New Genesis type atomizer by DID!

[Jim Damianidis]

As I saw I have to do the lotery and open the Foto album
because I see all those fotos here!
Thank you
You know I love them!
DIDers.....(ha I like this)
Drip Tips/I had a finish problems with biger problem on satins
So I will run this asap!
I am learning from mistakes!
I will soon have the DID top caps with LOGO and SERIALS
and the 50% off will be given to the lucky first productions DIDers with no logo!
I give this because I wish all of you to have one!
I will do it for all the old ones!

Thank you

 

[Uma]

And here is my the DID on my ProV2 , and It's jus start to work better than before, and am still work on the preformance to work much better. am run it now on 3.8 V and the oHm is 2:00

View attachment 131559

Sweeet!!
Good to hear it's breaking in nicely for you too.

 

[David Pavid]

Hey Jim

when do you think the DID driptips will be up on site?
Would rather wait with my next order, so i can get matching driptips aswell

 

[Uma]

As I saw I have to do the lotery and open the Foto album
because I see all those fotos here!
Thank you
You know I love them!
DIDers.....(ha I like this)
Drip Tips/I had a finish problems with biger problem on satins
So I will run this asap!
I am learning from mistakes!
I will soon have the DID top caps with LOGO and SERIALS
and the 50% off will be given to the lucky first productions DIDers with no logo!
I give this because I wish all of you to have one!
I will do it for all the old ones!

Thank you

I'm looking forward to getting one (or two). I might drill one out to 1/16 just to see what all the fuss is about. Thanks Jim!!!

Being old has it's perks!

 

[Jimi D.]

I'm looking forward to getting one (or two). I might drill one out to 1/16 just to see what all the fuss is about. Thanks Jim!!!

Being old has it's perks!

I only have one cap. Also I will choke if I get more vapor. LOL

I love this tighter draw on the original air hole.

 

[Jimi D.]

Here's a great tip: If you have a great coil, but gets clogged with build-up. Why remove the wick, and go through all that work?Just drop some PGA on the wick and let it rip. Wipe off that black stuff with a napkin. Repeat. Voila! A nice clean set-up again.

 

[denali_41]

I will soon have the DID top caps with LOGO and SERIALS
and the 50% off will be given to the lucky first productions DIDers with no logo!
I give this because I wish all of you to have one!
I will do it for all the old ones!

Thank you

i have two from the first production runs,,can i request specific serial numbers ??

 

[Lazerrred]

i know the forum also,,they are against anything Greek ,,small narrow minded people that don't take to kindly to outsiders either !!

Ummm is this the one that is down now for maintenance ?

Rick mentions in his #1 video, that the bigger more powerful torches will harm the wick, make them crumble. I would invest in a smaller torch. Darn, time to go shopping again.

I use a plumbers propane torch. Turn it down real low & being careful it does the job pretty quick.

 

[*ASH*]

As I saw I have to do the lotery and open the Foto album
because I see all those fotos here!
Thank you
You know I love them!
DIDers.....(ha I like this)
Drip Tips/I had a finish problems with biger problem on satins
So I will run this asap!
I am learning from mistakes!
I will soon have the DID top caps with LOGO and SERIALS
and the 50% off will be given to the lucky first productions DIDers with no logo!
I give this because I wish all of you to have one!
I will do it for all the old ones!

Thank you

I will take one lool and would love my S/n here to be 1 or 6

Sweeet!!
Good to hear it's breaking in nicely for you too.

And yah see day after day am geting it better

 

[yankeebobo]

As I saw I have to do the lotery and open the Foto album
because I see all those fotos here!
Thank you
You know I love them!
DIDers.....(ha I like this)
Drip Tips/I had a finish problems with biger problem on satins
So I will run this asap!
I am learning from mistakes!
I will soon have the DID top caps with LOGO and SERIALS
and the 50% off will be given to the lucky first productions DIDers with no logo!
I give this because I wish all of you to have one!
I will do it for all the old ones!

Thank you

Damn. I guess I'll be shopping. AGAIN!
and that would be three.

 

[Uma]

Shoot. Just had to go browsing didn't I.
Adding one more to my wish list for my DID's to sit on.
side button telescopic mod:
Roller - Stage 1 - YouTube

 

[Jim Damianidis]

i have two from the first production runs,,can i request specific serial numbers ??

All numbers start from 0101 but the owners will be as the order number! Fair!
the numbers of 0001 to 0100 will be soon in a Metal Box. All three together with the same number and on the box to!
100pcs Polished and 100pcs Satin.
The DID the Mini DID and the Gemini.
Do not know about signature.Will see your oppinion first!
Thank you

 

[noflex]

All numbers start from 0101 but the owners will be as the order number! Fair!
the numbers of 0001 to 0100 will be soon in a Metal Box. All three together with the same number and on the box to!
100pcs Polished and 100pcs Satin.
The DID the Mini DID and the Gemini.
Do not know about signature.Will see your oppinion first!
Thank you

Wait whats going on with the DIDs? I have a polished from 2nd run

 

[yankeebobo]

All numbers start from 0101 but the owners will be as the order number! Fair!
the numbers of 0001 to 0100 will be soon in a Metal Box. All three together with the same number and on the box to!
100pcs Polished and 100pcs Satin.
The DID the Mini DID and the Gemini.
Do not know about signature.Will see your oppinion first!
Thank you

To clarify how this would work, if I ordered 3 DIDs in one order, how would they get numbered? And of course I wouldn't say no to a signature. And nice job with having 100 custom special editions. Man I'd love to get my hands on that.

 

[fuzzione]

I only have one cap. Also I will choke if I get more vapor. LOL

I love this tighter draw on the original air hole.

I'm with you on this Jimi. Still using the stock 1.2mm hole and filler screw; wouldn't know what to do with any additional vapour. In its present stock configuration the clouds I'm producing are already well beyond what it takes to satisfy me. You know, I appreciate all the enthusiast level DID configurations and 'quest for Cholo Clouds' but really, for me, this is completely unnecessary. I mean, when I smoked analogs I knew by taping 7 of them together and sticking them in my mouth I'd get a larger throat hit and intense smoke clouds but I didn't feel compelled to do that either

 

[fuzzione]

All numbers start from 0101 but the owners will be as the order number! Fair!
the numbers of 0001 to 0100 will be soon in a Metal Box. All three together with the same number and on the box to!
100pcs Polished and 100pcs Satin.
The DID the Mini DID and the Gemini.
Do not know about signature.Will see your oppinion first!
Thank you

Collectors Editions! Cool! Love the idea Jim, and for these I'd definitely suggest signatures, serials,....the full bling treatment.

 

[yankeebobo]

I'm with you on this Jimi. Still using the stock 1.2mm hole and filler screw; wouldn't know what to do with any additional vapour. In its present stock configuration the clouds I'm producing are already well beyond what it takes to satisfy me. You know, I appreciate all the enthusiast level DID configurations and 'quest for Cholo Clouds' but really, for me, this is completely unnecessary. I mean, when I smoked analogs I knew by taping 7 of them together and sticking them in my mouth I'd get a larger throat hit and intense smoke clouds but I didn't feel compelled to do that either

I actually ordered a cap with 1mm. VERY satisfied with TH, flavor and vapor.

 

[Jim Damianidis]

yankeebobo
This will run with order numbers
there I can see how many DID you got!

 

[EagleHawk]

I use all mechanical and 3.7 w/IMR batts. One DID is wrapped with 30G and 4/5 wraps - the other is 32 G and 3/2 wraps - sometimes 4/3 wraps - no problem. Dont worry about ohms- I never check my ohms - I go by # of wraps and what tastes best. I think - IMO - people make too much of an issue on what their ohms are reading. It's all about the flavor first, vapor second. Just wrap the wire, check for shorts - if ok, then vape it.

Right on Dspin, sounds good.. Definitely I am overthinking this stuff too much sometimes..

 

[dane1521]

All numbers start from 0101 but the owners will be as the order number! Fair!
the numbers of 0001 to 0100 will be soon in a Metal Box. All three together with the same number and on the box to!
100pcs Polished and 100pcs Satin.
The DID the Mini DID and the Gemini.
Do not know about signature.Will see your oppinion first!
Thank you

Sweet. Special edition box set. Don't have enough mods for all these DIDs but I'm definetly in for a satin box set. And I agree signatures would be nice ...full bling as said above.