Is anyone using this or what ???? People this mod I made rocks ya gotta try it if ya havent, you will like it I think..!!!
mwa's 801 HV-Imeo/Atty Mod
- Thread starter mwa102464
- Start date
- th_trl_thread_readers 0
- Status
Heres pics everyone im sorry I posted this and moved it to the Gg thread but the pics must not have posted , here they are have fun with this it totaly ROCKS..!!!!!!
MWA102464
MWA102464
Everyone have fun with this, also try it without the blue foam ,, Im using a 50/50 PG-VG MIX juice and just enough juice falls through onto the bridge when the Atty heats and you turn it on,, it's really god you get about 2ML's of juice in the 801
MWA102464
MWA102464
As I have read this thread twice now, I think your mode requires removing the original "poly-fill", correct? So, since I use PG juice only, I assume I would NEED the "blue foam". Otherwise it would just run out, correct? I have never seen VG juice, it must be real thick stuff!
WHERE does one get "blue foam"?
I am willing to try anything, I have played with all four types for my GGTS.
First choice: Cartomizers, which I now refill with PG juice using condom method and run at 6 volts, great, least amount of work, longest vaping time without constant attention.
501, my 2nd choice, like any cartridge, needs often refilling, but seemingly less attention then the next two choices.
901, my 3rd choice, (I have both HV and regular attys).
801, my LAST choice but DREADED!, (I have both HV and regular attys). I have to just about OVERFILL the thing to get any juice flow and decent vaping. Then of course juice seems to collect on the outside of the white plastic casing while inside the atty, and some gets into the mouth piece at times, and can drip further into the GGTS case, had this happen once on total "overfill", overall very MESSY no matter what I do. If the 801 is not dripping wet at first, then it runs DRY much faster then all the other carts, even though it has the largest reserve. The standard, included, poly-fill just does NOT feed the atty well at all, seems like a horrible design, though not that different then all the others, which is odd.
I'll try anything to just be able to use the 801 when I like to switch and use all my new toys. Now I know why folks go to dripping, using an 801 cart is just as much work, if not more. I have dripped but still want to attempt to master what I can with carts. Until I get the Imeo AFS II, my first and easy choice is still using cartomizers and refilling them and burning at 6 volts.
Thanks!
havent tried with all pg, though for some reason the juice wont fall through the whole with VG when I turn it upside down, same might happen with PG I would give it a try..!! Harpo I thought you had this working on a 801 in a previous post I saw you wrote. I use the 801HV Atty with this and it works awesome for me though I use a 50/50 or 60/40 mixed juice. sometimes I put a small pice of foam in the bottom of the cart , real small just to tame the draw a bit, but the juice seems to drip fine when I turn on my Atty, the heat must thin it enough to make it drop out of the Grommet, ive been running this now for days and im getting 2ml's of liquid in each fill, the 801HV must/must be well primed and runs on a lot of juice anyway so I prime it really good first then fill my cart mod and roll like that..
Mactavish blue foam can be had at the local pet shops or the aquarium supply, it's used for fish filters, Harpo I don't get it this works best on the 801 what are you having a issue with maybe I can help ya out
- Status
Similar threads
