Merlin by Augvape and Roxy

[trentenmarschel]

Well been using the same battery since yesterday evening and the level shows just under half on the 2000 mAh. I just looked through the manual and have a quick question. How do I actually check the battery voltage? On the Lavatube I could hold the down button and it would display the voltage in the battery. @Eskie @MMW

 

[Vinnybagodoughnuts]

If you are talking about the Pico turn it off then hold the fire and the plus button.

 

[trentenmarschel]

If you are talking about the Pico turn it off then hold the fire and the plus button.

Another thread for the Pico said to put it into bypass mode. I just want to view the battery voltage left to see how low it is getting. I did the fire and plus button with it off and it gave me some scary menu with a M1 and some numbers after it that changed a little. Hope I didn't mess anything up lol.

 

[Vinnybagodoughnuts]

I'll check mine

 

[Fozzy71]

the m1/2/3 menu you are referring to is for setting the TCR values I believe.

 

[Vinnybagodoughnuts]

..I just tried mine and it did nothing but Fozzy is right don't worry.
It looks like they were right in bypass mode it shows the voltage of the battery on the bottom left.Sorry.

 

[trentenmarschel]

Must be a firmware thing..I just tried mine and it did nothing.
It looks like they were right in bypass mode it shows the voltage of the battery on the bottom left.

I turned it off and held the fire and plus button at the same time for like a full 10 seconds and it came up with that menu.

 

[Vinnybagodoughnuts]

I edited my post above.Fozzy is right that menu is for adjusting the TCR values.

 

[trentenmarschel]

the m1/2/3 menu you are referring to is for setting the TCR values I believe.

What should they be set to because I am sure I accidentally just changed mine?

 

[Vinnybagodoughnuts]

Eleaf iStick PICO 75W Kit Review | E-Cigarette Reviews and Rankings
This is where I got that info..I have never updated my Pico so not sure if that works after updating.Seems kind of a pain to have to check it in bypass mode but I don't really look at the voltage anyway.

 

[Vinnybagodoughnuts]

The TCR values are set according to the type of wire you are using.Are you using it in TCR? I can check the factory settings on mine if you want but it doesn't effect anything since you custom set them anyways.Thats the point in having it.

 

[Fozzy71]

Eleaf iStick PICO 75W Kit Review | E-Cigarette Reviews and Rankings
This is where I got that info.I have never updated my Pico so not sure if that works after updating.Seems kind of a pain to have to check it in bypass mode but I don't really look at the voltage anyway.

The update is pretty cool, especially if you use wattage. The display is better in normal wattage mode and the new smart mode sounds pretty awesome for wattage users that swap tanks with different ohm coils.

 

[trentenmarschel]

The update is pretty cool, especially if you use wattage. The display is better in normal wattage mode and the new smart mode sounds pretty awesome for wattage users that swap tanks with different ohm coils.

Haha, nice I just updated firmware and messed with the logo a little, Just put that it was mine on there. Wonder what will be next maybe a mp3 player in it. Listen to music while vaping.

 

[Vinnybagodoughnuts]

Can you try turning yours off Fozzy and pressing the fire and plus button?Just curious. Don't hold them for more then 5 seconds though.

 

[Fozzy71]

Can you try turning yours off Fozzy and pressing the fire and plus button?Just curious. Don't hold them for more then 5 seconds though.

I got the same as trent, m1/2/3 adjustment mode.

 

[Vinnybagodoughnuts]

Guess that reviewer was mistaken.
Sorry Trent its not like me to pass on bad info.

 

[trentenmarschel]

I got the same as trent, m1/2/3 adjustment mode.

When updating make sure to set the wattage back to what you want. Lol just figured that one out.

 

[trentenmarschel]

Guess that reviewer was mistaken.
Sorry Trent its not like me to pass on bad info.

It's fine I just updated firmware so I would think that would reset the settings.

 

[Fozzy71]

When updating make sure to set the wattage back to what you want. Lol just figured that one out.

Mine (all 7 or 8 of them) have been updated since as soon as I saw the update was available a few weeks ago. It resets everything to default which means max wattage in TC mode.

 

[Vinnybagodoughnuts]

@trentenmarschel Just watched the Pbusardo video.To check battery voltage turn it off and hold the fire and - button for 5 seconds.Just tried it on mine and it works.
Sorry for the hijack everyone forgot what thread this was.Back to your regularly scheduled program.