Mechanical reos will be seeing some upgrades
- Thread starter redeyedancer
- Start date
- th_trl_thread_readers 0
- Status
well... looks like its back to stalking the mailman tuesday/wednesday/thursday...
son of a... those are the days im out in the field... luckily my unit is full of a bunch of spoiled higher ups so... only out in the field from 9 to 5... lol... roughing it... lmao
me too.. 
My button melted again... Out till I get the kit. Using the Mini now with higher ohm coils.. lol
My button melted again... Out till I get the kit. Using the Mini now with higher ohm coils.. lolme too..
My friend kept melting his button on a .13 ohm coil. I drilled a small hole in the bottom of the button and pushed in the firing pin from an Evod head. so far he had not reported any more melted button. It's been 2 days. Just a thought. I wanna say it was a 3/32 bit.
Sent from my SM-N900V using Tapatalk
Thanks. That would make sense. If i wasnt getting the new kit Id try it out.. Im sure it does work.. Good idea..
Just make sure with any button mod like this, involving a conductive material, that you don't allow the material to have possible contact with the body in any way as this would create a short.
That being said I am sure you are fine. I have seen the evod piece you are referring to and it is plenty small enough. I just want to make sure anyone that may read understands the risks.
That being said I am sure you are fine. I have seen the evod piece you are referring to and it is plenty small enough. I just want to make sure anyone that may read understands the risks.
I sent my wrecked Reo Grand in for a mill job and a s/o kit install... even sent him the Origen2 b/f to make sure it fit.
Whenever Rob gets around to it, at least I know it will be good to go...
In the meantime I have a fuse and pin modded Grand from Pdib to keep me in sub ohm b/f heaven anyways... 0.40 ohms RM2 ... otherwise I'd be bouncing off the walls.
Gotta say, it's the ONLY WAY to fly...
Whenever Rob gets around to it, at least I know it will be good to go...
In the meantime I have a fuse and pin modded Grand from Pdib to keep me in sub ohm b/f heaven anyways... 0.40 ohms RM2 ... otherwise I'd be bouncing off the walls.
Gotta say, it's the ONLY WAY to fly...
Sub ohm kits will be back in stock on Wednesday .
All the mods on the site will have the new contacts as well
All the mods on the site will have the new contacts as well
Woohoo! Now I just need to wait for an LP black wrinkle and RM2 to be back in stock and I'll have my 1st reo!
EDIT: What are some accessories I should purchase as well?
Last edited:
That's great news. I'm hoping to get a black wrinkle lp grand. Is it possible to get a new cap for my RM2?
Woohoo! Now I just need to wait for an LP black wrinkle and RM2 to be back in stock and I'll have my 1st reo!
EDIT: What are some accessories I should purchase as well?
Spare screws for the RM2, If the new springs are listed as a separate item, one of those. you'll get two bottles, maybe a spare. If you use strong juices maybe a spare tube. Thicker 1.5mm o ring.
About to order my first as well...may wait until the immediate rush is over and let him restock, not sure. Anyway....if a thicker o-ring is recommended, any reason why this isn't stock? Why the two sizes? Assume....this is the o-ring set into the drip well to prevent any additional leaking coming out of the 510 connection of the unit & RM2? Thanks.
Some people find that the thicker oring works better when trying to position the airhole on the RM2. For example. With the thin ring, your airhole may be at the 3 o'clock position, when you really want it at the 12 o'clock position. The thicker ring may stop the airhole better at 12 when tightening.
You may have to adjust the RM2 center pin out a little bit to make good contact on the REO center pin. The RM2 pin is threaded, so turn CW for in, and CCW for out.
The thicker o-ring is to make sure your air hole is lined up right. http://www.reosmods.com/index.php?option=com_virtuemart&page=shop.browse&category_id=32&Itemid=3 First on the list it was just located somewhere other than where you would expect.
Well I did say I'd wait a week until after they come in to order mine. So I'm looking at 4/30, now just to get my order ready. Fair warning Rob PM coming from a PITA next Wednesday.
- Status
