Thank you I ordered two sets yesterday and they were immediately shipped and on there way to me!
- Status
Thank you I ordered two sets yesterday and they were immediately shipped and on there way to me!
Hello all,
I have 2 of the Chemesis got both off ebay and can tell you there is a huge difference. one came in white box and was listed as hcigar second one came in brown box that says nemesis. none of the tubes will fit the other. The first one is way bigger id than the second one.
Both work real good but there is a difference! If i post the id measurements can someone measure theirs so I know which one is right? Thanks in advance!!
I have 2 of the Chemesis got both off ebay and can tell you there is a huge difference. one came in white box and was listed as hcigar second one came in brown box that says nemesis. none of the tubes will fit the other. The first one is way bigger id than the second one.
Both work real good but there is a difference! If i post the id measurements can someone measure theirs so I know which one is right? Thanks in advance!!
Not saying yours aren't different or whatever, but my VW clone came in a small plain white box and my brass came in a brown gift box that say's Nemesis. Both are definitely hcigar (I got them from BBV) and all the tubes and parts interchange. Yours may very well be different, but the box isn't necessarily any indicator. The fact that the parts don't match up though, would be. Sorry for you, I love my 2 tones!
Interesting! My Fastech SS version came in a small black box, little white sticker on the top reads "Nemesis mod" and white lettering on the front of the box that simply says "MOD".
It's sounding like there are several versions floating around out there!
It's sounding like there are several versions floating around out there!
Hcigar, Tobbeco and the FT-'no one knows who made it' versions. Well, those are the versions that I know of 
Sent from my iPhone
Sent from my iPhone
The issue is not in who sells it but who is working the Machines building it. The person that pays attention to tolerances and variances will produce a much more accurate part than the clown on the next machine wondering how long to quitting time.
ETA: I have been so impressed by the FT SS Clone the past 2 weeks in use, I have ordered a Brass Version and another SS version.
Fingers Crossed for Decent units to arrive.
ETA: I have been so impressed by the FT SS Clone the past 2 weeks in use, I have ordered a Brass Version and another SS version.
Fingers Crossed for Decent units to arrive.
Last edited:
The issue is not in who sells it but who is working the Machines building it. The person that pays attention to tolerances and variances will produce a much more accurate part than the clown on the next machine wondering how long to quitting time.
ETA: I have been so impressed by the FT SS Clone the past 2 weeks in use, I have ordered a Brass Version and another SS version.
Fingers Crossed for Decent units to arrive.
I think you have the correct answer.. I have a good idea they are all made in the same shop and sold by different people!
Loving this more than my provari with Russian 91% lately.
FT Nemesis clone
Atomic RDA
Kick 2
Magnetic switch
18350
Im not one for clones but I agree the Nemmy clone easily defecates on any Provari. Provari's are way overhyped imo.
I find it hard to compare the two since they are so different (mechanical vs APV). I love both. I always use my Provari when I build my atomizers that often find their way on my Chemesis.
I love my provari, currently my genuine nemmy and ft clone are on their way. I've vaped and messed with mechs a bit, but never owned one. The only reason I'm even getting a mech mod is to widen the spectrum of coils I can build. Provari significantly limits what you can do with rebuildable attys. I want to be able to build whatever I want, and so long as the build is decent, be able to vape it and not have some safety limit me. The provari is rugged and durable. I'm a marine and go to the field all the time, and always take my provari. And I wi continue to take that with me even once my mechs arrive. They are two different devices, with different pros and cons. But I like them both. Personal opinion here
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
I have two by Hcigar and the parts should be interchangeable even the brass ones. If not then they pulled a switch, this is the box.
Whats up fellow friends. I apologize if this has already been answered. But I have a Nemmi clone from HCigar, love this thing, however the issue Im having lately is the bottom switch. Now when I unscrew the bottom pin to ensure it make contact with the battery, there is so little room for play as far as it almost falling off the threads and becoming unscrewed completely. So much so that after vaping on it for a while it will eventually unscrew completely from the switch, and thus SURPRISE! Springs and that little brass pin end up spilling all over the floor.
Is there a fix for this? maybe a longer pin I can purchase? (and yes, I have removed my kick ring)
Is there a fix for this? maybe a longer pin I can purchase? (and yes, I have removed my kick ring)
what bats are you using? they must be really short I haven't had any issues like that, just the other way around that my button 18350 make my switch stick out a little maybe you could get a spacer of some sort
they do sell longer pins I just don't know where, somebody will soon chime in
Don't unscrew the bottom pin in the switch - you are supposed to tighten that down. The battery is supposed to sit on the Delrin insulator and the screwed down bottom pin will touch the battery when the switch is depressed. Simply adjust your top pin to meet your atmomizer's 510 center pin and then tighten up the switch so there is no battery rattle. This is how the Nemesis is supposed to work. Please let me know if this does not work for you and why. If the throw is too short and the mod won't fire, add the Kick ring.
So I picked up the Nemmi clone to learn how to build a mod. I got the Kayfun Lite clone RBA. I'm new to vaping in general and have only been doing it about a month and have learned a lot so far but looking for more info on what I'll need to get this running...
Can you guys hook me up with the the best places and types of the following to buy:
- Batteries
- Charger
- Ohm meter
- Anything else I'll need to start playing
Can you guys hook me up with the the best places and types of the following to buy:
- Batteries
- Charger
- Ohm meter
- Anything else I'll need to start playing
Last edited:
Firestorm thanks so much, I will take a look at this again when I get my mod after work. I will let you know. I think though it sounds like I've done this what you have mentioned, but when the switch is compressed I get nothing, no contact. So I have to unscrew it until I get contact... then the spill will happen shortly after. I'll take a look though, maybe I just need to play with the placement some more.
Have you removed the beauty ring? Not the extension that's used for 18500, 18350 + Kick, and Kick with an 18650, but the small, shiny ring that is usually shipped with it under the cap?
- Status
Similar threads
- Locked
