Status
Not open for further replies.

OBF_Vapor

Super Member
ECF Veteran
Verified Member
why they gotta be so small. his is HUGE. of course its easier if its bigger Lol. i tried using a needle around the silica. i can probably try his screw method with a small thinner screw.

hillarious when he starts saying "screwing screwing screwing" lol

What are you wrapping coils for? Mine are all for genesis style atty's but if you are doing evod or kanger products its the same premiss. You could just use a needle, drill bit, or small screwdriver to wrap it around and then thread your silica, cotton, or whatever your using through it. I have gone almost exclusively to SS rope for my wicks and love it but that wont be for you if your rebuilding clearo's. I don't know if you are heating your wire before you wrap it but you may want to do that since it removes some of the springiness from it.

I know it sucks at first but I promise you will get the hang of it.
 

Miarose

Vaping Master
ECF Veteran
Verified Member
Jul 27, 2013
3,458
16,474
West Chester, PA
What are you wrapping coils for? Mine are all for genesis style atty's but if you are doing evod or kanger products its the same premiss. You could just use a needle, drill bit, or small screwdriver to wrap it around and then thread your silica, cotton, or whatever your using through it. I have gone almost exclusively to SS rope for my wicks and love it but that wont be for you if your rebuilding clearo's. I don't know if you are heating your wire before you wrap it but you may want to do that since it removes some of the springiness from it.

I know it sucks at first but I promise you will get the hang of it.

yeah just evods and protank coils. i didn't seem to have a problem with getting the wire around as much perse as the stupid silica like falling apart. it took me forever to put the stupid little rubber stopper back in, and when i did it apparently pulled the coil all bent down. i got mad and stopped lol
 

OBF_Vapor

Super Member
ECF Veteran
Verified Member
OK As many of you may be aware there is a lot of talk about pending FDA regulations that may or may not come to fruition. Phil has a pretty good and funny video up on his youtube that you should check out. I would post it here but it has NSFW language so I figured I would avoid the MOD's wrath and just give you a link. If you are not active in protecting our ability to vape I humbly ask that you take any funds that you may have and send them to CASAA, they are our voice right now and before the gov't get out of hand and bans them be really need to be loud and educate those that oppose.

Take a minute to do the survey

and then
enjoy and get active
 

kelli

Moved On
ECF Veteran
Feb 14, 2013
6,503
39,319
cocoon of lunacy
yeah just evods and protank coils. i didn't seem to have a problem with getting the wire around as much perse as the stupid silica like falling apart. it took me forever to put the stupid little rubber stopper back in, and when i did it apparently pulled the coil all bent down. i got mad and stopped lol

lol sounds so much like me. i get very frustrated and flabbergasted working on stuff, especially if it's small and delicate. i end up just saying "aww screw it anyway".
 

Miarose

Vaping Master
ECF Veteran
Verified Member
Jul 27, 2013
3,458
16,474
West Chester, PA
lol sounds so much like me. i get very frustrated and flabbergasted working on stuff, especially if it's small and delicate. i end up just saying "aww screw it anyway".

yup. that's what happened. now im like f-it. i don't wanna do this :(


on another note. mbv's cotton candy is pretty darn good. i got it in 18mg which is a bit higher than i normally vape so i could mix it in with some of my 6mgs, because they are just too weak. it's a little on the harsh side which i assume is from the 18mg. and i hate the clearo i put it in :(

oh and its making me feel lightheaded hahah. i just wanted to try it by itself first! LOL
 

CJ797

Full Member
Jul 9, 2013
58
47
Missouri
OK As many of you may be aware there is a lot of talk about pending FDA regulations that may or may not come to fruition. Phil has a pretty good and funny video up on his youtube that you should check out. I would post it here but it has NSFW language so I figured I would avoid the MOD's wrath and just give you a link. If you are not active in protecting our ability to vape I humbly ask that you take any funds that you may have and send them to CASAA, they are our voice right now and before the gov't get out of hand and bans them be really need to be loud and educate those that oppose.

Take a minute to do the survey

and then
enjoy and get active

Now that's funny
 

DustyZ

Suspended
Jul 5, 2013
2,896
18,391
Ocala, FL, USA
OK As many of you may be aware there is a lot of talk about pending FDA regulations that may or may not come to fruition. Phil has a pretty good and funny video up on his youtube that you should check out. I would post it here but it has NSFW language so I figured I would avoid the MOD's wrath and just give you a link. If you are not active in protecting our ability to vape I humbly ask that you take any funds that you may have and send them to CASAA, they are our voice right now and before the gov't get out of hand and bans them be really need to be loud and educate those that oppose.

Take a minute to do the survey

and then
enjoy and get active

That's the best video I have seen him do, I like all his vids though. I needed a good laugh and that was just awesome, the only term he missed was the "Revolutionary" word, that's a word I have some to hate. lol :laugh:
 

irwink

CASAA Member
ECF Veteran
Mar 16, 2010
1,195
1,249
Norfolk, Virginia, USA
The amount of flavoring for MBV DIY I see most often is 12.5% - MBV recommends 15% - 40%, but that's kind of a crazy range. I'd start somewhere between 10% and 15% and work my way up from there if I felt I needed more flavor.

Thanks for the replies OhahiKrikket and retired1. Good info.
 

Patkid

Vaping Master
ECF Veteran
Verified Member
Apr 15, 2013
3,349
22,010
78
Rockford, IL
I love love love my MBV Whipped Cream. I need this in a 55 gallon drum as it can fix any 'so-so' juice. But I hate to waste it for that!
So light and airy and the taste, for me, is spot on. I have to look up my invoice to see how I ordered this. I would like it with one more flavor shot, I think.
Kudos!, MVB!
Pat
 

Patkid

Vaping Master
ECF Veteran
Verified Member
Apr 15, 2013
3,349
22,010
78
Rockford, IL
I DID IT!!! I decided to try again and i rebuilt a protank head!! I used a toothpick instead of a screw. i was afraid it'd be too large of a coil, but i was able to slip my 3mm silica right in, and it tested at 2.3 ohms! I DID IT?!?!??! Lol im scared to even try to use it LOL

Girlllll!!! , you rock!
 

Unfettered

Super Member
ECF Veteran
Verified Member
Nov 5, 2009
715
2,083
Texas
OK As many of you may be aware there is a lot of talk about pending FDA regulations that may or may not come to fruition. Phil has a pretty good and funny video up on his youtube that you should check out. I would post it here but it has NSFW language so I figured I would avoid the MOD's wrath and just give you a link. If you are not active in protecting our ability to vape I humbly ask that you take any funds that you may have and send them to CASAA, they are our voice right now and before the gov't get out of hand and bans them be really need to be loud and educate those that oppose.

Take a minute to do the survey

and then
enjoy and get active

Omg....I laughed so hard. When he walks by behind the mower I lost it. Thanks for sharing. :laugh:

Vape mail came...and it wasn't juice!!!! "Say halooo to my new little friends......"
View attachment 244850

Ooooh, shiny new toys!! Enjoy! :)
 
Status
Not open for further replies.

Users who are viewing this thread