My Nemesis Clone Story.

[wedoitall]

Famous last words...

That's what I said too until I hooked my igo w with a .7 ohm dual micro coil on my nemmy.

 

[Bubba]

i thought the line was, "I'll be right back"

Only in horror movies

 

[cantstopwontstop]

Good choice man Ill be honest you'll probably be happier with that nemesis that with any other clone on the market. I haven't fount another clone that i like anywhere near as much. The only other mod I own that I like better cost me a ... load of money haha. The best things you can do you've already done (good batteries/ charger) the only other thing I did to mine that made it any better was polish the contacts and put in a couple magnets. I'm thinking about buying a second nemesis now.

 

[wedoitall]

No thread or video that I know of.

Coke can shims under magnet to make switch actuation any desired firmness.

Bottom vent will likely be blocked from swollen batt. Batt more likely to top vent. Any small vent hole could plug w/ debris. If you want to overkill safety then choose mod w/ massive vent holes in tube. Chance of batt vent is slim if choose good batt.

If your nemmy works to your liking then vape on

Where did you get the bolts? Have you measured the voltage drop difference? I really like your mods will have to try them out on mine

 

[ckquatt]

I just pulled a Nemesis clone of eBay for a song a little while ago!! Can't wait for it to show up! It's the 2 tone one, I really like the way it looks! Now I have something for my KFL and Pulse-G to sit on!

I have no interest in sub-ohming, I just bought it to have a mech mod on hand. I'm perfectly happy with a cottoned 1.5 - 1.7 ohm coil on whatever topper I'm using at the moment.

 

[emus]

Where did you get the bolts? Have you measured the voltage drop difference? I really like your mods will have to try them out on mine

I got those SS bolts from Ace and got some more at local bolt store. I cut, ground and polished. I compared voltage drop to "silver plated" 3 times. Very close down to 0.5 ohms. Didn't test below 0.5 ohms.

Couldn't find M5 copper bolts locally. Not sure who has copper M5 bolts or threaded rod?

 

[wedoitall]

What the typical voltage drop on mechs? Right now I have .15 on my Nemmy. That seemed kinda high


Sent from my iPhone using Tapatalk

 

[emus]

What the typical voltage drop on mechs? Right now I have .15 on my Nemmy. That seemed kinda high


Sent from my iPhone using Tapatalk

Voltage drop is a function of mod, batt, topper, coil ohms, test protocol, etc.

Voltage drop increases as coil ohms drop.

 

[bsoplinger]

My nemesis upgrades:

Polished machine marks off switch post.
Made a few different length firing pins from M5-0.8 bolts.
Deal extreme magnets.
Flattened lock washer switch throw shim.
Coke can magnet shims.
Anti-spin pin delete.
Stealth top vent hole drilled.

I just got my first pair of Nemesiseseses, Nemesii, what exactly is the plural? And the 3D dripper clone and some colored tubes. Cleaned everything and I've got things working but the adjustments required had me coming here for answers and a search turned up this thread. I have some questions...

The smaller silver washer looking things with the black marker, those are the magnets? And the marks, polarity so you know how to orient them when you put it together? What is the purpose of: The pieces of flattened Coke can washers? The lock washer? Why remove the rice pin? Doesn't that help conduct electricity? I can understand having different length pins for the cap end but why for the switch end?

Sent from my Nexus 7 using Xparent Purple Tapatalk 2

 

[Completely Average]

The kfl+ would be more of dream.. I would be more capable of affording a clone right now, and I can't find them. When I do see them in Stock the price hurts... some day maybe *sigh*

EBAY!!!!!!

Seriously. You can get KFL+ and Kayfun 3.1 ES for about $35-$40 at Ebay. About the same price as an Aspire Nautilus.

 

[k702]

EBAY!!!!!!

Seriously. You can get KFL+ and Kayfun 3.1 ES for about $35-$40 at Ebay. About the same price as an Aspire Nautilus.

I've heard so many talk about being careful about ebay with vaping supplies though... but that's a hell of a price. That for the fasttech clones?

 

[grobbins]

Best mech mod i have owned to date is my stingray clone from fasttech. Pretty much a redesign on the nemesis style switch but man is it ever a nice mod. Silver plated contacts with a magnetic switch(find the switch throw and magnet strength perfect imo) and a beautiful finish on the brushed brass version i picked up.


*edit* the feeling of awesomeness will probably subside a bit once I finally get my batch of DNA30 chips in and start building my own mods lol

 

[Completely Average]

I've heard so many talk about being careful about ebay with vaping supplies though... but that's a hell of a price. That for the fasttech clones?

No, I got an Hcigar Kayfun 3.1 for $35 last week.


Look for the sellers with the "Buy it Now" price. Click on their link and look in the top-right corner to see the sellers stats. If they've had more than 1,000 feedback and have more than a 97% favorable rate, you can pretty much bet that they are reliable. I haven't had a single problem with any of the purchases I've made.

 

[k702]

No, I got an Hcigar Kayfun 3.1 for $35 last week.


Look for the sellers with the "Buy it Now" price. Click on their link and look in the top-right corner to see the sellers stats. If they've had more than 1,000 feedback and have more than a 97% favorable rate, you can pretty much bet that they are reliable. I haven't had a single problem with any of the purchases I've made.

thank you. I was going to wait for a month or two to grab a kayfun clone, but I see one right now that I can afford to get next week, even with picking up some more flavoring for my diy.