Merlin by Augvape and Roxy

[Manowar]

Hi guys
My merlin mini has stripped port screws.
Please any one could tell me where i can get replacements or alternative solutions
Cheers

 

[hittman]

Didn't it come with extras?

 

[Manowar]

Only 2 left. i change my coils alot. Worrying if they gone out

 

[VaPreis]

Who has these for the best price? I have two of them now, and they're the only tank I use anymore. I'd like to get a couple extras on the cheap.

 

[wheelie]

I ordered packs of 50 of about 12 different sizes and kinds. Did the very same with animizer seals. Type Animizer screws or animzer seal in the search bar. CHEERS!
FastTech - Gadgets and Electronics

 

[trentenmarschel]

So I went to clean and rebuild my coil on my Merlin yesterday, and when I was taking the tank apart, I thought I heard a small cracking noise, but I didn't see anything and figured it was just the threads breaking loose. So this morning I went to refill it, and then I saw a small crack at the top of the tank. I will post a picture. Anyone have this issue or use their tank with a small crack in it like this?

 

[Eskie]

I haven't, but that sort of stress crack in the glass will be stressed every time you screw the top down (not the fill cap but the part with the chimney) and if you go just tiny bit too hard it will crack straight down. I would replace that glass now before it's an issue later.

 

[trentenmarschel]

I haven't, but that sort of stress crack in the glass will be stressed every time you screw the top down (not the fill cap but the part with the chimney) and if you go just tiny bit too hard it will crack straight down. I would replace that glass now before it's an issue later.

Was kinda thinking that, but wanted to check. I'll replace it when I go to refill again later. I'll have to check and see if I even have another glass.

 

[Eskie]

Was kinda thinking that, but wanted to check. I'll replace it when I go to refill again later. I'll have to check and see if I even have another glass.

They do come with a replacement glass. I just keep those things in the original boxes, that way I know which glass goes to which tank.

 

[trentenmarschel]

They do come with a replacement glass. I just keep those things in the original boxes, that way I know which glass goes to which tank.

I know I've used one glass already, but they sent me some free non-tinted glass also.

 

[man00ver]

I haven't, but that sort of stress crack in the glass will be stressed every time you screw the top down (not the fill cap but the part with the chimney) and if you go just tiny bit too hard it will crack straight down.

This is why I don't even take that apart anymore. I just run hot water through the fill slots for rinsing, angling it this-way-and-that to hit all the inner glass surface, and shake it back out the same way. Good enough!

 

[wheelie]

So I went to clean and rebuild my coil on my Merlin yesterday, and when I was taking the tank apart, I thought I heard a small cracking noise, but I didn't see anything and figured it was just the threads breaking loose. So this morning I went to refill it, and then I saw a small crack at the top of the tank. I will post a picture. Anyone have this issue or use their tank with a small crack in it like this?

Yes no rime or reason why my tank cracked. Got on spare glass and immediately ordered 10 more authentic glass from FastTech.

 

[hiclass]

My habit is to always clean the whole Merlin tank when I re-coil.
I recalled, I have broken 3 Merlin glass tanks so far (I am using 2 Merlin tanks on daily rotation).
hehehe... my spare glass tank has long gone.
Btw, I always keep at least 2 spare Merline glass tanks available, as of this writing another one is being shipped from Fasttech to me.

 

[ricks]

When ever I buy spare glass for my tanks I never get to use them...

 

[tac_driver]

anyone have or see the new Merlins yet
AFC a lot higher up on the atty
no mention of a JFC
Merlin RDTA | augvape

 

[dave51]

anyone have or see the new Merlins yet
AFC a lot higher up on the atty
no mention of a JFC
Merlin RDTA | augvape

The original Merlin is an RTA this your looking at is a RTDA
Different critter all together different feed system this one might not leak like the original

Waiting for more info before I buy one

 

[man00ver]

anyone have or see the new Merlins yet
AFC a lot higher up on the atty
no mention of a JFC
Merlin RDTA | augvape

The RDTA is pre-sale now. I'll be having one or two, eventually.
Good deal HERE for the early bird.

 

[tac_driver]

I like the black and gold

DJlsb vapes had some things to say about it

 

[MMW]

Vapordna has the ss in stock.
Augvape Merlin Self Sealing RDTA | RBA

 

[ricks]

Vapordna has the ss in stock.
Augvape Merlin Self Sealing RDTA | RBA

Looking at the pics the positive terminal looks like it could easily break if too much pressure is applied tightening the screw.

Coiling looks to be a little difficult too. If you had 3 hands would be a little easier. LoL