New Genesis type atomizer by DID!

[Mr.Mann]

Just Sharing Guys. One of my fellow vapers back in the Philippines using the DID. Insane vapor production

Good goodness! And some of his drags were short pulls... VAPOR production is off the charts!

 

[fuzzione]

Good goodness! And some of his drags were short pulls... VAPOR production is off the charts!

Sure, but what the vid doesn't explain is the dude went through a full tank of juice in the 1:47min clip

 

[Uma]

oh
I have a surprice to everyone that buys the MiniDID
Mini DID has the same price with the regular DID but...
has many of those things (I tried for all of them) that has been mentioned from all of you in this thread!
I want to THANK YOU one more time!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
I will have a foto of an open top cap ASAP (I am waiting some upgrades)
I like surprices and the feeling is much biger when YOU do them!!!!!

This sounds like lots of fun!!

 

[kabonk]

I went with 2 shorties can't wait to see some pics of the mini I might have to get one of those too

 

[Uma]

if you want to increase the th you have to have a smaller air hole, so it is difficult to increase it in the DID. but I do different thing to increase the th. if you have a spare small o ring that comes with the DID kit, try to put the o ring in the filling screw and close it tightly, then you will get better th and better wick.
many people said that if you open the filling screw it is better for vapor production and wick, which is not true. the reason is if you vape with opened filling screw there will be no pressure in the tank and the air in the tank will come through 2 holes (filling hole and wick holes) but if you screw the filling hole tightly with o ring and vape it, there will be lot pressure in the wick hole that make the mesh really wet and you will never have a dry vape and decrease the hot spots, and as you know more juice in the mesh means more vapor. in addition because the air will become just from the wick hole that is very close to air hole, you will get better th.

if you really get what I said try it and tell us your experience
and excuse my language I'm not that good in english

Wow! Great tip!! (and no wonder why I never get a dry hit!)

and to think I actually had the o-ring on that screw accidentally once.

 

[mwa102464]

No light tricking my eyes hear man, mine are putting out as much as the one in the video, I have a single wick in one did and a dual wick in the 2nd DID, my ohm is 1.2ohm with the 2 wrap, flavor is crazy good and vapor is explosive I dont use the filler screw ever,,, my TH is amazing, if you want more TH back off your top cap a bit but I see no reason to have to do this, with a 2 wire wrap there is plenty of TH, FLAVOR, AND VAPOR. I see no reason to use the fill hole screw and if I do it floods to much, mine wick perfectly fine without. But backing up your top cap so its not directly lined up with the wick will give you more TH if you really need it, but with a 2 wire wrap and the top cap lined up perfect like it is when fully closed you will see the performance is in like High Gear about 3.2v-3.7v I run it on my Ego 18650 Mod, on either regulated mode or non regulated mode, which is 3.3v or full Batt power, and my 2nd DID is always on my Darwin which is the ultimate in my opinion, dialing it to Max performance always

 

[Uma]

Sure, but what the vid doesn't explain is the dude went through a full tank of juice in the 1:47min clip

LOL, that must explain why there is part1 and part2...

Stupendous amounts of vapor!! I can watch part 2 repeatedly like I do part 1~!
Love how he never gets a dry hit either. Proof is in the pudding!

 

[mwa102464]

So, that's the whole point of Max performance, any great Atty set up goes through juice when running in Max performance mode, it also taste the very best and produces max vapor, every great set up I ever had goes through juice.

 

[muddstar]

Got the Cholo covered, just finished short did, clear tank, gangsta wick made with 250 ss mesh, and 2 wraps of 28k. Tons of everything good. If ya step I'll throw my chrome up.

 

[fuzzione]

LOL, that must explain why there is part1 and part2...

Stupendous amounts of vapor!! I can watch part 2 repeatedly like I do part 1~!
Love how he never gets a dry hit either. Proof is in the pudding!

Agreed! If ever there was a video where words were redundant this would have to be it.
And here I thought I've already achieved a fantastic amount of vapour production (I actually
set off the smoke detector vaping in the bedroom) but this is just insane. At this level
I'd have to take the batteries out of every one in the house.

 

[mwa102464]

Got the Cholo covered, just finished short did, clear tank, gangsta wick made with 250 ss mesh, and 2 wraps of 28k. Tons of everything good. If ya step I'll throw my chrome up.

You should try a piece of 200

 

[muddstar]

I will now, exit to mesh shopping.

You should try a piece of 200

 

[Jimi D.]

mwa, what's your pg vg ratio?

 

[mwa102464]

Jimi,

Right now I am running Boba's bounty in one DID, and Gorilla juice in the other, rare I usually make my own juice but re-did my 2 DID's this evening putting on the clear tanks, and I put the Boba's in one and the Gorilla in the other because I had 2 100ml bottles of it in the fridge I forgot about, either way though I always use a high VG Liquid, however it doesnt matter with these DID's Jimi even a 80/20 PG/VG will put out massive vapor production if there set up correctly. Another thing I also noticed with these clear tanks is making sure your wick is not touching the bottom is a huge deal, even if you have it cut on a 45% angle it still must be off the bottom to get max wicking performance.

 

[VAPNJ350]

Honestly Jim, your whole approach to all of us is the gift! (Not saying I wouldn't accept a personal gift from you! ) This thread is made up of so many good posts and probably 99% of the posters are really decent individuals. I think it all starts at the top and we are just playing our parts in accordance with how awesome you are. While I have only been on this thread for a few weeks, after reading the whole thing, I feel like I have gotten to know so many of you. I look forward to receiving the DID I purchased and using The Index myself. Jim, this is your thread and I love being welcome here.

Now back to our regularly scheduled DID talk.

Im literally giving you a "STANDING "O"" Mr. Mann. All this time and work this individual put in to make this index and he DOESN'T EVEN HAVE A DID YET. Are you kidding me ??? I think we could all really learn something from this kind of selfLESSness. I honestly applaud you sir. If even HALF the world could think and act in this way...if even.

You've done Jim and this thread an above and beyond type service to say the very least.

 

[Mr.Mann]

Jimi,

Right now I am running Boba's bounty in one DID, and Gorilla juice in the other, rare I usually make my own juice but re-did my 2 DID's this evening putting on the clear tanks, and I put the Boba's in one and the Gorilla in the other because I had 2 100ml bottles of it in the fridge I forgot about, either way though I always use a high VG Liquid, however it doesnt matter with these DID's Jimi even a 80/20 PG/VG will put out massive vapor production if there set up correctly. Another thing I also noticed with these clear tanks is making sure your wick is not touching the bottom is a huge deal, even if you have it cut on a 45% angle it still must be off the bottom to get max wicking performance.

So you are using 200 mesh? Where did you get yours? I feel silly asking after logging in all those posts, but I would still like to know. I look forward to trying your 2 wick method. I will also log in your posts from tonight in one of the categories though I don't know which one.

Im literally giving you a "STANDING "O"" Mr. Mann. All this time and work this individual put in to make this index and he DOESN'T EVEN HAVE A DID YET. Are you kidding me ??? I think we could all really learn something from this kind of selfLESSness. I honestly applaud you sir. If even HALF the world could think and act in this way...if even.

You've done Jim and this thread an above and beyond type service to say the very least.

Thanks. You all were so kind to me from the second I began posting that I wanted to give back! Plus, the DID looks like a great piece of equipment for me to work with and I didn't want to have to ask people to repeat themselves all the time.

 

[fuzzione]

Here's where I got mesh from Mr. Mann

The Mesh Company (Warrington) Ltd #325 & #200 Super Fine Filtration Mesh

They always give you a free extra sheet!

Took about 10 days for delivery.

 

[Mr.Mann]

Here's where I got mesh from Mr. Mann

The Mesh Company (Warrington) Ltd #325 & #200 Super Fine Filtration Mesh

They always give you a free extra sheet!

Took about 10 days for delivery.

I thought that was THE place. While I had logged in this and several others, I still wanted to know where someone had actually bought from as opposed to doing a google search for it. So thanks for giving me your info first hand.

How does the 200 differ in terms of performance with the 325? Are there any downsides, or is it all pluses?

 

[wasabi5858]

I think the 200 mean 200 wires/inch or something, so its larger spacing good for thicker juice?

 

[wasabi5858]

Just ordered 2 miniDID in both satin and polished finish. Can't wait!