Merged old sticky threads (2)

[nubee]

I'd have to go with ladyraj on this one as my Janty Classic atty that shipped with my JStick out lasted 4-5 TW attys.

Plus, the whole look and feel of the Janty attys is much more robust. They feel a bit heavier/sturdier and the bridge is really beefy - at least compared to my TW's.

 

[TokenLefty]

That should have read 4072. Is the Totally wicked version an 801 or 4072?

 

[Richie G]

That should have read 4072. Is the Totally wicked version an 801 or 4072?

TW's is an RN4072. My experience is that they leak. When you receive them, I think you're going to find that the Joye 302 is a quality atty. Some say they are identical to the Janty KB. I like the Joye's even better than the KB.

Note: I've used 4 KB attys and only one Joye 302. The 302 is nearly a month old and is kicking .... like day one. YMMV, as they say.

 

[Magnetron]

Please can someone give me a contact e-mail for Janty. I placed my order on 11/3/2009 they charged my card.. they never sent me an Email conformation. I went to log in so I could make a help ticket, it booted me out, so I sent a request to get my user name and password but nothing comes to my e-mial.. I would be very grateful if someone here could help me with gettign a hold of these guys..

Thanks

 

[geeker]

PM MikJanty
They really need to fix their ordering system

 

[ladyraj]

helpdesk@jantyusa.com or orders@jantyusa.com

And...check your spam filters. Sometimes I don't receive a confirmation of the order but ususally it gets thru . Hope this helps

 

[Magnetron]

OMG!!! Thank You!!!!!!!!! I was about to have a fit!!! Duuuuude!!! The Website and HelpDesk system needs major help!!!

 

[ladyraj]

DigitalC you are going to love the JS. I have 4 and after a brief learning curve where others on this site helped me out I was in vaping heaven. Ethan will respond to you quickly if not today, by tomorrow. As a side note...I purchased the limited edition JS way back when preorders were solicited and production was held up. My card was charged right away and my CC bill came twice before the product was shipped. Janty made good with lots of extras. They have always stood by their warranty and have earned my trust as a great company.

Orders are usually shipped out the same day if made before 3PM if the articles are in stock. When I checked the site yeaterday I saw a notice that JS orders will be shipped by 11-19-09. Ethan or Jeff could confirm this once you email them!

 

[Magnetron]

Thanks for the encouragement..I wrote both e-mails above...so we will see if I get a response.. glad you like your stick!

 

[AngeLsLuv]

520's haha I meant 510 but you all knew that already....

 

[ladyraj]

Thanks for the encouragement..I wrote both e-mails above...so we will see if I get a response.. glad you like your stick!

Please let us know if the emails worked and the issue gets resolved. We Janty addicts love attracting others to the dark side and if those efforts are worthwhile!

 

[nubee]

ethan@jantyusa.com is my 100% garantee of service!!!

 

[esz]

have some resistance picture in 510adapter
1 is R in second batch adapter value is 0.22ohm
2 is R in first batch adapter value is 0.68ohm

 

[Kelemvor]

if they are empty ..yes

fully charged they should read ~4-4.2V

 

[Mik_Janty]

Hey guys,

just to let you know that i have designed a silicone case for the JS - no clue if its something we will produce though, but i will let you know as i hear something!

=)

 

[steven.rn]

Agreed!! But what possible electrical reason could they have? All we'er trying to do is connect the 3.7 volt battery to the atty. Literally just replace the 810 connector with a 510 connector. It should be a direct contact. A resistor could serve no purpose but to decrease performance.

What's really disappointing is that we've been discussing this on these threads and no one from Janty has addressed it. I even PM'd Ludo a few days ago and he didn't respond. I asked Mik in another thread and he told me to ping Ludo.
Janty NEEDS to come forward and tell us all who invested $20 in thier product why they put this performance-reducing component in!!!

You'll recall that the product was out there a while ago and people were unhappy so they pulled it to fix it. This "new" model has zero change.

C'mon Janty, tell us what's going on!

Dude... I think by now that just ain't gonna happen.

 

[menthollight]

have some resistance picture in 510adapter
1 is R in second batch adapter value is 0.22ohm
2 is R in first batch adapter value is 0.68ohm

Thanks for the details of the old and new adapter resistance and the pictures.

 

[HokieSmokie]

I have been going through my old atomizers seeing if any could be revived and tonight took one of my TERRIFIC but totally spent Janty 801 attys that I used on my JantyStick and a can of air and blew into the end with the threads. Put it on my JantyStick and it glowed red again after holding the button down for a bit and blowing into the atomizer .. Coincidence?? Or??

 

[TokenLefty]

The 302's that I ordered showed up today. They work great! Which is a good thing since Janty isn't keeping up with stock anywhere. I don't know if they have customs problems and/or production problems but it's good to have a second source for atty's that are much cheaper. The 4072 that I have works great but it leaks. So far the 302's have no issues at all and work as well as the ones that came with the stick. I went out to TW's site and they are also out of stock on the 4072's or screwdriver atty's as they call them. It's almost like a conspiracy out there with pen style....

 

[Ludo]

Janty atty's use a different heating coil! Our heating coils are not produced in China, we import them from Europe. They last much longer