Mechanical reos will be seeing some upgrades

[swamijivan]

is it possible to list the squonk tubes with nipple, gasket and flanged tube also???

and the plastic part that holds the squonk tube in to the juice bottle for press fit not screw type???

thanks rob your the best

... and spare center pins with nut for tube..?

 

[Filthy-Beast]

is it possible to list the squonk tubes with nipple, gasket and flanged tube also???

and the plastic part that holds the squonk tube in to the juice bottle for press fit not screw type???

thanks rob your the best

If you mean the metal center pin get the rebuild kit and spare bottle and you'll will have all those pieces and a spare spring and bottle. If you mean reducer tube, then order tube, spare bottle and reducer tube. The spare bottle comes with the nipple. remember using the nipple instead of bottle top is a user mod not a factory option.

 

[Taylor7617]

The spare bottle comes with the nipple. remember using the nipple instead of bottle top is a user mod not a factory option.

Can you explain this? As I've not seen this up close, not sure what you mean.

 

[Filthy-Beast]

Can you explain this? As I've not seen this up close, not sure what you mean.

Some juices can swell the o-ring in the bottle cap, so people pull the cap, clip the drip nipple for the bottle and use that. See this thread for details and a pic http://www.e-cigarette-forum.com/forum/reos-mods/521257-just-did-bottle-mod.html

 

[jifjifjif]

Just FYI, I did this because I like to tinker, but I personally found it more of a PITA then before. I find it way easier to refill the bottle by unscrewing the bottle the way that Rob created it. I went back to the original setup. Just in case anyone is wondering.

 

[redeyedancer]

Rob, When you get the kits ready can you list just some springs I'd like to have spare in case I drop one of the new ones.

No problem there will be plenty of springs . I will remove the old springs and replace them with the super golds as soon as the stock arrives

is it possible to list the squonk tubes with nipple, gasket and flanged tube also???

and the plastic part that holds the squonk tube in to the juice bottle for press fit not screw type???

thanks rob your the best

All these will be in the rebuild kits

... and spare center pins with nut for tube..?

 

[redeyedancer]

Just FYI, I did this because I like to tinker, but I personally found it more of a PITA then before. I find it way easier to refill the bottle by unscrewing the bottle the way that Rob created it. I went back to the original setup. Just in case anyone is wondering.

I concur unless your vaping some evil juice the stock set up is the way to go

 

[ltrainer]

Rob,

Will you also be making some gold springs for the Woodvils? I am interested in changing my woodvil to the new spring. I soldered in a modified (drilled a new hole) Grand spring in my Woodvil when I popped one.

 

[redeyedancer]

Rob,

Will you also be making some gold springs for the Woodvils? I am interested in changing my woodvil to the new spring. I soldered in a modified (drilled a new hole) Grand spring in my Woodvil when I popped one.

Yes I will have them as well . I just passed in the print for some sub ohm positive contacts for the wood mods as well . Everything I build from this point on will be sub ohm rated

 

[Filthy-Beast]

Yes I will have them as well . I just passed in the print for some sub ohm positive contacts for the wood mods as well . Everything I build from this point on will be sub ohm rated

ME can hardly wait for the sub ohm mechanical Woodvil

 

[Raynman]

My Hero! Thanks Rob!

 

[jifjifjif]

ME can hardly wait for the sub ohm mechanical Woodvil

You and me both, brother. Once I have one of these, I will be 100% happy with my vape gear. A Grand and a mechanical Woodvil is all I need.

 

[4Yankee]

So is the grand I ordered this morning retrofitted?

Sent from my mind using telepathy

 

[Filthy-Beast]

So is the grand I ordered this morning retrofitted?

Sent from my mind using telepathy

No It won't

As soon as I have the mods on the site retrofitted with the new contacts I will make it visible on the web page as soon as you open up the grand or mini mods page at the top of the page it will say all these mods have been upgraded with sub ohm kits _________ . I no many of you are excited to get these . I am excited to get them myself .

Just to update so people stop asking me all the metal mods will be equipped with the new sub ohm magical roast your lung contacts .
I was told I would get my first shipment by the end of this week . Will I get them I hope so but with this companies track record a little delay wouldn't surprise me .
The first thing I plan to do is load kits on the site . I will then start retrofitting all the mods I have in stock that are on the website .

 

[4Yankee]

Serves me right for getting ahead of myself and not reading. Sorry about the temporary ......ation.

Sent from my mind using telepathy

 

[Jonathan Rizo]

Serves me right for getting ahead of myself and not reading. Sorry about the temporary ......ation.

Sent from my mind using telepathy

Don't worry, SO kits will be coming out, just pick one of those up! I ordered mine a few weeks ago knowing they would be out soon but I just HAD to have a REO... believe me it was no mistake. Just be sure to stay in the safe range until you get an SO kit.

 

[4Yankee]

Don't worry, SO kits will be coming out, just pick one of those up! I ordered mine a few weeks ago knowing they would be out soon but I just HAD to have a REO... believe me it was no mistake. Just be sure to stay in the safe range until you get an SO kit.

The wife drew a line in the sand so it'll be quite some time before I get into rebuilding.

Sent from my mind using telepathy

 

[Jet Knight]

Will be needing a couple of those kits myself, hope they are easy to install.............just waiting

 

[Taylor7617]

Yeah....but if it's purchased as a complete kit the price will only increase a couple dollars (per previous comments). Buying now and then upgrading yourself will cost more as the SO kit is something like $25 last I recall. That said, the benefit of having the unit now probably out weights the added $20+ cost factor. I actually should do this too, I'm just being cheap.

 

[Filthy-Beast]

Will be needing a couple of those kits myself, hope they are easy to install.............just waiting

If you go to his site he has a video of the rebuild process right on the kit page.