" mAhmba " concept PV
- Thread starter tinear
- Start date
- th_trl_thread_readers 0
- Status
wow. just wow. if there are any plans to market these and you want a first group of pre orders. count me in.
This is just wonderful! The next major breakthough in PVs. Trog brought us to the Screwdriver/Prodigy/GG/SilverBullet/etc. level. This will bring us to the next.
Unless you are an entrepreneur yourself, sell the manufacturing rights to someone like Steve at Puresmoker and collect royalties. Then, while you're resting on your well-earned laurels, you could implement some of those tweaks that others here have suggested ... and/or reinvent the atomizer (making it more reliable and longer lasting).
Those of us who are more the intellectual type (aka all-thumbs) owe you (and all talented modders) a huge debt of gratitude. As previous posts have testified, we are prepared to put our money where our mouth is. Let us do so.
Well done! And thank you.
Unless you are an entrepreneur yourself, sell the manufacturing rights to someone like Steve at Puresmoker and collect royalties. Then, while you're resting on your well-earned laurels, you could implement some of those tweaks that others here have suggested ... and/or reinvent the atomizer (making it more reliable and longer lasting).
Those of us who are more the intellectual type (aka all-thumbs) owe you (and all talented modders) a huge debt of gratitude. As previous posts have testified, we are prepared to put our money where our mouth is. Let us do so.
Well done! And thank you.
I bet Pure Smoker is working on this along with their Protege' because I hear the Protege will be released along side another product. They won't tell us what it is yet. I HOPE THIS IS IT! Damn that thing is sweet! That battery will last forever too....
This is a massive step, and one of only two commercially viable direct drip mods I have seen (the other being the modular auto-feed system in the GG that will be released shortly). This looks like it is almost the perfect vaping device.
A few suggestions to make it absolutely perfect:
1) Integrated recharging circuit with cutoff for protected batteries. This was mentioned by a previous poster and would be extremely awesome, particularly if it used a mini-USB to USB cable interface rather than a custom job (ease of finding replacement cables). Even if the cable included the major charging hardware to keep electronic clutter to a minimum in the mod at the cost of needing a specific cable it would be effective.
2) Steel reinforcement bands inside to make it more rugged to shock and crushing. If the unit was fab molded in two halves (which could be done cheaply by a manufacturer, though would require a large upfront cost due to the large scale that such a request would require) it could be made to fit around the steel reinforcement structure. I suspect this would be a pricey mod: I wouldn't want to accidentally put something on it and watch it squish.
3) Along the same lines, a rubberized sleeve in the grip area. Again, would probably need to be fabbed, but if done right they could be done in various colors for user customization and would be a huge selling point. Think of those sleeves for ipods to get the idea. This would also add a great deal of shock protection to protect the buyer's investment.
4) Use of a standard bottle format. You probably are doing this already, but just sayin'.
Pie in the sky time:
5) Automatic juice feed. Imeo seems to be doing this by capillary feed direct onto the atomizer wick in his mod (requiring custom atomizers, but since his atomizers will be designed for higher voltage use this kind of is a wash). You're going the spray/drip route, so I'd suggest an electric micropump that is activated when the atomizer is on ... something like a Micro EO pump ( http://nft-eop.co.jp/en/pdf/download/poster/features_en.pdf ). If the pump is spec'd right and the delivery is correct, it could feed at the same rate the atomizer consumes fluid and would make everything automated. I don't see this type of application happening in the near future, making this pie in the sky. In the meantime, a manual dripper would work
A few suggestions to make it absolutely perfect:
1) Integrated recharging circuit with cutoff for protected batteries. This was mentioned by a previous poster and would be extremely awesome, particularly if it used a mini-USB to USB cable interface rather than a custom job (ease of finding replacement cables). Even if the cable included the major charging hardware to keep electronic clutter to a minimum in the mod at the cost of needing a specific cable it would be effective.
2) Steel reinforcement bands inside to make it more rugged to shock and crushing. If the unit was fab molded in two halves (which could be done cheaply by a manufacturer, though would require a large upfront cost due to the large scale that such a request would require) it could be made to fit around the steel reinforcement structure. I suspect this would be a pricey mod: I wouldn't want to accidentally put something on it and watch it squish.
3) Along the same lines, a rubberized sleeve in the grip area. Again, would probably need to be fabbed, but if done right they could be done in various colors for user customization and would be a huge selling point. Think of those sleeves for ipods to get the idea. This would also add a great deal of shock protection to protect the buyer's investment.
4) Use of a standard bottle format. You probably are doing this already, but just sayin'.
Pie in the sky time:
5) Automatic juice feed. Imeo seems to be doing this by capillary feed direct onto the atomizer wick in his mod (requiring custom atomizers, but since his atomizers will be designed for higher voltage use this kind of is a wash). You're going the spray/drip route, so I'd suggest an electric micropump that is activated when the atomizer is on ... something like a Micro EO pump ( http://nft-eop.co.jp/en/pdf/download/poster/features_en.pdf ). If the pump is spec'd right and the delivery is correct, it could feed at the same rate the atomizer consumes fluid and would make everything automated. I don't see this type of application happening in the near future, making this pie in the sky. In the meantime, a manual dripper would work
An autofeed pump runs into the problem of varying viscosity of juices - some sort of capillary feed is still probably the most feasible.
by far the best looking mod I have seen tinear ... mad props ... now start the mass production and help out your fellow vapers
I got to give credit where credit is due.
This is one of the best mods I've seen thus far.
I truly hope it will be available soon.
If RoboCop vaped I think he would use this Mod lol...
Great Work!!!
This is one of the best mods I've seen thus far.
I truly hope it will be available soon.
If RoboCop vaped I think he would use this Mod lol...
Great Work!!!
If that's true now you know where he's been.... More power to him and I wish him luck.
The Janty Cameo was in development way before this mod was created and doesn't have a juice feed system as far as I'm aware. The Cameo also has a hinged atomizer unit to fold it back against the body if I'm remembering correctly from googling up development pictures of it.
The silence here almost certainly means he's working with a manufacturer now ... it would be interesting to see which one is picking it up. I have a feeling it might be PureSmoker ....
The silence here almost certainly means he's working with a manufacturer now ... it would be interesting to see which one is picking it up. I have a feeling it might be PureSmoker ....
hey Cake you know mogur? ( read his posts, you`ll see) he used to post here and had some REALLY good info on the mechainics of the e-cig.
and i too watch this thread for whats happening with this really cool new e-cig.
and i too watch this thread for whats happening with this really cool new e-cig.
many speculated i was in cahoots with Janty on the Cameo after my SideWinder (see http://www.e-cigarette-forum.com/forum/modders-forum/10173-my-prototype.html )
they were wrong.
my silence is indicative of nothing except working 13 hour shifts, being exhausted, and having nothing new to note.
a few have speculated on a possible collaboration with PureSmoker.
at present, they are also wrong.
gotta love it!
Tinear:
Great to see you still alive and kicking...LOL Thanks for the "drop in"
Great to see you still alive and kicking...LOL Thanks for the "drop in"
JS!!! Not JantyStick...the other guy upstairs....
I AM an engineer and right AFTER I saw your detail pics, I had that 'duh' moment where you realize just how friggin' much sense simple makes - along with that why didn't I think of that feeling too.
Fantastic desgin and craftsmanship. What really floors me is that is newbie ready and probably simpler than the simplest first timer kit.
I'm simply amazed and humbled at the work of the master.
I AM an engineer and right AFTER I saw your detail pics, I had that 'duh' moment where you realize just how friggin' much sense simple makes - along with that why didn't I think of that feeling too.
Fantastic desgin and craftsmanship. What really floors me is that is newbie ready and probably simpler than the simplest first timer kit.
I'm simply amazed and humbled at the work of the master.
- Status
Similar threads
