Mods by Chels - mini-ecig

[chadsmo]

My Ivogo Clone kayfun Mini v2.1 arrives tonight... so we shall see

I've vaped mine for a few minutes. Need to get back to it. I vape 30/70VG and the wicking so far has not been good. There is so little space between the tank and the chimney that it was making wicking very difficult. It seems a tiny bit better with the steel tank as opposed to the clear but I can't say for sure.

 

[fantellie]

No such plans yet, but I guess an SS version would be really heavy.

I suspect I would like it so much that I wouldn't mind the extra weight.

 

[Hondahawkrider]

Awesome thread... I'm starting to get exicited about getting mine....

I dropped the hammer back in May, and am awaiting mine... I have other mods, so I don't mind waiting. I know some don't like, to wait, but the testimonials, and what I have read here have set the bar for my expectations.

Pretty much all my mods are 18650, with standard atomizers for em (22mm I think). So I will need something for the MS. So I appreciate the reviews... I have ordered a kayfun mini from fasttech..

https://www.fasttech.com/p/1733900

went with it, because it looks like the top of the chimney comes off, so I can do my standard style build.

If I like it as much as I hope/expect it, I will probably see about the spheroid.

Really looking forward to getting a stealth mod, I can take to work, that's small and easy to carry with me all the time...

 

[NerdVap0r]

I suspect I would like it so much that I wouldn't mind the extra weight.

lol same my friend. cant be heavier than a reo mini ether im guessing which is already perfect.

 

[Zbeast08]

A little taller than I preferred but works!

Sent from my iPad using Tapatalk

 

[cecsystems]

A little taller than I preferred but works!

Sent from my iPad using Tapatalk

I got mine as well, but I haven't built it yet but I did see what it would look like and agreed! It's a little taller than I'd like as well... I really got used to the look of the Spheroid. How is the vape? I will make time to build mine tonight... Off for the rest of the week!!! Woo Hoo.

 

[want to quit]

Just put a shorty drip tip on the bad boy and it looks way smaller

 

[Zbeast08]

Just put a shorty drip tip on the bad boy and it looks way smaller

Done!!


Sent from my iPad using Tapatalk

 

[Zbeast08]

I got mine as well, but I haven't built it yet but I did see what it would look like and agreed! It's a little taller than I'd like as well... I really got used to the look of the Spheroid. How is the vape? I will make time to build mine tonight... Off for the rest of the week!!! Woo Hoo.

The Vape is very similar to the standard KFL. Vaped it all day and stayed in my front pocket with no leaks!! But......an hour or so ago,I was out in the front yard talking to a neighbor and he said you have something on your pants and I looked down and there was a spot about the size of a quarter and she had leaked!! It was fresh but low on juice probably the cause of the sudden leak after using it off and on all day! The other thing I noticed is that it continues to fire for a second or two after releasing the fire button which I haven't experienced before either. Oh well, it vapes great tho!


Sent from my iPad using Tapatalk

 

[Vermiform]

Just put a shorty drip tip on the bad boy and it looks way smaller

Done!!

Pics or it didn't happen.

 

[Gunnerdart]

Other than the Spheroid, what other atomizers are folks using on this? Genesis style isn't my thing. however it may be others so feel free to chime in with any and all

Kayfun mini v2.1 ( authentic )

It is discontinued now, but I see people are buying clones.. Not my thing but my opinion

Not to keen on the spheroid, have to fill it to often ... But compatible with the microstick thus the small juice capacity.




Sent from my iPhone using Tapatalk

 

[chebird]

A Microstick on the classied for 115 shipped... just saying, anyways no posts for 5 days? did everyone have that good of a fourth?

 

[215Z]

Does anyone know when the current batch will be shipped?
I ordered on April 27th and have not heard a peep.

 

[Vermiform]

Does anyone know when the current batch will be shipped?
I ordered on April 27th and have not heard a peep.

Here ya go.

Shipping of orders placed in April and May will be performed 10-15 of July.

 

[LittleDonkey]

The store is fully functional again and we get back to the normal speed of answering. Now again we try to answer all requests in 1 day.

We have some news from the production.
1. The bodies of the MicroSticks is nearly ready. Tomorrow they will pass the last operation before the anodising: cutting the windows in the atty hole. Then they will be sent for anodising. We expect them to be ready before 15/07. While they will be on anodising we'll complete the Hamorikos.

2. A new sandblasting machine arrived, so we will have full control over quality of the Hamorikos finish. Also it is used to prepare the MicroSticks for anodising. Currently we're working on the buttons for Hamorikos. Photos will be available a bit later.

3. The prototype of the MiniAtty is nearly ready, but we put all our efforts on the MicroSticks now. Anyway we promise to ship the orders as soon as they are ready at least partially. The remaining part of orders will be shipped later at our expense. If the EMS shipping was selected, then the remaining part will be shipped also with EMS.

4. The current run of the MicroSticks is nearly sold out. We have only 10 items left for sale. The sales of the next run will be started when we ship all existing orders and all orders for the retailers.

We have more delays and we apologize for that. Starting a new factory is a tricky thing. We didn't expect 1 month delay due to electricity issues. Now when the power is on, we faced new problems, which can be rather easily solved, but anyway they take time. For example, the air compressor heated the building to +55, which is obviously too high for anyone. We had to re-arrange the installation of the hardware, so now it's ok, but it took another week.

With our current knowledge, the shipping will be performed 20-25 of July.

Fresh photos from production:

 

[XJ-linux]

If someone placed an order in June, would that order be shipped out of the currently existing units (pictured above) that go out 20-25th of July or would a June order come out of the next run?
Thanks!

 

[thegreyghost]

Just ordered one tonight. I can't wait! I didn't order the MiniGen atty because I'm looking for something that can hold around 3mls of juice.

Any recommendations? I'm not into dripping. I usually have my hands full at work and can't stop to drip or refill every 5 minutes.

 

[Devilution2010]

If someone placed an order in June, would that order be shipped out of the currently existing units (pictured above) that go out 20-25th of July or would a June order come out of the next run?
Thanks!

From my understanding, all pre-orders on this run up until they're out of stock will ship around the same time.


Sent from my iPhone using Tapatalk

 

[Devilution2010]

Just ordered one tonight. I can't wait! I didn't order the MiniGen atty because I'm looking for something that can hold around 3mls of juice.

Any recommendations? I'm not into dripping. I usually have my hands full at work and can't stop to drip or refill every 5 minutes.

GP Spheroids work great with the microstick.....not to mention one of my go-to attys for many mods. Another very popular atty is the kayfun mini. The authentic mini's are no longer produced but from my understanding, there are quite a few decent clones on the market worth checking out.


Sent from my iPhone using Tapatalk

 

[LittleDonkey]

From my understanding, all pre-orders on this run up until they're out of stock will ship around the same time.

That's correct. But the last order is shipped last.