New Genesis type atomizer by DID!

[Tonytiger1]

Ok so I've had the Gemini for a couple of days now.
Impressions.
With 30 gauge 4/3 wrap. Fill screw needs to be left out
Much less leaking through the fill hole. So far none.
Vapor warmer then standard did
Another thing I've notice is that the top cap doesn't get as hot as the standard
the material is thinner so it cools down faster between I think
Also more heat stays on the wick. smaller area to heat.

So so pleased perfect atty for my usage. I think I may need to drop my nic level again.


Tony

 

[Spanked]

Ok so I've had the Gemini for a couple of days now.
Impressions.
With 30 gauge 4/3 wrap. Fill screw needs to be left out
Much less leaking through the fill hole. So far none.
Vapor warmer then standard did
Another thing I've notice is that the top cap doesn't get as hot as the standard
the material is thinner so it cools down faster between I think
Also more heat stays on the wick. smaller area to heat.

So so pleased perfect atty for my usage. I think I may need to drop my nic level again.


Tony

The Gemini is the only one I don't have yet. Saw one in the classies for around $80 I almost bought

 

[studiovap]

Not quite, I wrapped the coil around the wick while I had a 14g syringe in the center channel before installing it all into the DID. I almost always wrap after installing my wick, but the 26g is just too thick to do that effectively. The resistance is in the ballpark of 0.5-0.6Ω, I haven't checked tbh, but it's pretty damn low

looks awesome mate, very similar to my 28g Nichrome resistance wise
Can I ask Rick, what # mesh and what dimensions (length of mesh) are you using, and is the juice burning at all on a fresh battery.?

 

[Tonytiger1]

The Gemini is the only one I don't have yet. Saw one in the classies for around $80 I almost bought

The mini is the same. My understanding. I just love the look and additional tank size of The Gemini.

Who in their right mind would do that. ,!
Tony

 

[rwechsler]

I don't measure my mesh before I roll my wicks, but the wick that I have going right now is around 5 layers of #500 mesh. Even with a fully charged MNKE IMR 18650, I get absolutely zero juice burning.

looks awesome mate, very similar to my 28g Nichrome resistance wise
Can I ask Rick, what # mesh and what dimensions (length of mesh) are you using, and is the juice burning at all on a fresh battery.?

 

[burnie71]

I have been sitting here thinking (rare for me) think that is.
All this stuff about wire and mesh, I have 30g and #500 on order now and a lot of it I'm beginning to wonder why! as I am getting a good vape with 32g and #400. Is this called keeping up with the Jones's? I guess once the stuff arrives and I get to play I may find out if its been worth the money time and effort

 

[Monoxxide]

You will be glad you did once you made your first coil with it . Got 28 and 30 awg here, 30 been my favorite mainly because i used my DID's on provari, it cant handle those real low ohm coils. That 26 awg is redicoulasly thick lol, look the gap between 1st and second nut haha. I gonna have to try some on the Poldiac. Nice to see Rick keep pushing the limits to.

 

[Striker911]

I have been sitting here thinking (rare for me) think that is.
All this stuff about wire and mesh, I have 30g and #500 on order now and a lot of it I'm beginning to wonder why! as I am getting a good vape with 32g and #400. Is this called keeping up with the Jones's? I guess once the stuff arrives and I get to play I may find out if its been worth the money time and effort

So sorry. Just noticed your over the pond . Not very cost effective lol.

 

[burnie71]

Yeah! it's just like how low can you go, 0.9 was mine on my Provari with 32g twisted on a thick rolled #400 wick was ok for a while then trouble I guess the resistance went to low. Hope your right Mono, yeah its a very big pond Striker a pain at times but good place to be.
Thanks guys

 

[MiriamWTH]

Drinking coffee and eagerly awaiting the UPS man now.
It says they can deliver between 9am and 7pm. I do hope it is closer to the 9am !!!
Specially after seeing Rick's photo's!
(strangely I do not seem to care about it being new years eve at all at the moment.... I just want the UPS man to come LOL)

 

[Sisq0]

(strangely I do not seem to care about it being new years eve at all at the moment.... I just want the UPS man to come LOL)

ROFL, you're killing me Miriam.

 

[dspin]

I have been sitting here thinking (rare for me) think that is.
All this stuff about wire and mesh, I have 30g and #500 on order now and a lot of it I'm beginning to wonder why! as I am getting a good vape with 32g and #400. Is this called keeping up with the Jones's? I guess once the stuff arrives and I get to play I may find out if its been worth the money time and effort

Your not the only one - I did the same. 500 and 30G - I went back to 32 G and 400 mesh - those I like the best of all.

 

[dspin]

So I guess a few of you found it before I even had a chance to check it out! But anyways, I hope everyone enjoys it, and if you have any questions, shoot me a PM or post em here and I'll get back to you asap!

Great tutorial RW, this will help all the new owners - and great pics I see you have posted - Kudos to you - my thoughts exactly on the Poldiac

 

[Monoxxide]

Miriam ran away, i got a suspicious feeling

 

[MiriamWTH]

Miriam ran away, i got a suspicious feeling

Miriam is sitting at the window instead of her PC! Still eagerly awaiting that UPS man!

(she also just finished preparing a big pan of soup that is now on the stove getting ready)

 

[Tonytiger1]

Drinking coffee and eagerly awaiting the UPS man now.
It says they can deliver between 9am and 7pm. I do hope it is closer to the 9am !!!
Specially after seeing Rick's photo's!
(strangely I do not seem to care about it being new years eve at all at the moment.... I just want the UPS man to come LOL)

I hope you get it early to. Knowing what I know now about it. Now Im glad I didn't know what i know now before I got it.

I think I'm the only one who will understand what I just wrote. Lol.


Tony

 

[MiriamWTH]

I hope you get it early to. Knowing what I know now about it. Now Im glad I didn't know what i know now before I got it.

I think I'm the only one who will understand what I just wrote. Lol.


Tony

LOL Tony. I totally get what you are saying ;-)
(and that bloody UPS man has yet to show his face!)

 

[Tonytiger1]

LOL Tony. I totally get what you are saying ;-)
(and that bloody UPS man has yet to show his face!)

Lol. It is wicked! I'm mean wicked!


Tony

 

[Tonytiger1]

LOL Tony. I totally get what you are saying ;-)
(and that bloody UPS man has yet to show his face!)

Im excited for you. It comes all together. Remember the contact adjustments are reverse threads. Take top cap off. Screw did on all the way turn adjustment screws about 1/3 out then screw top cap on. Put battery in. Vape Later you can adjust everything to make it look pretty. If you have time between vapes.
It would look something like this

Tony

 

[Monoxxide]

Spooky LOL


U ontvangt dit bericht op vraag van Dimitrios Damianidis, om u te melden dat de onderstaande elektronische verzendingsgegevens aan UPS werden doorgegeven.