I'm thinking, give it a month or so and you will have several to choose from. And another month or two after that the Chinese will have them at half the price. It's just a matter of time at this point
- Status
I'm thinking, give it a month or so and you will have several to choose from. And another month or two after that the Chinese will have them at half the price. It's just a matter of time at this point
thats good to know about the battery and I think I am hooking it up right. I have + - running from battery leads to the button and + - running from the button to the atty. Does that sound right, or am I missing/doing something wrong?
I'm thinking, give it a month or so and you will have several to choose from. And another month or two after that the Chinese will have them at half the price. It's just a matter of time at this point
Well I wanna get my own built before they do that. Im not much of a tinker man but by god this is fun and Im lost with the electrical part but Im learning as I go.
Don't let the electrical part scare you Jambone. It's the most basic electrical circuit you can get (literally).
On day one of any electronics training, the very first circuit that is looked at is a DC power source (battery) wired through resistor (atty). The next thing that is usually introduced is a switch in the circuit.
Adding an LED makes things a tiny bit more complicated (but not really). I'm not sure what the point of an led even is in PV mods other than to make it a little more 'blingy'.
When it comes to electronics, it doesn't get any easier than PV's
On day one of any electronics training, the very first circuit that is looked at is a DC power source (battery) wired through resistor (atty). The next thing that is usually introduced is a switch in the circuit.
Adding an LED makes things a tiny bit more complicated (but not really). I'm not sure what the point of an led even is in PV mods other than to make it a little more 'blingy'.
When it comes to electronics, it doesn't get any easier than PV's
hmm think i may try to make one of these, but i am also a noob at electrical stuff. but damn all these great mads look like allot of fun and i wanna try!
could anyone share some links where i can buy the parts for this
like the box (prefer in black rather then clear
and the atty connector (ermm assuming the atty is removable/replaceable right?) and any other electronic bits, ohh and the battery. and epoxy
live in a rather small town so all i have around here is a wal mart, and a few not very well stocked harware stores, no real hobby shop near by :-(
Time for me to stop watching all of you have all the fun!! hehe
could anyone share some links where i can buy the parts for this
like the box (prefer in black rather then clear
and the atty connector (ermm assuming the atty is removable/replaceable right?) and any other electronic bits, ohh and the battery. and epoxy
live in a rather small town so all i have around here is a wal mart, and a few not very well stocked harware stores, no real hobby shop near by :-(
Time for me to stop watching all of you have all the fun!! hehe
Madvapes has most everything you'll need! They also have quick shipping and excellent customer service. While there, check out their how to instructions!
wow madvapes has allot more boxes then they did a few days ago when i checked it out, allot with master on/off built in thats cool, though since this uses a simple mechanical switch that would not be needed correct? so the
"2 x AA Battery Box with no switch" would work for this mod then?
and what bottle is being used? (only have some 10ml bottles on hand still kinda new to this so need to order some bottles)
Sorry for all the noob questions :-( just want to do this right the first time, dont have allot of money to blow screwing this up lol
in the pic of the bottle with epoxy on the top with the copper bands, the thing at the top is the juice cup you where talking about? whats that made from?
in the pic of the bottle with epoxy on the top with the copper bands, the thing at the top is the juice cup you where talking about? whats that made from?
A 14500 battery is slightly larger than an AA. A 3ml bottle is roughly the same diameter as a 14500 battery and a couple mm's shorter.
Hope that helps.
ahh simple enough, dont have any cartos... but i think my neighbor does ^_^ TY for the help
ok been reading some guides and how tos, think I understand this all now, pretty simple really just need to gather the supplies and tools i will need.
a few more questions though.
HP said that was a 6ml bottle I believe so still looking for the right bottle.
what size of copper pipe is used to make the rings around the epoxy on top of the bottle?
what excatly is that epoxy putty called? or a link would be great, a google brought up all sorts of epoxy puttys rofl.
hmm and seems the connectors I want at madvapes (the smaller ones) are out of stock doh!
a few more questions though.
HP said that was a 6ml bottle I believe so still looking for the right bottle.
what size of copper pipe is used to make the rings around the epoxy on top of the bottle?
what excatly is that epoxy putty called? or a link would be great, a google brought up all sorts of epoxy puttys rofl.
hmm and seems the connectors I want at madvapes (the smaller ones) are out of stock doh!
this is still really basic as most first mods tend to be. I have yet to put a bottle inside the box, Im waiting for those to get in the mail and I chose to try out the atomizer pump bottle. I got the box from radio shack, 4x AA box, so I went with the 14500(900mah) battery. like I said its a work in progress...
Attachments
Nice work highping! Makes me want to try harder! I'm still messing around with box mod. But wow, you do nice work! Thanks for sharing! marya
nicely done Jambone, working on gathering the parts for my first try. i was surprized that a local store here had many of the things i need like 1/16 copper tube for bottom feading, along with copper sheets and even copper foil! nice surprize.
Still trying to figure out where to get the 6ml bottles HP uses on this, any help?
also Highping how do you go about connecting the different pieces of copper inside the box? can that be done with solder? (sorry if its a stupid question, imma soldering noob)
Still trying to figure out where to get the 6ml bottles HP uses on this, any help?
also Highping how do you go about connecting the different pieces of copper inside the box? can that be done with solder? (sorry if its a stupid question, imma soldering noob)
well looked around a bit after i realized the madvapes 2xaa box would not hold a 18650 batt shown in the pics and found the same boxes Highping uses in the picks, seem like great little boxes, perfect size for the bat and bottle and hinged as well no screws to mess with. and pretty cheep at 1.75 each (1.50 each with 3 or more ect ect)
bleh cant post links, batteryjunction ultrafire battery case.
sadly it appears the company had a fire in there warehouse and new orders are blocked for who knows how long :-(
now the bottles..
bleh cant post links, batteryjunction ultrafire battery case.
sadly it appears the company had a fire in there warehouse and new orders are blocked for who knows how long :-(
now the bottles..
ty, it was a lot easier then i thought it was going to be, with me not having much knowledge of electrical work. Yeah i liked the extra space in it and decided to use the space under the atty for storage space to carry an extra atty. pics are on page 2 that show the atty holder.
http://www.e-cigarette-forum.com/forum/modders-forum/76810-my-first-510-juicebox-attempt.html
Kirothak, thank you, Im didnt use the same size or kind of bottle as highping, I chose to go with the atomizer spray bottle sense it was less soldering. Im still waiting on my bottle to get here, so I still have to fill the carts.
Over all though it vaps really well.Jambone
- Status
Similar threads
