My brand new Ikv Dbox Pyrex PuriTank

[5cardstud]

I've got 2 on the way. Here's another link a lil cheaper. PuriTank Bottom Coil Glassomizer (PUTAGLAS)

NO Thanks. I've used other venders that "Were Cheaper" and in the long run they were more expensive. That and no one, Not Another Vendor has the customer support that Ikenvape has.
I know you were trying to be helpful but most of the people here have tried the other junk that's out there and have found if it isn't Ikenvape it isn't about anything. After you have been around this stuff a little longer you'll learn too.

 

[5cardstud]

looks like they raised the price.
i could have sworn they were like $13.49 when i first saw them on that site and figured the price diff was between an IKV version and the non-IKV version (or am i being naive? LOL)

No your not being naive. You get what you pay for. There are no shortcuts to the best there is. I've been using this one non stop since I got it and it works the exact same today as it did when I opened it. You can get cheaper fusions too but in the end you will pay more than for Ikenvapes because his last way longer than the cheapos. Oh and they perform better than the cheapos too.

 

[New2vaps]

I am a little confused. So are you saying the one Dragonfire sells is different than the one ikenvape sells?

 

[5cardstud]

I am a little confused. So are you saying the one Dragonfire sells is different than the one ikenvape sells?

It sure is. Anything Ikenvape puts his name on has been built to his specs. That's why it's called Ikv Dbox Pyrex PuriTank instead of Dbox Pyrex PuriTank.
Here is the description.

DBOX PuiTank Bottom Coil Glassomizer This is an IKV rendition of making the EVOD coils compatible for everyone that does not own an ego style device. This pyrex is made with class and will never dissolve your eliquid, even when stressed with high temperatures. We worked with DBOX Technologies to creat this masterpiece. This unit is built with Stainless Steel caps and high end pyrex glass. Slenderized cylinder to allow a higher capacity of e-liquid and is compatible with our wide range of Stainless Steel Driptips. Customize it your way!

 

[JJOOHHNN]

I am a little confused. So are you saying the one Dragonfire sells is different than the one ikenvape sells?

I don't like clearomizers. I like the ones Iken has messed with. I like his cartos better but I like these. Something is different about them for sure.

 

[New2vaps]

Oh wow, I didn't know there was a difference. In this case I want to buy it from Ikenvape. Problem is it's sold out. Anyone know when he will be getting them back in stock?

Also, 5cardstud, in the description it stated the tank was made for made for anyone who does not own an ego style device. Will it still work on my MVP and SPINNER?

Thanks

 

[aikanae1]

I'm waiting for stock too. Any hope of some soon?

 

[5cardstud]

Oh wow, I didn't know there was a difference. In this case I want to buy it from Ikenvape. Problem is it's sold out. Anyone know when he will be getting them back in stock?

Also, 5cardstud, in the description it stated the tank was made for made for anyone who does not own an ego style device. Will it still work on my MVP and SPINNER?

Thanks

Yes it should if they have 510 threads. I use mine on my Infinity Pro without problems. In fact it works great.

 

[Kaefo]

Has anyone had the glass detach from the bottom on theirs? Happened to one of the tanks I just received from IKV yesterday. Any suggestions on what to use to re-secure it?

 

[5cardstud]

Has anyone had the glass detach from the bottom on theirs? Happened to one of the tanks I just received from IKV yesterday. Any suggestions on what to use to re-secure it?

Yes I had one. He's in conference with them about that. I recommend you get ahold of Ikenvape and have it replaced. sales@ikenvape.com I'm going to re glue mine. If you do Just make sure you use a non toxic glue. I'm going to go get some tomorrow and I'll let you know what kind I use if you go that way.

Which one was it? The Dbox or the Protank?

 

[hottierockstar]

i'm waiting for a restocking wave so i can send mr/mrs ikenvape some cash money!

 

[Kaefo]

Yes I had one. He's in conference with them about that. I recommend you get ahold of Ikenvape and have it replaced. sales@ikenvape.com I'm going to re glue mine. If you do Just make sure you use a non toxic glue. I'm going to go get some tomorrow and I'll let you know what kind I use if you go that way.

Which one was it? The Dbox or the Protank?

It was the Dbox. I will email him and also wait to hear what you use. Thanks alot!

 

[5cardstud]

It was the Dbox. I will email him and also wait to hear what you use. Thanks alot!

They will take care of you. Their Customer Service is great.

 

[Iken]

Has anyone had the glass detach from the bottom on theirs? Happened to one of the tanks I just received from IKV yesterday. Any suggestions on what to use to re-secure it?

Hi Kaefo,
No worries there is a 2 month warranty on these. I came across the same thing with one as did 2 other customers. The problem lies in a only a couple of them thankfully. And this factory is making good on our work and will cover it.
At the last minute we increased the thickness of the glass to 3.5mm for extra durability so the caps needed to be enlarged. Again last minute..I should have known better and it was a silly mistake. We will take care of it. I have a shipment coming in where the issue is taken care of and will get one out to you the very moment they arrive. Just shoot us an email so we know who you are.

 

[Kaefo]

Thanks so much! I am very happy with these. Got 4...only one had that issue. I would (and have) recommend them.

Sent from my HTC VLE_U using Tapatalk 2

 

[5cardstud]

For those who care I fixed mine with Duco Cement and it held nicely. Oh and I'm glad Iken made them thicker because while fixing it it rolled off the bench onto a cement floor. Came out without a scratch. I'm going to let this cement cure for 24 hr. before trying it. They said 17 but I want it dry. It's supposed to be food safe after it dries. I want to see how the juice affects it. It also says dishwasher safe.

 

[hottierockstar]

now i am stalking this tank....i have notifications set up everywhere possible (i think LOL)

 

[JJOOHHNN]

now i am stalking this tank....i have notifications set up everywhere possible (i think LOL)

You are a stalker....

 

[Iken]

Thanks so much! I am very happy with these. Got 4...only one had that issue. I would (and have) recommend them.

Sent from my HTC VLE_U using Tapatalk 2

That is such Great news! Thank goodness it was only the one! Out of the whole batch, I believe it was only 4 to have the problem and they seemed instantaneous upon using. As I said before, the problem is remedied and you are on a personal note. You will be the first to know the second we get them via tracking number. Thank you!

For those who care I fixed mine with Duco Cement and it held nicely. Oh and I'm glad Iken made them thicker because while fixing it it rolled off the bench onto a cement floor. Came out without a scratch. I'm going to let this cement cure for 24 hr. before trying it. They said 17 but I want it dry. It's supposed to be food safe after it dries. I want to see how the juice affects it. It also says dishwasher safe.

Ooooh Very cool J5! That was clever thinking! Please let us know how it's working out.

now i am stalking this tank....i have notifications set up everywhere possible (i think LOL)

You only need one place and thats the email instock notification button thats right underneath the Add to Registry feature. I had a customer who was having a compatibility issue with his Vamo (it's always the vamo that gives me problems ) so I sent him off my base to troubleshoot so I'm stalking right along with you
Love your Pit! She? reminds me of a good friends doggie Ducatti.

 

[5cardstud]

So far, So good. No leaks, no runs, no errors. It vapes like a freight train.

I woke up at 3AM and though to check this to see what's going on. It was the same as last time. It didn't dissolve the glue but instead worked its way between the glue and the glass. So this method is a NO GO.

It did great while it lasted.