Making a sx350 mod.

[alee132]

Thanks for the update on the FDV floating 510 connector. I ordered two of them today and they have already been shipped.

Nice. Yep I got everything for my mod now. Funny thing is I had ran into a hicup I thought would be the last thing I would worry about. lmao. I went to 6 or more different place is phoenix AZ looking for 20 AWG stranded wire. Home depot, hobby store, radio shack, auto zone, oriley's, and fry's electronics. So annoying. After a few day's of wasted time and energy thinking I could save time getting wire locally.Which btw places has 20 awg solid. They had every other gauge of wire stranded but 20AWG. I coulda gone with something bigger but I am not in such a rush to not do it right and everybody I talked to recommended 20 AWG stranded. Infact best recommended was the silicone type 20 AWG stranded that is used in RC car's because it is made to hold up to heat and vibration, etc. So I ended up finally getting it off of ebay earlier today. I should have just ordered it from online in the first place but I had no idea it would be a problem. I have spent more money then I would have thought because it's my first build and something I didn't have toolwise and material wise. But I already thinking about a second one after this lol. At least second one will be alot cheaper. Anyways. Once I get my wire, I will get it done hopefully that day. I will have everything but wiring done by time it get's here.

 

[hwwyang]

As far as 20 gauge wire is concern, from my experience with Audio Amplifier and speaker built, I found web site to be consistent and reliable:

http://www.partsconnexion.com/wire_hookup_dhlabs.html

From a colleague who used to sell custom made connection wires for high end audiophile systems, he strongly recommends DH labs. Parts Connexion is based out of canada (they also carry their own hookup wire in teflon insulated, silver plated, stranded 20 gauge wire per mil spec), shipping takes about 7 calendar days, if they have the items in stock.

 

[Steamer861]

My Sx350 came all ready wired up for the most part and there are 3 extra piece of wire included I think there is enough wire in the package I got to do the whole mod

Nice. Yep I got everything for my mod now. Funny thing is I had ran into a hicup I thought would be the last thing I would worry about. lmao. I went to 6 or more different place is phoenix AZ looking for 20 AWG stranded wire. Home depot, hobby store, radio shack, auto zone, oriley's, and fry's electronics. So annoying. After a few day's of wasted time and energy thinking I could save time getting wire locally.Which btw places has 20 awg solid. They had every other gauge of wire stranded but 20AWG. I coulda gone with something bigger but I am not in such a rush to not do it right and everybody I talked to recommended 20 AWG stranded. Infact best recommended was the silicone type 20 AWG stranded that is used in RC car's because it is made to hold up to heat and vibration, etc. So I ended up finally getting it off of ebay earlier today. I should have just ordered it from online in the first place but I had no idea it would be a problem. I have spent more money then I would have thought because it's my first build and something I didn't have toolwise and material wise. But I already thinking about a second one after this lol. At least second one will be alot cheaper. Anyways. Once I get my wire, I will get it done hopefully that day. I will have everything but wiring done by time it get's here.

 

[Cory Cooper]

My stuff should be here early next week I wish it was sooner so I could build this weekend reading these post has got me all excited for my build the only thing I don't have is a cradle of sort for the chip and screen think I might try the plexy and foam tape and see how that goes, please post picture of y'alls completed builds would really like to see how some of y'all put everything together

 

[Portertown]

My stuff should be here early next week I wish it was sooner so I could build this weekend reading these post has got me all excited for my build the only thing I don't have is a cradle of sort for the chip and screen think I might try the plexy and foam tape and see how that goes, please post picture of y'alls completed builds would really like to see how some of y'all put everything together

I am building the cradle for the SX350 out of Plexiglass I got from my local Lowes. I am using the .080 thick for the screen to lay against(will serve as a screen protector) and the .220 thick on top of that for the chip to set in. I am just going to cut a hole in this thicker piece the same size as the board of the SX350. This .220 is the exact thickness of the board and the screen, so the board will be fully supported on all four sides. On the end away from the screen I am going to cut two small pieces of the .080 to make supports to hold the board level. I will glue the two pieces of Plexiglass together with a few drops of superglue on the outer edges. I am placing the chip on the side of a Hammond 1590B box and with two 18650 battery holders in place, they will hold the chip/board in the cradle I am making. If I need to remove the chip/board I can just remove the battery holder that is next to it and holding it in the cradle.

 

[Cory Cooper]

Hey thanks that a great idea too so .22is the correct thickness for the board ill have to snag some up at lowes myself When I get to that part of my build

 

[lambjr88]

I actually just bought the new floating 510 from them earlier today. It's up on fdv site now. I opted for the 22mm washer with it for $1 more. That way my atty's with sit flush on it.

Where can I find the FDV floating 510 connector any links?

 

[Portertown]

Where can I find the FDV floating 510 connector any links?

SHOP - FatDaddyVapes.com - Home of the best vape tweaks and replacement hardware.

He has sold out his first shipment, but will have more on June 15th according to his website.

 

[USRN2016]

So, as far as a fire switch for the SX350, does it need to have any specific amp rating?

 

[Steamer861]

No You can use just about any thing

So, as far as a fire switch for the SX350, does it need to have any specific amp rating?

 

[sparkky1]

Is the hammond 1590b body your best option for dual batteries and 22m bezel ?, what is the story on this PROJECT ARIES body ?

 

[arkham]

hi guys, have you finished your mods? Would you care to post some pictures ?
The SX350 cradle thing is intriguing but I can't really figure out how you done it.
Thaks