Mods by Chels - mini-ecig

[LittleDonkey]

The MicroSticks's bodies are back from anodising!
We got the first butch of 100 MicroSticks and all extenders.
The MicroSticks's bodies will soon pass the engraving. Meanwhile we hope that the bottom caps will also arrive from anodising.
So before we can start the shipping, we need to get the bottom caps.
The extenders need just a conductor to be ready for shipping.
The MiniGens SS and Ti are also almost ready. They can be blocked by engraving, but we hope that on the next week we will be able to start shipping.
Several MicroSticks are still available for pre-orders:
MicroStick (shipping in 15-30 days after payment) - Mini ECIG

We reduce the promised shipping date to 15-30 days. The next run has no settled shipping date yet, but it will be earliest in the end of March. So hurry up to catch this run!

 

[chadsmo]

Do you know if we're included in the 100 you just got if we ordered in the last 10 days ?? I assume from your post above the answer on that is yes ?

 

[76bridget]

Yes, I'd like to know where I'm at in that schedule too. My order # is 1522. I just ordered last week tho.

 

[glassgal]

Oh how cute!

 

[Linx8]

Will I ordered mine on Dec, 16th 2013, I hope I will get it soon it's about 33 days now


Linx8

 

[LittleDonkey]

Do you know if we're included in the 100 you just got if we ordered in the last 10 days ?? I assume from your post above the answer on that is yes ?

On 16th of December, we got orders for 133 MicroSticks. The first 200 of MicroSticks will go to those who ordered before 23/12.
So if you ordered in January, then you will need for the 3rd anodising butch.

But at the same time, from previous experience and from what the sub-contractor says now, we know that each next butch comes faster. It's like you're waiting for a long time for the shipping and then we start shipping about 100 every 2-3 days.

So we expect more MicroSticks to arrive from anodising during the next week. After the anodising we need to do engraving, assembling, packaging and finally shipping.

In other words, we are going to ship all orders within 45 days after the payment as promised. But definitely we will not ship all orders in one day and even in 1 week. Tried to be very clear

 

[LittleDonkey]

Yes, I'd like to know where I'm at in that schedule too. My order # is 1522. I just ordered last week tho.

My guess is the first week of February (3-9/02). It's hard to say more precisely.

 

[76bridget]

Thanks for the updates!

 

[Iowa Gal]

I've been using my GP Spheroid with my MicroStick with great success. Last night I set up my new Sophia and Slim tank by Leo and it's great as well. Today I hope to get my MiniGen set up...and will report back. I love a variety of juices throughout the day so am excited as I get multiple attys in the rotation.

 

[callmecletus]

I've been using my GP Spheroid with my MicroStick with great success. Last night I set up my new Sophia and Slim tank by Leo and it's great as well. Today I hope to get my MiniGen set up...and will report back. I love a variety of juices throughout the day so am excited as I get multiple attys in the rotation.

I am really liking the minigen set up with a micro coil and cotton. I drilled out the air hole to 1.5mm, and it's hitting like a champ. Running neck and neck with the Spheroid for time spent in the Microstick.

Sent from the backwoods of Maine.

 

[Iowa Gal]

I am really liking the minigen set up with a micro coil and cotton. I drilled out the air hole to 1.5mm, and it's hitting like a champ. Running neck and neck with the Spheroid for time spent in the Microstick.

Sent from the backwoods of Maine.

I will have to give that a try this afternoon....I really like the Microcoil/Cotton on my KFLs.

 

[glassgal]

I paid my paypal bill tonite, so that means I get shipped soon? I'm sooo excited!!!! When will the matching atomizer become avail? Can I use a Igo-F in the meantime? I'm really excited, thank you!!

 

[LittleDonkey]

I paid my paypal bill tonite, so that means I get shipped soon? I'm sooo excited!!!! When will the matching atomizer become avail? Can I use a Igo-F in the meantime? I'm really excited, thank you!!

Please, find here:
FAQ - Mini ECIG

What atomizers can be used with the MicroStick?
We recommend the MiniGen, and believe it compliments it perfectly!
However, MicroStick accepts any 510 atomizer up to 16mm in diameter. This includes Hellfire Mini, Spheroid, Kayfun Mini, Sturm G-Tank, Nahual, Aspire Mini Nova, etc.
The bottom air fed tanks, cartos are also ok. The 510 connector is shorter than normal, so the atty is never fully screwed into it. There always be enough space between the connector and the bottom of the atty for the air flow.
Don't try to drill the MicroStick to increase the atomizer hole. This will ruin it.

 

[LittleDonkey]

Shipping dates

We will start shipping of the MicroSticks 26-29/01. The orders will be shipped as soon as they are ready, so the whole shipping process will probably take about 2 weeks or maybe a bit more.

More than 150 MicroSticks were ordered 16/12 and 17/12, so the first ready MicroSticks will be shipped to them.
Orders placed in the middle of January most likely will be shipped in the beginning of February.

Anyway all orders will be shipped not later than 45 days after the payment date.

The MiniGens SS and Ti are almost ready. They should not delay orders with MicroSticks.
The extenders will be ready for shipping in the middle of the next week. The only missing part is the condutor pin.

 

[JollyRogers]

Very nice. I ordered 16/12, so I should be getting a shipping notice soon

 

[Iowa Gal]

I've tried setting up my MiniGen and not very good luck. I think the biggest issue for me is the small size. If anyone here has found an easy build could you please share via pictures or video. I have it running just not very well.

 

[callmecletus]

I've tried setting up my MiniGen and not very good luck. I think the biggest issue for me is the small size. If anyone here has found an easy build could you please share via pictures or video. I have it running just not very well.

Iowa Gal, I can take a pic of my set up after work tonight if it will help. I did a 1.5mm coil and used a piece of sugar and cream cotton yarn to wick. I would do a full rebuild with pics for you, however I got quite a nasty cut 2 nights ago on my thumb from a table saw. I am afraid all my rebuildables are going to be as is for a couple weeks.
What was I building you may ask? A small stand to hold all my pv and attys. LOL!

Sent from the backwoods of Maine.

 

[Iowa Gal]

Ouch...that doesn't sound like fun. A picture would be very helpful...also please let me know the gauge wire and wraps. No rush as I'm heading to my moms anyhow. Thank so much..Iowa

Iowa Gal, I can take a pic of my set up after work tonight if it will help. I did a 1.5mm coil and used a piece of sugar and cream cotton yarn to wick. I would do a full rebuild with pics for you, however I got quite a nasty cut 2 nights ago on my thumb from a table saw. I am afraid all my rebuildables are going to be as is for a couple weeks.
What was I building you may ask? A small stand to hold all my pv and attys. LOL!

Sent from the backwoods of Maine.

 

[CaliJeff]

Please, find here:
FAQ - Mini ECIG

What atomizers can be used with the MicroStick?
We recommend the MiniGen, and believe it compliments it perfectly!
However, MicroStick accepts any 510 atomizer up to 16mm in diameter. This includes Hellfire Mini, Spheroid, Kayfun Mini, Sturm G-Tank, Nahual, Aspire Mini Nova, etc.
The bottom air fed tanks, cartos are also ok. The 510 connector is shorter than normal, so the atty is never fully screwed into it. There always be enough space between the connector and the bottom of the atty for the air flow.
Don't try to drill the MicroStick to increase the atomizer hole. This will ruin it.

You can add the DocDave MiniMicro to this list of atomizers. Very compact.

 

[chadsmo]

You can add the DocDave MiniMicro to this list of atomizers. Very compact.

From UKV.

Rebuildables:-
A7 (Post #111)
Animodz ChowChow (Post #106)
Animodz DoggyStyle (Post #106)
Arashi Mini V1 (Post #85)
Atmomixani Steam Machine Dripper
Bulli Smoker A2 (14mm?)
Chels MiniGen (14.5mm)
Docdave Mini-B (Post #106) (16mm)
Docdave Mini Micro (16mm)
GG Penelope (requires sanding, see Post #7) (17mm)
GP Spheroid (16mm)
Gurman V2
Gus Aiolos (16mm)
Hellfire Micro Mini (16mm)
Hellfire Mini (Post #12) (16mm)
Line LE (14mm)
Line SS (Post #12) (14mm)
MM Vapors Mini-DID (14mm)
MM Vapors Temon (16mm)
Nahaul (Post #12) (16mm)
Phoenix XL RDA (16mm)
Piculisci (14mm?)
Qzi Mini (16mm)
RGM2 (Post #105)
Ruthless Mods Havoc (Post #98) (16mm)
Sturm G-Tank (Post #12) (15mm)
Sofia/Diver(v2)/Killer + 45mm Slim Tank or Grail (Post #12)
SvoeMesto Kayfun Mini (Post #12) (14mm standard, 15mm Mak. tank)
Taifun V1/V2 with cotton tank
Witcher Cyclon v2 15mm (TBD - knurled base may be 17mm)

Extension compatible atties:-
510 extensions are in the works allowing atomisers to either sit elevated in the hole or atop the MicroStick. Max size for an atomiser on top is about 18mm. See here
Buds Worx ERA (15mm)
Buds Worx Hornet (13mm)
Chris Creations Fatty (15mm, 19mm top)
Crescent Moon Double Cross (17mm)
Madz Modz Reactor (16mm)
Mark T Infinity (12.9mm)
Prometey Gryphon (TBD 18mm)
Sturm Pandora (TBD 18mm)
Taifun GS (17mm)
Vicious Ant Cyclone (14.5mm)
Vicious Ant Cyclone AFC (18mm)
Vicious Ant Divo (TBD 14mm?)
Yellowkiss Arrow (17mm)

Tanks:-
Titanide
Boge F-16

Others:-
Aspire Mini Vivi Nova (Post #87)

Issues:-
MAGA - some may not fit