New From Super-T: The Precise Simplicity 18350 and 18500!

[raqball]

Hellfire (good luck )

I tried to score a Hellfire dripper forever.. No luck!

 

[tfarol]

Hey David,
I recently dropped my Precise Simplicity 18490. Now the Button doesnt slide in and out smoothly, it even gets stuck on and ihave ti pull it out. I came to the conclusion that it is the locking ring that is not a perfect circle anymore. I sent you an email asking if you had replacements? Just checking if you got that email. Thanks.

 

[MikeE3]

Any idea when the Simplicity line might be available again? Or is the priority just completing the ELA's and getting the new Strata to market?

 

[txredxj]

Got a little carried away cleaning up scratches

 

[raqball]

Hey David,

Any ballpark on when the 18350's will be back on the shelves?

Thank you sir!

 

[simon28]

Any chance the ti simplicty 18350 will be available again?

My brother used to be a distributor of SuperT products. Not sure why they are not getting anymore SuperT stuff

Was hoping to get the Ela and Simplicity from them.

 

[rumthin]

I'd also love to know when the 18350 simplicity will be available again.

 

[anavidfan]

If any one needs a black velvet bag for their Simplicity let me know. I have an extra one .
I put this up originally in the 18650, but made a mistake, I dont think its long enough for other than 350 or 500.

 

[DSPIVEY]

When are there going to be more of these?

 

[ARCHMAN]

Man, this thread made me order a PS 18350 for my incoming Sophia! Only thing is I was planning on using it on a Zen2 18350 w 510 adaptor so I ordered a 22mm IBTanked. Geez. Now I'm gonna have to order a 19mm IBTanked. It sure is difficult to remain pleased with all these groovy gizmos available. It is the overall size/weight, talk of outstanding machined threads, ribbed/textured tube, switch quality/tweak ability, locking ring, ect. $120 is spendy for half a flashlight, even if it is made in the USA, but the design really speaks to me! Looking forward to it!

 

[vaptamist]

Honestly, in this day and age when mechanical mods are all the rage, $120 is cheap. And for that $120 you'll get a nicer PV, with a lifetime warranty, over just about anything else out there.

 

[MikeE3]

Honestly, in this day and age when mechanical mods are all the rage, $120 is cheap. And for that $120 you'll get a nicer PV, with a lifetime warranty, over just about anything else out there.

IMHO - you're spot on with that statement. I'll be new to mechs but have read and heard all about 'em for the last couple years. I wanted to pull the trigger last fall - but Super-T wasn't stocked w/ Simplicities or P+'s. I just wanted a Super-T for my 1st mech. Waiting on delivery of an 18500 Simplicity. Already looking forward to the re-appearance of the P+ in the spring. That will be mech #2 for me. Over 2 years using quality VV / VW devices looking forward to a change of pace.

 

[ARCHMAN]

Of course I realize that $120 is not a heafty price tag when talking about most of the in-house made mechanical battery tubes. It's definitely not a high price tag compared to a few of my other hobbies either. I can see that it is a well made product and I would not have bought one if I did not think it was worth the asking price. It is a piece of functional art and a cool gadget as well. As of this post I've only been vaping for 18 days not counting trying a few cig-a-likes but I'd say over this time I've been studying them for probably 20-30 hours. I was interested in these before I saw the price. I don't think I've seen a single negative review. When I saw the price and "in stock" I had to jump on it! That said, this maker is obviously talented AND smart because it seems clear that priority 1 is making an excellent product & priorities 2 & 3 are neck in neck being competitive pricing and growing availability. I salute him for his principals and I am sure I will dig the Super-T Precision Simplicity! I'm definitely enjoying this forum!

 

[Glenn54]

I ordered a 18500 on 1/27, one week down hopefully one to go. Now if someone could make a 20mm Kayfun Lite like atomizer I'd be set, maybe Dave!

 

[9ball_AJ]

I ordered a 18500 on 1/27, one week down hopefully one to go. Now if someone could make a 20mm Kayfun Lite like atomizer I'd be set, maybe Dave!

I've been asking for a 20mm Kayfun style atty for months... I haven't seen anything of quality yet, but the Strata looks awfully promising!

Super T ~ Strata RDA

 

[StrikeIII]

I've been debating on picking up a simplicity for a while now but the only thing that kept me from pulling the trigger was it's limited 20mm diameter. But every time I look at the pictures with the strata on it I finally decided to do it. That combo just looks too sick. I just hope the strata performs as good as it looks.

My question is when I placed the order for the strata I choose the ribbed finish. Is this the same finish that is on the simplicity? I want the finishes to match?

Sent from my Galaxy Note 3 using Tapatalk 4

 

[9ball_AJ]

I've been debating on picking up a simplicity for a while now but the only thing that kept me from pulling the trigger was it's limited 20mm diameter. But every time I look at the pictures with the strata on it I finally decided to do it. That combo just looks too sick. I just hope the strata performs as good as it looks.

My question is when I placed the order for the strata I choose the ribbed finish. Is this the same finish that is on the simplicity? I want the finishes to match?

Sent from my Galaxy Note 3 using Tapatalk 4

Yes the SS Simplicities have the the Ribbed finish. You chose wisely Danielson...

 

[snork]

I've been debating on picking up a simplicity for a while now but the only thing that kept me from pulling the trigger was it's limited 20mm diameter. But every time I look at the pictures with the strata on it I finally decided to do it. That combo just looks too sick. I just hope the strata performs as good as it looks.

My question is when I placed the order for the strata I choose the ribbed finish. Is this the same finish that is on the simplicity? I want the finishes to match?

Sent from my Galaxy Note 3 using Tapatalk 4

Yes, it matches perfectly.

 

[StrikeIII]

Yes the SS Simplicities have the the Ribbed finish. You chose wisely Danielson...

Yes, it matches perfectly.

Thanks, I actually just saw some pictures of it on the strata thread. The polished looks pretty nice with it too! Man why did I look. Haha


Sent from my Galaxy Note 3 using Tapatalk 4

 

[Cucco]

Of course I realize that $120 is not a heafty price tag when talking about most of the in-house made mechanical battery tubes. It's definitely not a high price tag compared to a few of my other hobbies either. I can see that it is a well made product and I would not have bought one if I did not think it was worth the asking price. It is a piece of functional art and a cool gadget as well. As of this post I've only been vaping for 18 days not counting trying a few cig-a-likes but I'd say over this time I've been studying them for probably 20-30 hours. I was interested in these before I saw the price. I don't think I've seen a single negative review. When I saw the price and "in stock" I had to jump on it! That said, this maker is obviously talented AND smart because it seems clear that priority 1 is making an excellent product & priorities 2 & 3 are neck in neck being competitive pricing and growing availability. I salute him for his principals and I am sure I will dig the Super-T Precision Simplicity! I'm definitely enjoying this forum!

Welcome to the family!