This is what I meant when said that you will get used to it.
I guess you will get used to stop locking it at 99% closed.
Mods by Chels - mini-ecig
- Thread starter LittleDonkey
- Start date
- th_trl_thread_readers 0
-
- Tags
- kayfun
- Status
I guess you will get used to stop locking it at 99% closed.
Time for news!
Let's start with several most common questions.
1. Will you make the atomizer hole in the MicroStick wider to fit 17 mm atties?
No, this is not planned. The wall between the atomizer hole and the button is very thin (< 1mm). To make a bigger atty hole, we will need to move the connector away from the button and then the dimensions of the MicroStick also have to be changed. This will lead to changes in the extender, conductor, etc. So we will not change the size of the atomizer hole in the coming runs.
2. Will you make the extenders for the MicroSticks of the first run?
No, sorry. Many improvements were made to the MicroStick since the first run to make it better. We reduced the tolerances for the body and the bottom cap and re-worked the connector. This allowed us to make the extender, which fits well and has no problems with connection. Making the extender for the first run will bring back and multiply the problems. So we decided that we will not make the extenders for the first run. It's logical that each next version becomes better.
3. How to adjust position of the atty air hole in the MicroStick?
The position of the airhole in the MiniGen is adjustable. You can find the instruction here:
MiniGen assembly - YouTube
So you can change the relative position of the wick and the airhole thus changing the taste.
The connector in the MicroStick is not adjustable.
You can find these and other answers here:
FAQ - Mini ECIG
The production was started several days ago, so now the results are already visible.
We have photos of Hamoriko and MicroStick bodies.
Let's start with several most common questions.
1. Will you make the atomizer hole in the MicroStick wider to fit 17 mm atties?
No, this is not planned. The wall between the atomizer hole and the button is very thin (< 1mm). To make a bigger atty hole, we will need to move the connector away from the button and then the dimensions of the MicroStick also have to be changed. This will lead to changes in the extender, conductor, etc. So we will not change the size of the atomizer hole in the coming runs.
2. Will you make the extenders for the MicroSticks of the first run?
No, sorry. Many improvements were made to the MicroStick since the first run to make it better. We reduced the tolerances for the body and the bottom cap and re-worked the connector. This allowed us to make the extender, which fits well and has no problems with connection. Making the extender for the first run will bring back and multiply the problems. So we decided that we will not make the extenders for the first run. It's logical that each next version becomes better.
3. How to adjust position of the atty air hole in the MicroStick?
The position of the airhole in the MiniGen is adjustable. You can find the instruction here:
MiniGen assembly - YouTube
So you can change the relative position of the wick and the airhole thus changing the taste.
The connector in the MicroStick is not adjustable.
You can find these and other answers here:
FAQ - Mini ECIG
The production was started several days ago, so now the results are already visible.
We have photos of Hamoriko and MicroStick bodies.
Is it possible to use a 510 to Ego adapter in the MiniStick? I'm thinking of using an EVOD or Mini T3 in mine, possibly a ProTank 2 as well.
Protank 2 is already a 510. I suppose you could use the adaptor, the issue with all of these would be when go to take it out...there's only one place to grab hold of, and you could be unscrewing it at the wrong place, causing a mess, or, a piece that you can't get to without disassembly.
Sent from my iPad
Think he may have been talking about Protank 2 mini, as the standard 2 is approx. 19mm so would not fit in the microstick regardless.
I agree I would be worried about it coming apart somewhere I wouldn't want it to.
Sent from the backwoods of Maine.
I agree I would be worried about it coming apart somewhere I wouldn't want it to.
Sent from the backwoods of Maine.
You're right...it must be the mini...didn't even think about it.
Sent from my iPad
It is no small feat to impress perseas, the maker of the GP line of products.
After a few days with a Microstick, I can see why. I accidentally built my Spheroid at 1.9 ohms, much too high for a mech mod. This tiny device, running on a mere 18350, is churning out amazing vapor and flavor at that resistance.
After a few days with a Microstick, I can see why. I accidentally built my Spheroid at 1.9 ohms, much too high for a mech mod. This tiny device, running on a mere 18350, is churning out amazing vapor and flavor at that resistance.
Couldn't agree more about Perseas...I run my Spheroid at 1.8ohms on my mechs...and I find the flavor better that anything else I've tried.
Sent from my iPad
Thanks for the replies Akdare and callmecletus, I was thinking of the ProTank mini, sorry for the confusion. Looks like I'll be delving into the world of RBA's after all. Hold me, I'm scared.
Get a Spheroid. Really easy to build, and IMHO the flavor cannot be beat. There are lots of folks here to help. I don't know about holding you, but we'll talk you through it!
Sent from my iPad
Sent from my iPad
YAY It made it! It's a Christmas miracle. No update on tracking ,but it's here. Awesomesauce.
One question though. What happened to the lanyard post?
Thanks.
One question though. What happened to the lanyard post?
Thanks.
Many leather cases are in stock, though still shipped directly from Russia:
In stock M01 Case for MicroStick - Parish leather cases
Also we have a couple of fresh photos of Hamoriko mods.
In stock M01 Case for MicroStick - Parish leather cases
Also we have a couple of fresh photos of Hamoriko mods.
It was removed in the second run. We heard many complains that it troubles button unlock. Also many people said that it's a nice pocket mod, so the lanyard pin is not needed.
So what tank are you using it with? I have a Sophia headed my way...
Slim Tank from SS 304 with 35mm and 45mm plexiglass tubes ~ by Leo. Pic is the 45mm Tube with Nail Drip Tip
Bill is offering 10% off, on all products till 01/07/2014 ~ discount code is XMAS1314
Last edited:
xtreme I forgot do you have a gp spheroid also? I should get my first Sophia tomorrow or Saturday so I'll give it a test drive and if I like it as much as others have said I would, might have to get a second and will order the tanks if I do. I've got a little money burning a hole in my pocket in my pp account and need to get pictures taken of a couple of other items to sell. With the tank it should work on my GP Piccolo also
- Status
Similar threads
- Locked
- Locked
- Locked
