New Genesis type atomizer by DID!
- Thread starter Jim Damianidis
- Start date
- th_trl_thread_readers 0
- Status
I was trying to hold off myself but broke down and bought an original D20 in the classies, I figure you can never have too many DIDs
. I have also sent my DID to Spectrum for fitting for some colored Pyrex (sorry Dspin, love the SS but also appreciate a nice glass tank). On a side note my training in MS ends Saturday and I get to go home! Thanks all for helping to make the time away home and family pass quickly.Link appears to be broken, here it is http://www.e-cigarette-forum.com/fo...ex-tanks-hybrids-genesis-style-atomizers.html
Last edited:
My Poldiac specially dressed for the party of one year MMV
View attachment 203360View attachment 203359
Congratulations Jim & MMVapors-team!!!
Have a great party
Any difference in the hit
Tony
You just had to post that didn't you. 
Difficult to say because I don't have a sub-1-ohm coil yet.
To me it hits the same, but may be if you would messure it there could be a difference.
But this is now completely brass, even the contacts.
So there is sure a difference in cleaning
Difficult to say because I don't have a sub-1-ohm coil yet.
To me it hits the same, but may be if you would messure it there could be a difference.
But this is now completely brass, even the contacts.
So there is sure a difference in cleaning
I have natgasman bringing me back brass contact set. I prefer not to clean once a week. Putting brass post in Gemini also Should make up for some loss.
Tony
FINALLY!!!!! Home At Last!!! Longest Week of my Life!!!
It's about time I got myself a Throne Worthy of the Gemini! I absolutely Love the Two Tone Look on this Baby!
Hope my DID Family is doing Excellent
Sincerely;
Nate
It's about time I got myself a Throne Worthy of the Gemini! I absolutely Love the Two Tone Look on this Baby!
Hope my DID Family is doing Excellent
Sincerely;
Nate
FINALLY!!!!! Home At Last!!! Longest Week of my Life!!!
It's about time I got myself a Throne Worthy of the Gemini! I absolutely Love the Two Tone Look on this Baby!
Hope my DID Family is doing Excellent
Sincerely;
Nate
I love the two together.
Tony
I don't know if you win with the brass post, because that will take more cleaning-care whilst it is in contact with the juice and tarnish faster.
I ordered the brass contacts for the Poldi as spares. But when I'm on the road, I don't want the sudden need for cleaning, so I changed the contacts to brass for my coming trip. And for now I notice no real difference in the force of hit.
May be because the batterie-tube is now also in brass???
Last edited:
I hear ya. I would wipe it clean when I re wrap. Went to ss when I broke it. I will try for a while. See if I run into problems. ilI update ya after I use it or a while.
Tony
On the subject of brass vs stainless as contact material in the DID I find no difference, as for external use brass for me personally is a definite No! my sweaty paws and brass don't mix. I like the quick wipe over of the stainless too much, also I just love the look of all stainless as it always looks new and bright and performs very well for the purpose I bought it for a good Vape !.
Please excuse my little rant, for today I celebrate 1 year smoke free.
Please excuse my little rant, for today I celebrate 1 year smoke free.
I love the two together.
Tony
Sweet Set Up
Looks very very much like mine I love it The thing hits harder than anything else I own for sure, and with a switch body and a top cap I can run another one with a different battery size because I have all the tubes, pants for them, an extra bottom cap and shirt 
Peeking in...hope everyone has been doing great !
Congratulations on the 1 year Burnie !
Congratulations on the 1 year Burnie !
Huge Congrats Burnie Great Achievement there my Friend
Good Morning Everyone I am debating taking apart the Poldiac Switch today to check out the internals and see if they need a good cleaning. I seriously don't think they do though because this thing is hitting REALLY hard
Hope everyone is having a great day
Sincerely;
Nate
Great Achievement there my Friend Good Morning Everyone
I am debating taking apart the Poldiac Switch today to check out the internals and see if they need a good cleaning. I seriously don't think they do though because this thing is hitting REALLY hard Hope everyone is having a great day
Sincerely;
Nate
Okay, so I decided this morning that since I got my Poldiac used that I was going to go ahead and take apart the switch to check it's contents and see if tey needed a cleaning. It was hitting beautifully right out of the box so it was definitely not out of a lack of performance. I did find that there was some crud in there so I took it all the way down to bare bones and Took an electric toothbrush with some toothpaste to each and every little bit bob and doo hicky
Now I know that I have heard a lot of fussing and what not about how "Complex" this switch is. Well lemme tell ya if I can do it, ANYONE Can. This thing was a breeze to strip down, clean and put back together. I hit the magnets dead on first time and got it back together within a minute or two. I can seriously say I have never owned a device tat hits this hard on a 1.6 ohm coil. I do not know if I can go much lower than that on this without choking myself.
Jim, you have done a Superb Job on the Poldiac, as I already suspected you would, and now all I need to do is save up to get another switch and top cap for one of the other tubes and the #0683 Bottom cap so I can have Two functioning Poldiacs.
Thank you so much for the quality and passion you put into all of your products my Friend, This Sailor Truly Appreciates it
Sincerely;
Nate
Now I know that I have heard a lot of fussing and what not about how "Complex" this switch is. Well lemme tell ya if I can do it, ANYONE Can. This thing was a breeze to strip down, clean and put back together. I hit the magnets dead on first time and got it back together within a minute or two. I can seriously say I have never owned a device tat hits this hard on a 1.6 ohm coil. I do not know if I can go much lower than that on this without choking myself.
Jim, you have done a Superb Job on the Poldiac, as I already suspected you would, and now all I need to do is save up to get another switch and top cap for one of the other tubes and the #0683 Bottom cap so I can have Two functioning Poldiacs.
Thank you so much for the quality and passion you put into all of your products my Friend, This Sailor Truly Appreciates it
Sincerely;
Nate
- Status
Similar threads
