- Status
hi everyone.. its really great that we have our own thread now.. Malaysia Boleh!
i wouldn't call myself a supplier but i do sell some PV for a few months now. Nothing fancy just 510's and eGo's i got from China. So if you guys looking for parts or e-juice just let me know.
BTW great work abechik with your mod, i've never met anybody from Malaysia that does that.
i wouldn't call myself a supplier but i do sell some PV for a few months now. Nothing fancy just 510's and eGo's i got from China. So if you guys looking for parts or e-juice just let me know.
BTW great work abechik with your mod, i've never met anybody from Malaysia that does that.
welcome choipadu, well abechik won't be alone for long...i'll be making some as well
nope..nada...only got 2AA and 4AA, i already mod 2AA for simple 3.7v boxmod (batteries on the way so rite now only used it as simple passthru mod wit output 5v,2A)
going big with the twin beasts ya abechik? me too me too, i'm still trying to figure out what's best to use as a casing...i'm thinking of going simple and use wood because I love woodworking...oh yeah abechik, that switching regulator we get from TI, it's better solder some resistor legs onto the pins without the resistor to avoid breaking the pins then only onto your pcb...once you think is ok then either put on a heat shrink or better yet just use the heat glue gun...bending the pins may and have been reported to break them as they are meant to be used on custom pcb...apa lagi? mari la melawat jalan pasar cari component lagi
aisehh mahfudz... ... so late informing me.... it never cross my mind to solder those extra leg first... already done on soldering part... manage to bend those PTR leg 45 degree only ... but already measured with the box... it seems can go in ... pretty tight fit though.....
I use the plastic project box... need to do cutting here and there for perfect fit with 18650 ... ... by weekend maybe can complete everything and have it working... i want to utilise leg 1... but finding small n/c switch is difficult...
I use the plastic project box... need to do cutting here and there for perfect fit with 18650 ... ... by weekend maybe can complete everything and have it working... i want to utilise leg 1... but finding small n/c switch is difficult...
waaa everyone wanna be mod already...gud gud hehe... vaping improvement maybe a little more hit than standard ego and riva 1100mah with trustfire 3.7v 900mah and AW 18650 3.7 2600mah...
abechick, ive got 3 unit of 3xAA batteries box....1 maybe i wanna moded it but 2 as spare...if u want it for ur evercool mod u can have it...
look like everyone wanna built a mod so i thought better share this info, re-post from another thread :- statement made by the genius Cisco bout battery:
It is true that a decent Li-ion (in the larger sizes) will output enough current to run any e-cig properly. IMR's will output more consistent current across the discharge cycle, Li-ion tend to drop off faster then IMR's, the reason the first 10-20% of the discharge cycle on a Li-ion is hotter then the remainder. If your boosting and or regulating you wont notice a drop off in output, so with an IMR you will sacrifice vape time over a Li-ion, for that configuration Li-ion will serve you best.
Personally I prefer IMR's because of the safety factor that Li-ion do not have, I am willing to sacrifice vape time for added safety and consistent unregulated current output. IMR's are a safer chemistry in the fact that if they vent, they only vent with gas not with gas/flames, IMR's do not require protection circuits and are designed to be the safer alternative in stacked battery configurations similar to LifePo4 ( true LifePo4 Chemistry is 3.2v nominal, LifePo4 do not come in 3.7v, it is a chemistry limitation. If you see a LifePo4 advertised as a 3.7v cell, its more then likely LiPo chemistry)
It is true that a decent Li-ion (in the larger sizes) will output enough current to run any e-cig properly. IMR's will output more consistent current across the discharge cycle, Li-ion tend to drop off faster then IMR's, the reason the first 10-20% of the discharge cycle on a Li-ion is hotter then the remainder. If your boosting and or regulating you wont notice a drop off in output, so with an IMR you will sacrifice vape time over a Li-ion, for that configuration Li-ion will serve you best.
Personally I prefer IMR's because of the safety factor that Li-ion do not have, I am willing to sacrifice vape time for added safety and consistent unregulated current output. IMR's are a safer chemistry in the fact that if they vent, they only vent with gas not with gas/flames, IMR's do not require protection circuits and are designed to be the safer alternative in stacked battery configurations similar to LifePo4 ( true LifePo4 Chemistry is 3.2v nominal, LifePo4 do not come in 3.7v, it is a chemistry limitation. If you see a LifePo4 advertised as a 3.7v cell, its more then likely LiPo chemistry)
finally ...my evercool mod work flawlessly (so far 
) ... this thing is awesome .... just finished making the 2nd one today... now i got 1 18650 and another with 14500 ...
added acrylic on top for extra working space inside the box, it also hold the battery connector better...
) ... this thing is awesome .... just finished making the 2nd one today... now i got 1 18650 and another with 14500 ...added acrylic on top for extra working space inside the box, it also hold the battery connector better...
Last edited:
tq.. but credit goes to contributors in the modders thread ... and TI of course for the awesome sample switching regulator... he he
Hi all...
I must be the earliest malaysian to join ECF but did not notice this forum since i was out of action for some time.
Its time to give my fave supplier some promotion. I buy from Electronic Cigarettes | M-Series Ecig manufacturer |Discount ecigs and bulk offers
Been doing so for many years. Even before anyone heard of e-cigs in M'sia. They have lowest fixed shipping among all chinese vendors and quality have been consistently good. Have never heard of a bad batch.
The Absolute MaxX is a good model. Its basically an EGO but i kinda like it better than the Joye ones. The atties seem to last longer at least imo.
Maybe we can organise a TT. If you guys come to JB, mamak session on me!
I must be the earliest malaysian to join ECF but did not notice this forum since i was out of action for some time.
Its time to give my fave supplier some promotion. I buy from Electronic Cigarettes | M-Series Ecig manufacturer |Discount ecigs and bulk offers
Been doing so for many years. Even before anyone heard of e-cigs in M'sia. They have lowest fixed shipping among all chinese vendors and quality have been consistently good. Have never heard of a bad batch.
The Absolute MaxX is a good model. Its basically an EGO but i kinda like it better than the Joye ones. The atties seem to last longer at least imo.
Maybe we can organise a TT. If you guys come to JB, mamak session on me!
Just registered and unexpectedly found a Malaysian sub-forum! It's nice to have a list of suppliers, maybe we can rate them?
i agree with most, Smoker Haven is a complete dupe. I haven't bought any spare part from any of the sites listed, I only buy e-liquid from a couple of Malaysian sellers at Lelong.com.my. You can find many sellers selling e-liquid, starter kits and even spare parts. I bought e-liquid from E-Rokok and http://www.ecigarettemalaysia.blog.com/, they offer great variety of choices, but I think the best site that you can purchase e-liquid from is E-Cig-Malaysia. I believe that the seller offer you the cheapest e-liquid at RM14 per bottle. And the more you buy the more you save. One part I like about the site is every order includes free pos laju. And one thing I like about the seller's e-liquid is he has the best & unbeatable strawberry flavor ever (because I like strawberry very much). I could even test all flavors when meeting up with the seller for the first time. The service is very customer oriented. And I buy from him ever since. So maybe Qayser90 can add the site I mentioned in your list.
Next, anyone knows the cheapest price for a set of eGo starter kit (comprised of two (2) 1100mAh & etc) and where to get it? I've done my research, mostly 650mAh are sold with a RM250 price tag.
- Status
Similar threads
- Locked
