You posted this in your twitter, blog, chatbox, whatever, so you must expect some response to it. What is it?
- Status
You beat me to it, I was fixing to ask the same question?? So Mik, what say you??
Mace
Mace
I know they're out of stock on Jantys' site. Anyone else carry them? Any third party adapters out there?
My Janty Stick V1 died this week, put in a ticket yesterday to see what can be done. No reply yet. The button lights up then turns off intermitently, then flashes red, but no power seems to be getting to the atomizer, tried a couple of different atomizers and nothing.
This sounds like a power problem. Have you tried switching batteries? Sometimes placing the stick upside down to drain overnight or a full day will remove internal gunk from the connections.
I believe Janty takes a break on weekends so you may not hear anything until Monday. Good luck!
I believe Janty takes a break on weekends so you may not hear anything until Monday. Good luck!
try unscrewing the atomizer a little bit. i have at least one atomizer that causes this.
in my opinion it has a very soft nylon spacer and shortens when fully screwed in.
if thats the case, be happy it happened on the stick, a minipipe would be dead now.
in my opinion it has a very soft nylon spacer and shortens when fully screwed in.
if thats the case, be happy it happened on the stick, a minipipe would be dead now.
Maybe this will help w/o taking case apart-works for me
After you have smoked down cart by ~1/2 take out cart and mouthpiece.
Separate mouthpiece from cart or use spare.
Replace mouthpiece only on stick.
Smoke - I get lots o'vapor for 4 to 10 (approx. puffs)
Then BLOW INTO mouthpiece w/atty lit
- more vapor comes out HOT-do 2-3 "blows".
Tip stick upwards while in mouth and smoke - maybe you'll see more vapor
Repeat as necessary
Had stick for 2 months - still using original attys.
If this doesnt blow your atty (hasn't blown mine) you should be rewarded with a GREAT smoke.
The stick seems to more rugged than I thought.
For the first few times I tried this I did notice some leakage at the seams and usb plug but
it has stopped - guess this keeps the stick "cleaner".
May this will help
After you have smoked down cart by ~1/2 take out cart and mouthpiece.
Separate mouthpiece from cart or use spare.
Replace mouthpiece only on stick.
Smoke - I get lots o'vapor for 4 to 10 (approx. puffs)
Then BLOW INTO mouthpiece w/atty lit
- more vapor comes out HOT-do 2-3 "blows".Tip stick upwards while in mouth and smoke - maybe you'll see more vapor
Repeat as necessary
Had stick for 2 months - still using original attys.
If this doesnt blow your atty (hasn't blown mine) you should be rewarded with a GREAT smoke.
The stick seems to more rugged than I thought.
For the first few times I tried this I did notice some leakage at the seams and usb plug but
it has stopped - guess this keeps the stick "cleaner".
May this will help
Last edited:
Still no sign of the 510 adapters!! (a little bird at Janty told me they're coming REALLY soon though)
Quitter, are you sure it wasn't a little kitty cat?
LOL!!! I'll never tell! I'm sworn to secrecy!!
Hey guys!
As many of you have noticed we have had some stock issues lately. We have now switched liquid manufacturer but ofcourse we will retain our high standards within liquids as always.
Also the products we are now launching / working on launching at the moment are :
The Ego: Small size Baby J, running on a dura atomizer and a 300ish mAH battery - same design basically. I will post more on this when i can.
The Twinbox: a production of 200 units will be going ahead soon, and we will add adapters to all existing atomizers for this also. This unit price will not be high, and is ment as an accessory item for those who already has kissbox batteries lying around. We might even make it so it can use other batteries - we are looking into this now.
Liquid: We have changed liquid manufacturer, but will retain our high standard. This is also why we have had some stock issues lately - but hopefully this solves everything on that note.
Future: In 2010, we WILL launch our first high voltage product. Right now its going to run 4.5 volt (as the plan is) - but we might do selectable / multivolt. The problem why we have not done this yet is because we have to make sure our products are CE certified. Meaning basically that we cant just pop high voltage batteries in a product and "hope" it works - it has to be safe, and within some kind of regulation. But it IS coming. And hopefully early in 2010.
New website: Soon we will launch our CEBU magic website. The basic idea behind the Cebu Magic Circle is that we have a foundation aiding the children of CEBU: In short these are children living at dumpsites under very poor conditions. Right now our plan is to take X amount euro PER sold liquid bottle, and add to a counter, once this counter reaches X we will release that money to the CEBU foundation and aid them in their struggle for a better life. I will have more info about this soon.
Thats it for now - have a nice day!
/Mik
As many of you have noticed we have had some stock issues lately. We have now switched liquid manufacturer but ofcourse we will retain our high standards within liquids as always.
Also the products we are now launching / working on launching at the moment are :
The Ego: Small size Baby J, running on a dura atomizer and a 300ish mAH battery - same design basically. I will post more on this when i can.
The Twinbox: a production of 200 units will be going ahead soon, and we will add adapters to all existing atomizers for this also. This unit price will not be high, and is ment as an accessory item for those who already has kissbox batteries lying around. We might even make it so it can use other batteries - we are looking into this now.
Liquid: We have changed liquid manufacturer, but will retain our high standard. This is also why we have had some stock issues lately - but hopefully this solves everything on that note.
Future: In 2010, we WILL launch our first high voltage product. Right now its going to run 4.5 volt (as the plan is) - but we might do selectable / multivolt. The problem why we have not done this yet is because we have to make sure our products are CE certified. Meaning basically that we cant just pop high voltage batteries in a product and "hope" it works - it has to be safe, and within some kind of regulation. But it IS coming. And hopefully early in 2010.
New website: Soon we will launch our CEBU magic website. The basic idea behind the Cebu Magic Circle is that we have a foundation aiding the children of CEBU: In short these are children living at dumpsites under very poor conditions. Right now our plan is to take X amount euro PER sold liquid bottle, and add to a counter, once this counter reaches X we will release that money to the CEBU foundation and aid them in their struggle for a better life. I will have more info about this soon.
Thats it for now - have a nice day!
/Mik
Hey guys
Basically the Janty Drip-Filter is a filter that reduces the chance of you getting liquid in your mouth while DRIPPING , with 98%.
Its something i invented and have tested over the last two months - its a small change in the filter structure but works glorious for this purpose.
The reason i havent mentioned it too much yet is that im not sure when we will produce it - it depends on alot of things.
I personally think this is something we all could benefit from - well drippers anyway.
Basically the Janty Drip-Filter is a filter that reduces the chance of you getting liquid in your mouth while DRIPPING , with 98%.
Its something i invented and have tested over the last two months - its a small change in the filter structure but works glorious for this purpose.
The reason i havent mentioned it too much yet is that im not sure when we will produce it - it depends on alot of things.
I personally think this is something we all could benefit from - well drippers anyway.
Some kind of a labyrinthine type of arrangement, or an actual mesh kind of filter? Either way, I've never had much of a problem dripping anyway, I didn't realize it was a common problem. I tend to keep the LED pointed more or less down, which I guess limits how much liquid could get to the mouthpiece anyway.
Awesome- Thanks for the update Mik. That is very cool of Janty to help out a humanitarian cause in Cebu.
As far as the high voltage goes- so we won't be seeing any Baby J HV till atleast 2010?
As far as the high voltage goes- so we won't be seeing any Baby J HV till atleast 2010?
Seen a lot about the stick being improved somtime soon, and i was wonder how soon, soon is? like you are out of stock now, due to making the new version? or you will get to it somtime next year? I ask since i want to purchace a stick in the next month or so, and id hate to buy a v2 a week before the v3 comes out!
Yes i know you wont give exact dates, but few weeks, or next year would help a bunch!
Yes i know you wont give exact dates, but few weeks, or next year would help a bunch!
I had to do the same thing, but I use 2 whole tea bags folded up in my carts and find that works extremely well. Also, the vapor in the review you saw may have been because it was brand new.. there is a small break in period before you'll start bellowing out clouds of vapor. You can also purchase an 801 to 510 adapter from Altsmoke.com and use it with your Janty Stick. It's small, but it fits just enough so the tip of the cart is sticking out of the Janty Stick, allowing you to vape comfortably. The trick is to screw the 510 atty really tight into the adapter, and then lightly screw the adapter into the Janty Stick. Do not screw it in tight.. just keep turning it a little until it starts vaping, otherwise you can risk losing the adapter in the Janty Stick.
I also had the good fortune of being able to buy the 801 to 901 Janty Stick adapter while Janty had it for sale. I love the 901 attys on the Janty Stick. You might want to try that as well. You can purchase an 801 to 510 adapter from Altsmoke and then get a 510 to 901 adapter and use your 901 attys that way.. an atty on an adapter on an adapter. It should work though.
- Status
Similar threads
- Locked
