My First 5v Mod

Status
Not open for further replies.

jamie70

Full Member
Mar 16, 2011
27
1
55
ontario
This mod is inspired by The Puck. It is also a juice box. With 4AAA nimh batteries all contained in a single 4AA battery box from Radio Shack (the Source). Here are the pics:

IMG_0196.JPGIMG_0198.JPGIMG_0197.JPGIMG_0199.JPGIMG_0201.JPG

more pics.....
 

jamie70

Full Member
Mar 16, 2011
27
1
55
ontario
....here:

IMG_0203.JPG


IMG_0200.JPG


IMG_0204.JPG



The single 4AA box is slim, but a little wider than the Puck. But I was happy to get everything down to one box and get a 3ml juice bottle inside as well.

The box has it's original switch as a kill switch, and a momentary switch installed for vaping. I used a 4xx E2 carto connector as a 510 battery connector (same threads-reverse function).
The tube on the e2 goes into the 3ml bottle directly through a modified dropper tip. A syringe tube drops in from the connector to the bottom of the bottle. This tube can be removed and a separate syringe used to refill from outside the box without removing the bottle - or bottles can be switched out.

I like stealth mode, but you could probably fit an led and resistor in the chaseway between the switches if you wanted to.

This box is streamlined a little without external tubes from a pump - just a cutout on the back for direct pressing the bottle with your thumb.

Thanks for looking.
 
Status
Not open for further replies.

Users who are viewing this thread