New Genesis type atomizer by DID!

[B-Rad_The_Mad_Vapr]

I have a DID from one of the first batches... not sure what the air hole size is... 1.2 - 1.5mm? I know it isn't a 1mm hole like my other genesis attys I have where I like it. all I know is it is way to airy draw for me and as a result I have only ran one tank though it . I haven't seen ones with smaller holes available, the site says standard 1.2mm I'd gladly trade mine for someones if they had one with a 1mm hole.

If not, is it possible for me to order a whole new did and get get it with a 1mm hole and ss nuts/post/screws?

please PM me if so. I know me being a supplier I technically am not supposed to post in here without Jim's permission so PM would be best I think. Thanks in advance for any help.

Brad

 

[rwechsler]

You can order a 1mm top cap on the site! No need for a whole new did, just swoop one of the replacement caps

I have a DID from one of the first batches... not sure what the air hole size is... 1.2 - 1.5mm? I know it isn't a 1mm hole like my other genesis attys I have where I like it. all I know is it is way to airy draw for me and as a result I have only ran one tank though it . I haven't seen ones with smaller holes available, the site says standard 1.2mm I'd gladly trade mine for someones if they had one with a 1mm hole.

If not, is it possible for me to order a whole new did and get get it with a 1mm hole and ss nuts/post/screws?

please PM me if so. I know me being a supplier I technically am not supposed to post in here without Jim's permission so PM would be best I think. Thanks in advance for any help.

Brad

 

[B-Rad_The_Mad_Vapr]

this is the only one I see... it says standard 1.2mm NORMAL Top cap for the DID and Short-DID (1.2mm airhole) if that's the standard what is on mine, I want 1mm like my hellfires.

 

[wasabi5858]

on the site it says 1.2mm

NORMAL Top cap for the DID and Short-DID (1.2mm airhole)

 

[Gomtuu]

I am nowhere near experienced as you, but by my 4th coil, I couldn't believe how difficult it wasn't. My first one was as bad as a blooper reel of coil making. It's like anything I guess, most of the things I know how to do (well) took time, practice and patience.

Off topic: Hence, your beautiful paintings.

 

[B-Rad_The_Mad_Vapr]

unless maybe the first ones made were larger like 1.5mm? not sure what mine is, but it look much larger than my hellfires and orion which have 1mm holes

 

[rwechsler]

Are you sure the hf is 1.0? I could have sworn the stock ah was 1.2mm, but then again, I did bore mine out to 1/16 pretty soon after getting it.

unless maybe the first ones made were larger like 1.5mm? not sure what mine is, but it look much larger than my hellfires and orion which have 1mm holes

 

[Gomtuu]

Even tho I don't have my mini DID yet...after seeing Pete's DID in person on Saturday...

Well, I have an itch for one.

I was afraid it would be too big for me, but the size is really just right.


I have to find a job !

Similar boat! I have to find a different/better/better paying job. How am I going to afford a SuperT mod and several more DIDs if I don't?

 

[B-Rad_The_Mad_Vapr]

well I know both of my hellfires are 1mm but that may have changed, I got mine before there was a list orion has 1mm and my new cobra that's comming is also.... 1/16 is huge... be like sucking on an ultralite cig That was one of the things I didn't like about my zenesis either. really think all should be 1mm very easy for someone that prefers the airy draw to bore it larger IMO

 

[Gomtuu]

I am a breast cancer survivor.

Yet another off topic post, but: Congratulations, overall! I know that can be some hard, deep business. I also know I'm not alone in this thread when I say that I'm happy you're here.

 

[Gomtuu]

Just updating everyone that my genesis atomizer tutorial pt 2 video didn't upload properly (thanks youtube), so i'll start it again tonight and hopefully it'll be ready by the time i wake up. Sorry for the delay everyone

You know, Rick, just you doing this for the community is pure awesome(ness). I'm pretty sure we can wait, especially since YouTube is deciding to be a robotic jerk at the moment.

 

[rwechsler]

Aww, thank you Gomtuu
It's my pleasure though! I'm just sorry it couldn't be up any sooner

You know, Rick, just you doing this for the community is pure awesome(ness). I'm pretty sure we can wait, especially since YouTube is deciding to be a robotic jerk at the moment.

 

[overall]

Why thank you so much

Yet another off topic post, but: Congratulations, overall! I know that can be some hard, deep business. I also know I'm not alone in this thread when I say that I'm happy you're here.

 

[Jim Damianidis]

I am really sorry about my site which is down. I 'm trying my best to fix the problem. Thank you very much for understanding.

 

[wasabi5858]

Hehe Jim, atleast it's down for a good reason, exceeding bandwidth limit. You are growing!

 

[overall]

Look like you have had too many visitors......looks like you are going to be really busy

I am really sorry about my site which is down. I 'm trying my best to fix the problem. Thank you very much for understanding.

 

[David Pavid]

Hah, sorry, been F5'ing that site for order-details ^^

 

[*ASH*]

Ash, that air bubble is normal. Air goes down the wick into the tank when you take a hit, similar to what you would see in a carto tank. I saw it happen with my DID when I got the clear tank on it.

Thanks mate so it's normal I think it's just a mtter of time then and day after day I will just make it better. lol

 

[Goz]

I am really sorry about my site which is down. I 'm trying my best to fix the problem. Thank you very much for understanding.

To many people checking out all the lovely shiny things on your website Jim

PS. Hope your back is feeling better, I know how painful back issues can be.

 

[ussr]

Can someone tell me how many parts i need in total to switch all brass to ss?