be aware they will get more smoke, but at a sacrifice of battery life which will be incredibly short like a chinese e-cig with 180mah. New, yet undeveloped/unreleased battery technology holds the key to higher mah in small form factor.
I understand completely where you're coming from.
yes, exactly boom. LR atomizers require new battery technology that we dont have now. But I want to see the life of those atomizers and we speak again soon about this issue
If your smoking times are those you said mwa then with a regular atty those times would be doubled.
I dont disagree with those atties but they have the disadvandage of very low battery life and we also have to see its life. 2,5 ampere of current through the atty is a very big amount of current and I already shaw you the other day the link from TW that says that they dont waranty the LR atties because of their small life.
Imeo,
I kind of disagree and to me TW has some bad customer service and I dont use them but I cant blame them on their Atty and no Warranty because of the way some people and newbies use them, However at 2 Amp (if thats what they truly draw), I have had much luck and no problem with using the Ego Batt and it's only 650mAh and now they have a higher one about 900 mAh coming to market I believe very soon or already here now. Technology will even surpass where it is at the moment with Batts, that I am sure of, however my Batt stats are for real with the LR Attys and a 650 mAh Batt and thats a fact even using my GGTS with a big 18650 would prove to you what I am saying if you try this Imeo. I only am here to ask you for what I know is possible and truly on your side my friend and always will be, but you have to be a bit open minded and always think outside of the Box, as you do and do well the proof is in your mods, but my idea of the Mod I'm asking you to make in my other post would be a winner, will be a winner, especially if you make it Imeo.!!!
The technology is here now the LR is working fine especially on the AW 18650 High Drain Batt..!!!
Just so everyone knows what I'm using , it is an Ego Battery with an LR Atty.!!
Last edited by a moderator:
These LR Atty's also have a very small Derlin insulator on the Bottom of them and this makes the Bottom of the Atty better in my eyes than the one TW has out with the original Clear color big siicone insulator on them that end up getting messed up sometimes
Last edited by a moderator:
I use LR on 18650s and 14500 and they do fine.. great atty...
life might be a little short but they are sure good while they are working...
life might be a little short but they are sure good while they are working...
Wow i didnt know this. i bought 4 LR attys from them about 5 weeks ago and i only killed 1 so far. they are great but i cant wait for imeo's attys to try. its really nice to just use 3.7v.
Last edited by a moderator:
I think that I will not speak again for my new ideas because almost all people are here watching my next step mwa. They put a plastic insulator already exactly where I wanted to put it but China messed up with my order and the insulator is not there. I will soon make atomizers in Greece so I hope this China mess will stop and I will also be responsible for my atomizers. I want to make the stronger atomizers ever!!
MWA i forgot to add i totally agree with what you are sayingabout the LR attys. have to take care of the,m. i flood mine as well just like you and the taste is golden. keep it wet i dont care. it works very nice on my GG Grant as well as some of my other mods.
Cos,
yes, until you hit 7.4V with the I-7 you will be satisfied with 3.7V.
The 7 combo is Bliss my friend, no sucking on the attie, jsut a quick hit and you are in Vape heaven!!!! The i-6 will be outstanding with the AFS, 100000% sure!!
no need for this boom my friend. Its simple:
Battery with a regular atty gives 1,2 ampere and it gives 2,5 ampere with LR atties. So it will last -50%. Its simple maths and physics
Why does a shorter battery life even matter? I can only use rcr123a batteries to get 8-10w (6v) with a HV atty, these only have 500-750 mah. But with a LR atty, I can use 18650 batteries that have upwards of 2200 mah, so even if its 50% less (which it isnt), it will still last much longer than a 6v setup.
The practical effect, is that while battery life is shorter, my time between battery swaps is still much longer since I can use higher capacity batteries and achieve the same wattage.
You are correct, at 4.2v (freshly charged battery) with a 1.5Ω atomizer the amp draw is 2.8amp. There are many many batteries that support this, all of the AW Limns (including the tiny 16340) as well as most high capacity batteries (most all 18650s) can handle this amp draw without a problem.
Imeo yeh you dont need China. from what others have said they really mess up a lot of orders by changing things all the time. sorry that others are watching your every move Imeo yeh some things have to be kept quiet. all i know is i cant wait to try one of your attys. besides the 901 are you making the 510 also or just making 901? thanks Imeo.
- Status
Similar threads
