I too found a MCM in my mailbox when I got home from work last night. Can't seem to put this thing down!
What is the overall size of these MCMs with the DNA20?
ManCaveMods - VW amd VV Wood Mods
- Thread starter matador
- Start date
- th_trl_thread_readers 0
-
- Tags
- evic madvapes myvapejuice provari
- Status
What is the overall size of these MCMs with the DNA20?
Roughly (using a tape measure): 3 3/8" tall x 2 1/14" wide x 1 1/4" deep. Give or take a 1/16" for the sloppy measurements on my part.
My measurements using a Digital Caliper are:
3.353" tall x 2.205" wide x 1.227" deep. So pretty accurate
Cool, thanks for the measurements, guys.
I read through your thread with the mod you are building. You have some great ideas. If your DNA20 didn't break you would have a nice 1st mod. I'll try to dig up some pictures of my first wood mod. It was an ugly beast, but it worked. Im glad to see more people build their own mods, its a lot of fun. Good luck!
Thanks, Matador. I've been an admirer of your mods for quite a while now. I'd love to see your first one! You're right that it's a lot of fun (once you remember it's supposed to be fun and get over the setbacks along the way).
Brandon offered to replace the DNA20D, so I'll be rolling again soon. Yippee!
Personally I wouldnt push any carto to 20w. You'll tast burning filler material more than your juice. If you really want to vape with that much power I would suggest a rebuildable atomizer. When I use cartos I only push about 9 watts through a 2ohm, thats plenty for me.
Matt - Just dropping you a note to say that after a week of using the MCM, it's definitely my favorite device! My poor ProVari, which was so well loved for a year, is getting rather jealous lately.
Here's hoping that you find time in the future to make more mods, because you absolutely have a genuine talent for it!
Here's hoping that you find time in the future to make more mods, because you absolutely have a genuine talent for it!
Hey just dropping a line to let you know a friend of mine who is a wood worker said that the mcm was put together extremely well. He was exceptionally impressed with how snug the door was and your use of polyester resin to make a clear window for the DNA. Just thought I would pass on the compliment.
So how is the move going? Hope everything is going as planned.
So how is the move going? Hope everything is going as planned.
The move is going slow... We moved in with my mother in law for the time being. Im pre-approved for a mortgage, so all thats left is finding a house. We've decided on moving to Denver because the houses are fairly cheap. Just have to find something that fits us and in a good neighborhood. Things are moving along for us, slowly but surely.
Well at least you have the mortgage. That must be a huge relief the way the economy is as of late. I am sure you will find a nice place. Spring is when a lot of people start moving so there should be a lot of choices available.
I was going through a box of wood and found a few unfinished mods. They dont need too much work to be completed so I am going to finish those up and post them. They are the Mini MCM's with DNA12. I'll get them up as soon as they are done.
That's great news for those that missed out; sometimes I think I enjoy my (your) Mini more than my (your) DNA20 mod.
Hope the house hunting is going well, and that you (and your family) is enjoying the change of climate.
Hope the house hunting is going well, and that you (and your family) is enjoying the change of climate.
That's great news for those that missed out; sometimes I think I enjoy my (your) Mini more than my (your) DNA20 mod.
Hope the house hunting is going well, and that you (and your family) is enjoying the change of climate.
Billy, im glad you enjoy the mini. These are a little different, im not using a tactile for the fire switch anymore. I found some real nice metal buttons with screw terminals, smaller buttons than the one used on the upgraded MCM20.
The house hunt is over, hopefully. I have to drive out to colorado friday to meet with the building inspector. And if everything goes well then I have a new house.
Also great news (the part about the house hunt hopefully being over).
Unlike your previous DNA20 sale, where I was honorable and allowed others to grab what might be the last you made, I think I'm gonna want to buy one of the upcoming Mini-with-a-new-button mods this time. The dual 18650 DNA20 is also still working great, and is a refined monster.
Want to reveal a little about what wood(s) are in this Mini batch?
Unlike your previous DNA20 sale, where I was honorable and allowed others to grab what might be the last you made, I think I'm gonna want to buy one of the upcoming Mini-with-a-new-button mods this time. The dual 18650 DNA20 is also still working great, and is a refined monster.
Want to reveal a little about what wood(s) are in this Mini batch?
There's 3 mini's im working on. The woods are:
Brazilian Ebony / MarbleWood
Brazilian Ebony / PurpleHeart
Brazilian Ebony / Cocobolo <--- This will be the very last time I use Cocobolo, Im highly allergic to the dust.
Congrats on the house! 
I was one of the lucky ones in the last batch, #78. I am enjoying the heck out of it, thank you. Cocobolo you say? Has to be my all time favorite. Going into ninja mode. ;-)
I was one of the lucky ones in the last batch, #78. I am enjoying the heck out of it, thank you. Cocobolo you say? Has to be my all time favorite. Going into ninja mode. ;-)
- Status
Similar threads
- Locked
- Locked