Magnets falling out?

[sdotsd]

I'm sorry if this has been answered, search on tapatalk is awful. Anyways, one magnet on my door is gone, and the other pops out randomly. Can I super glue that bad boy back in there? The door seems to hold fine with just one. Thanks for any help!

Sent from my Galaxy Nexus using Tapatalk 2

 

[Emris]

Sure can, just make sure you get the polarity right on the magnets between the body and the door.

 

[boilednuts]

Yes, but don't get any on yer hands or put the magnet backwards.

 

[unsure]

I'm sorry if this has been answered, search on tapatalk is awful. Anyways, one magnet on my door is gone, and the other pops out randomly. Can I super glue that bad boy back in there? The door seems to hold fine with just one. Thanks for any help!

Sent from my Galaxy Nexus using Tapatalk 2

As said above by others.....no problem. I never had to with REOs but my Woodchucks I superglued several times.

 

[redeyedancer]

place the magnet on the body of your reo. Mark the top of the magnet with a marker. The marker side goes down on the door. Make sure there is no old dried up glue in the hole if there is try and remove it with a small regular screw driver . Put a small drop of glue in the hole .Put the magnet in the hole . You may need to use something to apply pressure on the magnet to push out any excess glue. I use the .... end of a screw driver or the flat end of a pair of tweezers . Keep a rag handy to wipe any excess glue .

 

[sdotsd]

Thanks for the responses, all! Rob, I can tell you've put a helluva lot of magnets in doors! Got it in there snug, even missing the other magnet its holding the door perfectly. Have a good night, and thanks again