- Status
Thanks for the spreadsheet Karen!
It's a huge help as I prepare to wrap my 1st micro coil (read 1st non-robcoil) with my new Artistic Coil Gizmo.
Micro coils & Duals here I come!
It's a huge help as I prepare to wrap my 1st micro coil (read 1st non-robcoil) with my new Artistic Coil Gizmo.
Micro coils & Duals here I come!
Ancient Puffer (Bill) keeps the spreadsheet updated!
I only started this thread, he made it easy to see the info and keeps it going!
Thank YOU Bill!
Hey AP, did you update the sheet with the info from my post? If you did you need to update it being dual coil... Sorry, I didn't mention that in my post... But then again the pics did show duals!!! Either way it should probably be noted on the sheet...
Yes, I did, and have re-updated to indicate the dual coils, thanks for the correction
I don't but there is this https://docs.google.com/spreadsheet/lv?key=0AiaRSDxC1vG6dC1HZEtmY0pPYzBvdUw2blJHVjdkc1E&usp=sharing
And there is another one that's updated with a little more info and coils ECT but I don't have a link for that hope it kinda helps man
And there is another one that's updated with a little more info and coils ECT but I don't have a link for that hope it kinda helps man
~ .55ohm....
5/64 = 1.98mm
These are approximate of course
9 wraps of 24ga .5ohm
11 wraps of 24ga .6ohm
Coil Toy - Online calculator for e-cigarette resistance coil building
5/64 = 1.98mm
These are approximate of course
9 wraps of 24ga .5ohm
11 wraps of 24ga .6ohm
Coil Toy - Online calculator for e-cigarette resistance coil building
Last edited:
Can somebody tell me how many wraps I need for dual coils using a 16G needle and 28G Kanthal to get about 1.2 Ohms?
that's not gonna happen. Ballpark, 10 wraps of 28g will net you about that. For duals, you need each coil to be 2.4 Ω. My thinker tells me that's about 20 wraps per coil. Won't even fit in most atties; much less get warm (unless you've got a DNA 30 device or something).
Looks like I've got some things to learn. Is there a good thread here giving info on the difference between building single and dual coils and one that might tell the difference between building coils on a mechanical vs a regulated mod?
Ditch that 16ga and rustle through a tool box and pull out a 5/64th drill. 10 wraps each of 28ga will get you right at 1.0 Ω Top of my head says 12 each will put you a bit over 1.2 Ω
Looks like I've got some things to learn. Is there a good thread here giving info on the difference between building single and dual coils and one that might tell the difference between building coils on a mechanical vs a regulated mod?
New to mech? Yeah don't attempt until you've read a few safety threads and looked at some charts.
APV Discussion
Thanks, Sirius. New to dual-coils. I'll go do my homework. Actually, I'm just curious because the RM2 on the Reo is just the cat's meow for me with 1.0 ohm single coils.
- Status
