Doubtful. Just a really good beci cart and atty combo. Cart is a lot more crucial than you think. The BE112 itself is not my favorite atomizer anymore, but it *is* my favorite one to use carts with because of how great their carts fit and work.
Merged old Janty Stick sticky threads
- Thread starter Ludo
- Start date
- th_trl_thread_readers 0
- Status
Doubtful. Just a really good beci cart and atty combo. Cart is a lot more crucial than you think. The BE112 itself is not my favorite atomizer anymore, but it *is* my favorite one to use carts with because of how great their carts fit and work.
The Stick body dimensions:
length: 7.5 cm
width: 2.5 cm
depth: 1.7 cm
The JANTY™ Stick set contains:
1 x Stick Body V2 improved
2 x SPECIAL E-cig rechargeable batteries 360 Mah (not AAA battery!!!)
1 x Classic Atomizer (JANTY original classic atomizer under warranty)
1 x Stick dedicated USB-E cable 0.75 cm or 1.50 cm (according to availability) for charging and vaping through USB port computer, power outlet or car
5 x Free classic cartridges
1 x Special carrying pouch
1 x Manual
JANTY STICK V2
length: 7.5 cm
width: 2.5 cm
depth: 1.7 cm
The JANTY™ Stick set contains:
1 x Stick Body V2 improved
2 x SPECIAL E-cig rechargeable batteries 360 Mah (not AAA battery!!!)
1 x Classic Atomizer (JANTY original classic atomizer under warranty)
1 x Stick dedicated USB-E cable 0.75 cm or 1.50 cm (according to availability) for charging and vaping through USB port computer, power outlet or car
5 x Free classic cartridges
1 x Special carrying pouch
1 x Manual
JANTY STICK V2
Just got mine in the mail. The mini usb connector is a 5 pin. The usb cable is about 4 feet long and seems to be at least 12 inches longer than my battery pass-throughs.
Wolf,
As mine just shipped today i will most interested in hearing your initial thoughts. I'm currently vaporing the 510 manual switch with enough pleasure/satisfaction to find me in my 7th week off analogs (still stunned that it is possible).
Hope the JS is a step up and then i'll certainly wish to do nothing at all but vape. There must be "something else" in these things......maybe famous BOB DOBBS's elusively defined 'frop'.
Slackingly,
Mike
See Church Of The Subgenius & BOBB Dobbs
Maybe i'll be moved into the religion thread after all,
Thank Bob for raspberry
frapachino
As mine just shipped today i will most interested in hearing your initial thoughts. I'm currently vaporing the 510 manual switch with enough pleasure/satisfaction to find me in my 7th week off analogs (still stunned that it is possible).
Hope the JS is a step up and then i'll certainly wish to do nothing at all but vape. There must be "something else" in these things......maybe famous BOB DOBBS's elusively defined 'frop'.
Slackingly,
Mike
See Church Of The Subgenius & BOBB Dobbs
Maybe i'll be moved into the religion thread after all,
Thank Bob for raspberry
frapachinoI have used my v2 for 2 days and have had problems from the start. It seems to have something sticky on it because it will not leave my hand !!! lol Really I was worried about ordering one but so glad I did, so far no problem, works great.
Thanks Ethan..... you the Man !!
Thanks Ethan..... you the Man !!
The V2 has a faulty button. It doesnt work unless you push down HARD. I am sending it back and keeping the V1 replacement they gave me in the beginning. It does much more vapor also.
So far I'm loving it, when I can pry it out of my husband's hand. The long pass-through cord is long enough that I can plug in to my computer tower and not turn and rip it out of my mouth. Hubby had it plugged in to his lap top for hours yesterday. I have to get him back on his e-cigar or buy another JS. I don't have a 510. I went from a 901 to an 801 to the cigar (atty issues) so I invested in the JS. I'm also in the process of making a few NicoStick box mods. Hoping hubby will prefer the all black with no lights.
Zesto your atty came with a mouthpiece on it that had no white cart attached. Or at least mine did. You can use that.
I've been using my replacement V2 (Thanks, Ethan) for several days now so it's time to sum up.
Overall, I like it and will use it as my preferred 3.7 volt device.
Pros:
Form factor is excellent.
Excellent amount of vapor.
Good flavor.
Easy to carry and use.
Doesn't look like a cigarette.
Provided holster is stylish and useful.
Cons:
Light hit, even for a 3.7v batt. "Double dragging" helps.
Battery is difficult to change on the run. Cap too easily lost.
Atomizer is difficult to change - requires a tool to get it screwed in enough to make contact.
I haven't had the V2 long enough to comment on the switch. So far, so good.
Overall, I like it and will use it as my preferred 3.7 volt device.
Pros:
Form factor is excellent.
Excellent amount of vapor.
Good flavor.
Easy to carry and use.
Doesn't look like a cigarette.
Provided holster is stylish and useful.
Cons:
Light hit, even for a 3.7v batt. "Double dragging" helps.
Battery is difficult to change on the run. Cap too easily lost.
Atomizer is difficult to change - requires a tool to get it screwed in enough to make contact.
I haven't had the V2 long enough to comment on the switch. So far, so good.
Definitely going through a learning curve with this new JS.
Partially because I'm completely new to vaping no doubt.
My only real challenge is that I too agree that the vapor is light on a "normal" draw.
I find that if I Power-Drag as hard as I can at first, then continue to inhale with my lungs, that I can taste a decent amount of flavor and get that youtube video review "cloud" of vapor that sold me on the JS in the first place...
That being said, there may be another trick or 2 I'm bound to learn shortly that will allow me to NOT look like I'm having an asthma attack every time I vape this thing!
Partially because I'm completely new to vaping no doubt.
My only real challenge is that I too agree that the vapor is light on a "normal" draw.
I find that if I Power-Drag as hard as I can at first, then continue to inhale with my lungs, that I can taste a decent amount of flavor and get that youtube video review "cloud" of vapor that sold me on the JS in the first place...
That being said, there may be another trick or 2 I'm bound to learn shortly that will allow me to NOT look like I'm having an asthma attack every time I vape this thing!
Oh, I should probably mention that, although I don't think anything was permanently damaged, I did have a "near miss" with the button today.
I must have mashed it a little too hard because it stuck down after I released...
Of course I immediately panicked and mashed the button like 5 more times and the dimple went away...
So far everything's back in working order... Or so it seems.
I must have mashed it a little too hard because it stuck down after I released...
Of course I immediately panicked and mashed the button like 5 more times and the dimple went away...
So far everything's back in working order... Or so it seems.
Got mine today...very nice...had a bit of user error issues with the atomizer (make sure it's screwed all the way in if you expect it to work), but once that was taken care of, it's been a champ all day....love it....
What's the diff between v1 and v2? I have both (my wife killed v1 in 2 days 
I'm using v2 ( I kinda miss my engraving on my first one D.F.T. Don't F&*$(*^ Touch wish my wife woulda knew what it ment. I had the problem with the getting crossed eyed with v1 but it worked good enuff. V2 looks just like V1. was even wondering if I got a V1 instead. Is there a diff that you can see? or will the button start getting wierd on me in a couple of days like V1 did.
Help with this please going crossed eyed again from just checking.
I'm using v2 ( I kinda miss my engraving on my first one D.F.T. Don't F&*$(*^ Touch wish my wife woulda knew what it ment. I had the problem with the getting crossed eyed with v1 but it worked good enuff. V2 looks just like V1. was even wondering if I got a V1 instead. Is there a diff that you can see? or will the button start getting wierd on me in a couple of days like V1 did.Help with this please going crossed eyed again from just checking.
You cant tell until you open one:
1. V2 has better sealed compartments inside, uses better glue but due to pressure when glueing you might find some resistance from glue residue on the screw (the first times you screw the atomizer inside the atomizer compartment it might be a bit hard, this will eventually get better after a while - some reside glue will probably come loose and form then on the atomizer will fit better.)
2. The V2 switch is better glued and should not come loose easily
1. V2 has better sealed compartments inside, uses better glue but due to pressure when glueing you might find some resistance from glue residue on the screw (the first times you screw the atomizer inside the atomizer compartment it might be a bit hard, this will eventually get better after a while - some reside glue will probably come loose and form then on the atomizer will fit better.)
2. The V2 switch is better glued and should not come loose easily
When I screw my Atty in and I get it to work
I don't get a flashing light?
Does that mean I got a V1?
I don't get a flashing light?
Does that mean I got a V1?
Hi,
Lots of things can cause low vapor/low TH:
Juice - more VG = more vapor
Juice - more PG = more taste (generally)
Juice - more nicotine = more TH (generally)
Battery - marginal performance - try a different battery
Battery charge - try it on the passthru
Atty - some are better than others - try a different one
Cartridge - not enough or too much juice - try vaping it (almost) dry then refreshing
I go through this routine all the time and it's usually one of those. If cigarettes weren't trying to kill me, I'm not sure I'd put up with all this futzing about to get PVs to work consistently.
- Status
Similar threads
- Locked
