Need Help Identifing Which Adapter I Need!

[ImJustAvg]

I have purchased three atty ohm testers over the years and all of them came with the right connector to screw in the atty/coil for the Kanger bottom tank that I rebuild. I just received a DROK rechargeable circular that doesn't have that same connector. SO now I will need to first identify the connector on the DROK circular and then identify what connector I need to adapt it too.

The first photo (circular) I need to identify the connector on the left side. The second photo have the correct connector on the right side.

I know! I should have checked out what I was buying before ordering, but I didn't!

 

[roxynoodle]

They aren't normal 510 connectors?

Is your Kanger tank ego threaded? If so, you need an ego to 510 adaptor. If you need one, PM me. I have some that came with isticks, and I don't need them.

 

[folkphys]

Yeah. The second picture shows an "Ego" threaded connector and the 1st picture shows a 510 connector. I can only assume we're talking about an atty that is Ego threaded and thus you will need a 510(male) to Ego(female) adapter like this.

 

[roxynoodle]

Oh, you're right, that second one doesn't have 510 threads. I just blew up the picture. I've never seen an ego threaded ohm meter.

The ones I have are 510 (male) to ego (male I guess as it would go on the inside).

Actually, let me get one and see if it would work. I've never actually looked at them.

 

[roxynoodle]

Mine are exactly like the pic folkphys linked, but that wouldn't work. The ego end would have to male to screw into the meter and the 510 end would have to be female to screw the atty into. That's if the threads on the meter are on the inside, and I can't tell on the pic.

 

[roxynoodle]

Ok, the ones I have will work if that meter has threading on the inside of the connector.