Sub ohm coils in a Cyclone

[Rob.Gee]

Just finished building this.it's About .6Ω. This is my first dual coil on the cyclone and I'm liking it so far

 

[vlodato]

Where does one purchase the Cyclone and how does it compare to RM2, the only rba that I have used?? Thanks for help.

As train said I also only have a cyclone and I never used an rm2. I run my cyclone single 1.5mm micro coil 6/7 wraps 26awg comes to .7. I leave one hole completely open on the coil. I love it
Got mine from indy vapor I believe

Sent from my SM-G920T using Tapatalk

 

[Robfisher]

For my money, the afc cap version of the cyclone is a step down from the non-afc version. Sure, you can get more air and 2 holes for dual coils, but it's enlarged chamber takes it off it's game for flavour. The non-afc version is stellar in that regard.

100% Agree! No question!

 

[Spydro]

For my money, the afc cap version of the cyclone is a step down from the non-afc version. Sure, you can get more air and 2 holes for dual coils, but it's enlarged chamber takes it off it's game for flavour. The non-afc version is stellar in that regard.

I would. Now, if it turns out to be too tight a draw for your liking, you have two options: drill the hole (per the advice above) or get an afc cap. It's a very nice little atty.

100% Agree! No question!

I also agree with the above. I have two 2013 Cyclones, both bought used already drilled with big holes by a previous owner, and both were perfect for my DLH's because of that. At one time I entertained the idea of drilling a second large hole to run dual coils in one of them, but they both worked so well on a couple of 18650 Woodvil's as they were that they still reside there just running single RxW3 coils. The 2015 Woodvil's and Nuppin's see way more use than them, but if the 2013's had been more readily available back then I would have bought a bunch more of them. Not a fan of the Fusion DT I bought with one of them though. I Have no interest in the newer AFC version.

 

[JetMac]

I only use one coil in my cyclones, I only use the AFC caps on my cyclones - I don't MTL. With that said my single twisted coil builds usually come out between .45 and .5 ohms. I twist 26g kanthal on my drill, then once it's twisted together I'll wrap 5 wraps around a 1/16 bit and wick with rayon. The flavor is the best I've found and it produces really good vapor. I use cherry vapes friction tips in my AFC caps for wide bore. Here's some pics of my current build.

Sent from my iPhone 6 using Tapatalk