Medusa Vrd final is in for testing, pics within!

[badkolo]

The Medusa VRD final is in for testing, beta testers have been prechosen and will be testing them shortly.

 

[yiddleboge6]

Can't wait to hear about these..

 

[dodari]

The Medusa VRD final is in for testing, beta testers have been prechosen and will be testing them shortly.

Holy Schiessen Rockets Commander!

How many coils are on that thing?

 

[badkolo]

one for each ohm, its a doozy, this is what modding is about, you like changing coils, then here you go. and as promised totaly new improved head and yes first one in states like promised

 

[dodari]

one for each ohm, its a doozy, this is what modding is about, you like changing coils, then here you go. and as promised totaly new improved head and yes first one in states like promised

Holy cow and little fishes.

From your pic above, it looks like 4 or 5 separate distinct coils? What an intriguing challenge this shall be! Should I have my SS check sent directly to y'all? Please allow me a $10/week allowance out of it, OK?

 

[VapingTurtle]

Holy cow and little fishes.

 

[nathkiira]

 

[dodari]

Ummmmmm, let's see.

Maybe my kitten's breath after she's been fed a cod-fish?

 

[stauglocal]

I envy the prechosen testers big time.

 

[badkolo]

there will be 2 more chosen spots, 3 have shipped and they will add their review and opinion and we take it from there..

 

[stauglocal]

I'd be more than happy to take one of those spots, if possible.

 

[nathkiira]

<begin rant>to all those that have or will post negative comments about this device .. we haven't tested it yet...and are going to have it thoroughly tested, this is NOT the same version that has been out there in Europe .. please stop and think ..and have a little respect that this is a vendor subforum </end rant>

thank you

 

[Harplayr]

<begin rant>to all those that have or will post negative comments about this device .. we haven't tested it yet...and are going to have it thoroughly tested, this is NOT the same version that has been out there in Europe .. please stop and think ..and have a little respect that this is a vendor subforum </end rant>

thank you

Well said!

 

[ThaHealer]

<begin rant>to all those that have or will post negative comments about this device .. we haven't tested it yet...and are going to have it thoroughly tested, this is NOT the same version that has been out there in Europe .. please stop and think ..and have a little respect that this is a vendor subforum </end rant>

thank you

I can only assume someone made a comment about the same review I saw recently. Honestly, I didn't see the use for this device at first and that review mentioned the same reasons I considered. VV/VW mods don't really need VR. Mechs are going to give a pretty bad vape at higher ohms. BUT, it's rebuildable and if it was the same review there were a few things that got overlooked. As a platform, I think this has tremendous potential. From what I can tell, someone could rebuild it with only two coils at say 1.5 ohms. You could then switch between single 1.5ohms or dual .75ohms. You could build three singles at .8ohms, 1ohm, and 1.2 ohms then switch between the three throughout the day or according to the juice being used, just as many of us do with VV/VW. Personally, I think the device would be best with the settings labelled A, B, C etc, a "map" to which posts fire with each setting and no factory coils. At that point, it's just an empty platform with nearly endless setup possibilities AND adjustable on the fly. Of course it could still be used that way regardless of what the markings say. I think once people get to fiddling with this they will find ways to bring out it's potential and we will see all kinds of wild and well-performing setups.

 

[keelalagirl55]

I can only assume someone made a comment about the same review I saw recently. Honestly, I didn't see the use for this device at first and that review mentioned the same reasons I considered. VV/VW mods don't really need VR. Mechs are going to give a pretty bad vape at higher ohms. BUT, it's rebuildable and if it was the same review there were a few things that got overlooked. As a platform, I think this has tremendous potential. From what I can tell, someone could rebuild it with only two coils at say 1.5 ohms. You could then switch between single 1.5ohms or dual .75ohms. You could build three singles at .8ohms, 1ohm, and 1.2 ohms then switch between the three throughout the day or according to the juice being used, just as many of us do with VV/VW. Personally, I think the device would be best with the settings labelled A, B, C etc, a "map" to which posts fire with each setting and no factory coils. At that point, it's just an empty platform with nearly endless setup possibilities AND adjustable on the fly. Of course it could still be used that way regardless of what the markings say. I think once people get to fiddling with this they will find ways to bring out it's potential and we will see all kinds of wild and well-performing setups.

And THERE is the open mind of a true tinkerer Very well thought out!

 

[badkolo]

I can only assume someone made a comment about the same review I saw recently. Honestly, I didn't see the use for this device at first and that review mentioned the same reasons I considered. VV/VW mods don't really need VR. Mechs are going to give a pretty bad vape at higher ohms. BUT, it's rebuildable and if it was the same review there were a few things that got overlooked. As a platform, I think this has tremendous potential. From what I can tell, someone could rebuild it with only two coils at say 1.5 ohms. You could then switch between single 1.5ohms or dual .75ohms. You could build three singles at .8ohms, 1ohm, and 1.2 ohms then switch between the three throughout the day or according to the juice being used, just as many of us do with VV/VW. Personally, I think the device would be best with the settings labelled A, B, C etc, a "map" to which posts fire with each setting and no factory coils. At that point, it's just an empty platform with nearly endless setup possibilities AND adjustable on the fly. Of course it could still be used that way regardless of what the markings say. I think once people get to fiddling with this they will find ways to bring out it's potential and we will see all kinds of wild and well-performing setups.

I couldnt of said it better myself, you get a beta

 

[ThaHealer]

I couldnt of said it better myself, you get a beta

Wow I wasn't expecting that! Disclaimer: I am in no way responsible for any angry pm's/posts generated by the girlfriend while happily tinkering away the weekend in the vape lair

 

[Mark Todd]

if it was the same review there were a few things that got overlooked.

Hi

If it was my review I'm curious to what you think I over looked, what I was supplied with was what I was told was a production version and the review was done on the device as it was intended to be used.

If indeed this was not the final production version that C-tratech are selling to vendors then I will happily go back and add an amendment to that review.

If you watch any of my vids you will see that I never stop tinkering with stuff, it's the best bit about vaping for me but I can only go on the information and gear that I am supplied with

All the best

Todd

 

[badkolo]

Hi

If it was my review I'm curious to what you think I over looked, what I was supplied with was what I was told was a production version and the review was done on the device as it was intended to be used.

If indeed this was not the final production version that C-tratech are selling to vendors then I will happily go back and add an amendment to that review.

If you watch any of my vids you will see that I never stop tinkering with stuff, it's the best bit about vaping for me but I can only go on the information and gear that I am supplied with

All the best

Todd

oh todd you did a excellent review, there where minor modifications like tighter screw point and based on your video i think I can even have it adjusted so it isnt as packed an unorganized when its done and coiled up, it may be a little daunting and there are changes i already see should be made such as a letter system since you will never get the exact resistance to match the dial and some other stuff. Recoiling it gave better results then out the box for me and other then ce2 or attys i dont trust china to coil up rba's or beasts like this.

I sent them out to testers form very experienced to moderate and we should have results in a few days but unlike others if i think something has possibilities and the factory is willing to improve then im all for innovation.

 

[Mark Todd]

that really is the best feedback I could have hoped for, so pleased that you are getting further development on this

I will mention this where I can.

ATB

Todd

Sent from my shed by TJ