mechanical mod problem, help

[Stinkytofus]

i vaped until it didn't vape anymore, then i took the mech mod apart

the firing pin (made of copper had green liquid on it)

the negative part of the battery where the firing pin touched had a burn in of copper in it)

whats going on? i shorted? using a clt infinite v2 plus, i checked the ohms a few times on an ohm meter, it reads .65 consistent, but after 10-20 pulls, this happens

third pic, there is a brown section starting form the negative post... wth?

 

[Stinkytofus]

okay ... i checked the atty, i shorted my mech... firing button melted a little bit, scrapped it off with an flat mini screwdriving, has scratch marks on the firing pin now,

a. battery is not hot, but according to the third picture, there is a very noticeable brown spot behind the green insulator, is the battery no good? or usable?

b. is the mech usable? do i need a new firing pin?

 

[roxynoodle]

I would ditch the battery myself. My hands and face are more important to me than the battery.

As for the mod, clean it off and check the insulator.

 

[Kevin littell]

I would ditch the battery myself. My hands and face are more important to me than the battery.

As for the mod, clean it off and check the insulator.

+1 10chars