New Genesis type atomizer by DID!

[umarbutt610]

And here it is!! I may do a bit of a review after a few days of use if anyone is on the fence...only word of caution is watch out for the fill tubes...I was caught by surprise when washing for the first time and they went down the drain.

View attachment 295211

It looks awesome.

 

[Nighthawk76]

I like the looks better in all brushed. Re coiled with dual at about .5 on mesh. So far flavor about an 8, vapor at 9. Only gripe so far is the afc ring's orings are too big and already broke one when reinstalling over the threads. Near impossible to turn on the topcap when warm. Swapped one out with a thinner and it's better. Can also access the deck without removing afc and juice access cap so a big win in my mind. Setup is a breeze on this beast.

 

[Portertown]

I am going to be ordering a Poldiac tomorrow and could use a little help from you fine Poldiac owners.
I see that MMV has all their different models of Poldiacs now up on their website in the V2 version, however when I click on them there is only a picture and the price but no description. The only one that was listed in a V2 version yesterday was the Aname and the description on it says it comes with the Peek Ketron and Rhodium over silver plated brass contacts.
Does all V2's come upgraded with the Peek Ketron and Rhodium over silver plated brass contacts?

Another question I have has to do with the 510 top cap. Will the 510 female threads hold up better made out of stainless steel or brass?

The Uma, Belial and Full Brass are what I have narrowed my choice down to. Your answers on the 510 thread material will help me decide which one of these three to order.

Thanks for any help you can offer.

 

[MiriamWTH]

I am going to be ordering a Poldiac tomorrow and could use a little help from you fine Poldiac owners.
I see that MMV has all their different models of Poldiacs now up on their website in the V2 version, however when I click on them there is only a picture and the price but no description. The only one that was listed in a V2 version yesterday was the Aname and the description on it says it comes with the Peek Ketron and Rhodium over silver plated brass contacts.
Does all V2's come upgraded with the Peek Ketron and Rhodium over silver plated brass contacts?

Another question I have has to do with the 510 top cap. Will the 510 female threads hold up better made out of stainless steel or brass?

The Uma, Belial and Full Brass are what I have narrowed my choice down to. Your answers on the 510 thread material will help me decide which one of these three to order.

Thanks for any help you can offer.

The descriptions should be up today. But yes all V2 come with Peek Ketron and Rhodium contacts.
For the other question, yes Brass is a softer material than SS but I have been using my own Aname with brass top cap for almost a year now and the threads are still fine

 

[Portertown]

The descriptions should be up today. But yes all V2 come with Peek Ketron and Rhodium contacts.
For the other question, yes Brass is a softer material than SS but I have been using my own Aname with brass top cap for almost a year now and the threads are still fine

Which of the ones with brass pants and shirt do you think looks the best? I think the Full Brass may be too much brass, but I have not seen one so it is hard for me to say for sure.

 

[MiriamWTH]

Which of the ones with brass pants and shirt do you think looks the best? I think the Full Brass may be too much brass, but I have not seen one so it is hard for me to say for sure.

Well Uma has Brass and Polished SS parts, and Belial has Brass and Satin SS parts... It all just depends on your level of "Magpie" LOL as in how shiny do you want it to be. I actually like the look of both of them.

 

[Portertown]

Well Uma has Brass and Polished SS parts, and Belial has Brass and Satin SS parts... It all just depends on your level of "Magpie" LOL as in how shiny do you want it to be. I actually like the look of both of them.

I think my choice is going to be an Uma in the 18650 size. I just saw a very high resolution photo of a Uma in the photo thread and it really looks good to me. It sure looks to be highly polished and very shiny. It will probably make me have to polish all my Kayfun Lites to match it.

As I am in the US, I am going to sleep on it tonight and make my final decision in the morning and place my order.

Thanks so much for you help and I can't wait to be the owner of a Poldiac.

 

[MiriamWTH]

 

[MiriamWTH]

 

[fozzinop]

I noticed there isn't a data sheet for TNS yet. What is the height of the regular and short TNS respectively?

 

[Absinte]

hey guys, my brass nut are all blackened, any way to shine them back again?

 

[Nach]

hey guys, my brass nut are all blackened, any way to shine them back again?

Brasso!!!!

 

[Jim Damianidis]

I have been informed from moderators that I have to close this thread because is to big and with other big threads slowing down the forum!
So tomorrow Monday we will close this thread and make I guess 2 threads,one for Poldiac and one for the TNS.

 

[evilfrog]

It's a tribute to your longevity and popularity that your thread is too big for ECF!

 

[Uma]

Is there a "I DID 2. Thread yet?

 

[MiriamWTH]

The new thread will be up soon Uma.
and how are ya sis?

 

[Uma]

Good deal.
Been busy making a pest of myself in the fight against bans & ignorance. How have you been?

 

[Oly6t1]

I have been informed from moderators that I have to close this thread.....

Closed but still able to view yet? Or will it be deleted as well?

 

[burnie71]

Closed but still able to view yet? Or will it be deleted as well?

I sincerely hope it does not get deleted there is too much good information on here, plus its a record of all the friendships that have been made here.

Many thanks Jim for creating this wonderful thread....burnie

 

[Oly6t1]

Quick! Print all page's to PDF file