- Status
For real 5C?! Why didn't I know that...LOL! See? I still am learning and I've been vaping almost 2 years!
Oh wait, I think I misunderstood. You mean 2 seperate adapters, not using the same adapter and just turning it upside down. Brain fog may or may not lift today since I woke up with a cold this morning <sneeze>
Last edited:
How do you do your graphics 5cardstud Fusion-master
?
?Because sometimes when your testing things it's easier to just throw on another adapter than to start over. There is many thread patterns out there and I don't have every adapter so sometimes it's necessary. With 30 some adapters youl'd think I would have them all.
Done some changes to the Buzz Army Coat of Arms.
So.... like Bovina said, can I use the 510-801 on the Buzz for my Boges or do I need the801-510 also??How does that work???
J, I'm gonna hope that 5C will answer your question...my brain fog got denser as the day progressed into evening. I'm easily confuzzled right now lol
I think that if you ordered your Buzz with an 801 top cap, you will need an 801 to 510 adapter to use your boges on it. I don't think you can turn the adapter you have coming upside down.
I think that if you ordered your Buzz with an 801 top cap, you will need an 801 to 510 adapter to use your boges on it. I don't think you can turn the adapter you have coming upside down.
No, you would need a 510 to 801 adapter if you have a 510 cap. (IKV Fusions are 801)
OK, I got my Fusions and WOW... they vape great on my Riva with the adapter. One question.. I noticed immediately that I go through juice 3 times faster and have to top off very often before it starts to run dry. Is this due to me using the Fusions on the Riva? I'm condom filling to start with, so I know I'm getting my cartos totally full to start with. Any thoughts?
Consumption for a given eliquid directly relates to the power, how much the eliquid is being "cooked". Lower resistance = more eliquid consumed at a given voltage. By any chance are these LR fusions, while you're used to using SR cartos?
When I went to my Infinity, and then the Buzz Pro, I instantly went from 3 ml/day to 6ml/day consumption, after having used stock 808 and Riva 510 gear for my first 8 months of vaping. I went from vaping in the 5 - 6W area to vaping at 8 - 10W. Vaping was just plain more enjoyable, and when I added the M1A1 carto tank it became consistent, a big win (no more pesky carto refills, since I had a nice supply of eliquid -- every vape was good )
If you had been using a standard resistance 2.5 ohm carto, and are now using a 2 ohm LR fusion, you've instantly stepped up power by 25%, while a switch from 3 ohms to 2 is a jump of 50%. From sheer power you wouldn't be going through 3X the eliquid, but you may well be using more due to the simple extra pleasure of the vaping
When I went to my Infinity, and then the Buzz Pro, I instantly went from 3 ml/day to 6ml/day consumption, after having used stock 808 and Riva 510 gear for my first 8 months of vaping. I went from vaping in the 5 - 6W area to vaping at 8 - 10W. Vaping was just plain more enjoyable, and when I added the M1A1 carto tank it became consistent, a big win (no more pesky carto refills, since I had a nice supply of eliquid -- every vape was good
)If you had been using a standard resistance 2.5 ohm carto, and are now using a 2 ohm LR fusion, you've instantly stepped up power by 25%, while a switch from 3 ohms to 2 is a jump of 50%. From sheer power you wouldn't be going through 3X the eliquid, but you may well be using more due to the simple extra pleasure of the vaping
When they're available the 2.5 ohm consume less current (which means longer run time) for a given power. The 2 ohm, on the other hand, at max voltage will use a full 15W, if you need the most power.
Last edited:
I'm wanting to know this too; just ordered some Fusion LR, but now not sure should I have ordered SR (which are unavailable anyway).
1.0 for these
The 1.0 for fusions and the 1.5 for mega fusions that will be out soon. Here is what the 1.5 and mega fusions look like.
got the Buzz and I DO love it.. but it NEEDS that tank on ASAP. It goes through juice So much faster.. even set on low voltage with a 2.0 Fusion. I have to top off every couple of hits! It's been so annoying that it's ket me from using it much.. two hits, it goes dry, starts to burn and I have to re-fill again. It actually seems to give the best vapor on the lowest voltage setting with the LR 2.0 Fusions. Is this normal??
- Status
