Need Help W/New Gus22 and GusTele

[badinfluence357]

Hi ECF and Friends,
Today I'm asking the community and calling all modders for help. I have a brand new Gus22 and Gus Tele that I want to mod because I want a brass post rather then the spring and screw post that it comes with.....where can I get a brass positive post like the EA mod or the chi you mod. I want to install that type of post on my gus mods.... sos sos sos calling all modders....lol


Sent from my SCH-R910 using Tapatalk 2

 

[badinfluence357]

View attachment 164011
Mods plus threaded positive brass post equals more connectivity... somebody Help me!!!!...lol

Sent from my SCH-R910 using Tapatalk 2

 

[badinfluence357]

No I didn't even realize I was posting to the classifieds I'm actually looking to buy brass post for my mods.

Sent from my SCH-R910 using Tapatalk 2

 

[Keegan1014]

My bad, you need a Lowes and a 10/32 brass screw's.

if you really love America your gonna have to love moonshine.
Phil Robertson for President.

 

[Keegan1014]

if you really love America your gonna have to love moonshine.
Phil Robertson for President.

 

[Caridwen]

Moved to modding forum.

 

[badinfluence357]

got it thank you so much found some old brass screws in the tool bag....
View attachment 164664
Sent from my SCH-R910 using Tapatalk 2

 

[badinfluence357]

all I need now is for katarina from atmomixiani to send me a brass button and a fastener to mod the switch and this thing will be rocking!!
View attachment 164665
The next step will be to install the button from a gus22 switch on the gus tele switch for better conductivity.....the screw alone increased conductivity with minimal power lost but with the guss22 switch it hits perfectly..
I don't understand why gus changed the button on the switch for the gus tele , all he had to do was keep the button, add the knurling on the lock ring and chrome the bottom of the switch or keep it bronze with out the guss logo on the botton... the gus 22 switch makes better contact and provides better conductivity, hardly any power loss with the screw in place of the spring as a positive pole.
These lil gus mods are amaizing, there built solid, look great with a number of attys and feel good in the hand. They just need a lil adjusting......


Sent from my SCH-R910 using Tapatalk 2

 

[studiovap]

View attachment 164011
Mods plus threaded positive brass post equals more connectivity... somebody Help me!!!!...lol

Sent from my SCH-R910 using Tapatalk 2

Just done this with my Paps will post pics , as soon as i take them

 

[studiovap]

Paps Voltage drop solved.
I was only getting 3.2v under load with a freshly charged (4.2v) IMR.
This loss was finally tracked to the puny hotspring.
I inserted some Brass bar from my local hobby shop into a battery drill and spun it up to machine it to fit into the spring sleeve in the Paps. I use a file for the first stage and then with 250grit sandpaper then 1200grit to finish before polishing.
The 18350and 18500 batteries required slightly different length posts, so I made one for each.
I used a very short cut section (about two turns ) of the original hotspring to create some give/spring when tightening the endcaps of the Paps.
I am aware of the risk of not having a hotsping in line and only run this with genesis setup the are rock solid, and only ever with IMR safe chemistry batteries, I still reinstall an original hotspring when setting up new coils and if I am in ANY doubt of the stability of my setup then again, I use the standard hotspring.
Result: I now get 3.85-3.9v under load with a 0.7 Ohm coil.
I am happy, but ever vigilant due to the lack of the safety the hotsping provided.

 

[badinfluence357]

Paps Voltage drop solved.
I was only getting 3.2v under load with a freshly charged (4.2v) IMR.
This loss was finally tracked to the puny hotspring.
I inserted some Brass bar from my local hobby shop into a battery drill and spun it up to machine it to fit into the spring sleeve in the Paps. I use a file for the first stage and then with 250grit sandpaper then 1200grit to finish before polishing.
The 18350and 18500 batteries required slightly different length posts, so I made one for each.
I used a very short cut section (about two turns ) of the original hotspring to create some give/spring when tightening the endcaps of the Paps.
I am aware of the risk of not having a hotsping in line and only run this with genesis setup the are rock solid, and only ever with IMR safe chemistry batteries, I still reinstall an original hotspring when setting up new coils and if I am in ANY doubt of the stability of my setup then again, I use the standard hotspring.
Result: I now get 3.85-3.9v under load with a 0.7 Ohm coil.
I am happy, but ever vigilant due to the lack of the safety the hotsping provided.

Nice work!!! Looks good, can you thread one of these like a screw.....

Sent from my SCH-R910 using Tapatalk 2

 

[studiovap]

Nice work!!! Looks good, can you thread one of these like a screw.....

Sent from my SCH-R910 using Tapatalk 2

Thanks, I don's see why not if you have the right die and cut the thread after machining the rod to the right pre threading size, then cut it to length.

 

[badinfluence357]

Sent from my SCH-R910 using Tapatalk 2

 

[badinfluence357]

Ok guys I updated and upgraded my gus tele thanks to the man himself Gus...I love his custom work and the customer service provided from Katarina at Amomixani.gr...Gus and Atmomixani have been taking our feedback and creating some of the best Mods in the business..now let me show you my upgraded Gus tele....
View attachment 169683View attachment 169684View attachment 169686View attachment 169687
All the brass upgrades I wanted have been created and installed on my Gus tele.... brass positive adjustible pole and brass button on switch with spiked pole on the inside for better contact....now it rocks!!!

 

[badinfluence357]

Thank you so much Gus and Atmomixani for making this modification possible....your friend to the end Badinfluence357!

Sent from my SCH-R910 using Tapatalk 2

 

[badinfluence357]

Tommorrow I will post pictures of the old switch and the new switch side by side to show the upgrades...I'm loving it!!!

Sent from my SCH-R910 using Tapatalk 2

 

[badinfluence357]

Here is the switch with the brass upgrade
View attachment 169821View attachment 169822View attachment 169823View attachment 169824

Sent from my SCH-R910 using Tapatalk 2

 

[badinfluence357]

I really like the thicker lockring and the spiked brass contact pole on the switch...it just looks so amazing and works excellent....
View attachment 170087

Sent from my SCH-R910 using Tapatalk 2

 

[badinfluence357]

Guss 22 18350 with Hellfire mini
This setup is by far the smallest mod I've vaped on. its tini for stealth vaping but hits f-king hard..
View attachment 171551

Sent from my SCH-R910 using Tapatalk 2

 

[iambalta]

what is the height and diameter of the braes tube yub

Sent from my GT-N7100 using Tapatalk 2