mesh or wire rope

Status
Not open for further replies.

Kemosabe

Vaping Master
ECF Veteran
Sep 21, 2011
6,147
7,632
Roe Dylin
ive always had great wicking with both rope and 500 mesh, but mesh carries flavor better than rope. even with mesh wrapped under your wick on a rope build, the flavor is more muted than just pure mesh. some flavors this will be more evident on, like bakery vapes. tobaccos lose a slight amount of flavor with rope. for a fruit vape, rope aint half bad.
YMMV
 

Rule62

Vaping Master
ECF Veteran
Verified Member
Oct 28, 2011
5,765
15,339
Melbourne, Florida
Lately I've been using 3/32 rope, with 500 mesh just under the coil. Prior to that, I've been a confirmed mesh only user. But the rope/mesh combo is an easy, quick build. I just use enough mesh to go around the rope about 2 times; about 9/16 inch. I really don't find that this set up mutes flavor at all, and it wicks very well.
 

Kemosabe

Vaping Master
ECF Veteran
Sep 21, 2011
6,147
7,632
Roe Dylin
Lately I've been using 3/32 rope, with 500 mesh just under the coil. Prior to that, I've been a confirmed mesh only user. But the rope/mesh combo is an easy, quick build. I just use enough mesh to go around the rope about 2 times; about 9/16 inch. I really don't find that this set up mutes flavor at all, and it wicks very well.

That's good to know. I've only used thinner rope 1/16" I believe. So it's good to hear the thicker rope offers better results. Have you tried different varieties of flavors on it?
 

Rule62

Vaping Master
ECF Veteran
Verified Member
Oct 28, 2011
5,765
15,339
Melbourne, Florida
That's good to know. I've only used thinner rope 1/16" I believe. So it's good to hear the thicker rope offers better results. Have you tried different varieties of flavors on it?

Yes, I've run the gamut. I DIY all my juice, usually 50VG/50PG, all sorts of flavors. I used mesh only for probably 2 years; but just started fooling with ss rope a couple months back. So far, I've been pretty happy with it. I don't oxidize the rope at all. I just use a small piece of mesh under the coil area, and pulse oxidize it.
 
Status
Not open for further replies.

Users who are viewing this thread