Hey thx for that. I never knew there was a power limiter, always thought the switch amperage was the controlling factor. Then again, I never vape much more than ~9 watts so never would've found out first hand.
New Genesis type atomizer by DID!
- Thread starter Jim Damianidis
- Start date
- th_trl_thread_readers 0
- Status
Hey thx for that. I never knew there was a power limiter, always thought the switch amperage was the controlling factor. Then again, I never vape much more than ~9 watts so never would've found out first hand.
LOL, I really like the vaping gear but Loooove "the Ollie". He's always by my side and never judgmental, just cool.
I have a kick in my GGTS....and yes, I'm lovin it.
I admit, depending on the coil, or the juice, I don't always USE the kick. I may remove it from time to time and just toss an 18650 in. But it's there, and dedicated for use in it.
Woo-Hoo
Vapemail brought a package from Greece!!! Finally got my mini-did, and its a beauty, new guts for my trusty DID, ya I went the stainless route, now I have brass extras in case my fat hands break the positive pole. Going to oxidize a nice piece of 500 mesh later and put it to the test. Still waiting on my mech mod that will house my mini, but will fire it up on my lavatube for now. Eyeball of mini DID looks like its up to Big Jim's standards, as I expect no less, fun in the house tonight!! BTW, that other thread is turning useless, can't change minds and hearts that don't want to be changed, Oh well, so be it. All I can do is try and do the right thing myself, all else falls into place, later gang!
Vapemail brought a package from Greece!!! Finally got my mini-did, and its a beauty, new guts for my trusty DID, ya I went the stainless route, now I have brass extras in case my fat hands break the positive pole. Going to oxidize a nice piece of 500 mesh later and put it to the test. Still waiting on my mech mod that will house my mini, but will fire it up on my lavatube for now. Eyeball of mini DID looks like its up to Big Jim's standards, as I expect no less
, fun in the house tonight!! BTW, that other thread is turning useless, can't change minds and hearts that don't want to be changed, Oh well, so be it. All I can do is try and do the right thing myself, all else falls into place, later gang!
I went through my spat for the first week or so of owning a DID so bad, and then got used to it, it's quirks, it's setup, etc. Then I brought in SS innards. Actually went through another "struggle" phase. All those quirks I picked up on the thread and through my own experience as far as coiling low, nut stacks, etc no longer applied with the SS spacer, lower wrap, etc. But - I'm sure it was just me - or a bad day. All well now.
Woo-Hoo
Vapemail brought a package from Greece!!! Finally got my mini-did, and its a beauty, new guts for my trusty DID, ya I went the stainless route, now I have brass extras in case my fat hands break the positive pole. Going to oxidize a nice piece of 500 mesh later and put it to the test. Still waiting on my mech mod that will house my mini, but will fire it up on my lavatube for now. Eyeball of mini DID looks like its up to Big Jim's standards, as I expect no less
Got shipment notice on the 18th and a notice I missed the mailman today. Time to call TNT tomorrow and get my DID. I can't wait to struggle to get this thing going and be in love with this thing. Wish me luck I am not sure how well my German is going to be tomorrow but I will try.
Sent from my HTC Desire HD using Tapatalk 2
Sent from my HTC Desire HD using Tapatalk 2
Most TNT-people in Germany speak some English.
Or at least sort-of-Swedish-cook-English, like me
You'll be fine...it's already very close...you can't miss it!
Woo-Hoo
Vapemail brought a package from Greece!!! Finally got my mini-did, and its a beauty, new guts for my trusty DID, ya I went the stainless route, now I have brass extras in case my fat hands break the positive pole. Going to oxidize a nice piece of 500 mesh later and put it to the test. Still waiting on my mech mod that will house my mini, but will fire it up on my lavatube for now. Eyeball of mini DID looks like its up to Big Jim's standards, as I expect no less
lace, later gang!
Congrats ricky, glad you got it
OK Mini-Did setup with 33 awg twisted coil, a 4 wrap, on a 500 mesh wick, rolled almost solid and fitting the hole with minor resistance. Ohm at 1.9. I can report we have a freight train arriving in terminal 2!! Big vapor, great flavor (80/20 pg/vg 15 mg nic, higher pg than normal, higher nic then normal, so I have something setup different than my other DID 100% vg, 6 nic) I used an eyeglass screw driver to tighten, because my fat fingers were a bit much for the small scale, it worked great. The machining itself seems perfect with buttery threads. Wick and air hole a perfect match. I gave it a pre-wash in alcohol and removed any machine oils etc. Set-up was easy. Again thicker coil seems to eliminate many of my early fumbling and gets to work real quick. Well done, all is well, just going to enjoy the vape. Anyone on the fence on this one should be comfortable to jump in. Thanks Jim, great Atty.
Don't worry, it will be there before you know it, welcome aboard the DID train, you WILL love it!!
I love the enthusiasm you're showing is this post!
But suddenly I realised, only just a few weeks ago I would not have had a clue what you were talking about
Put this post in the new-member-section and assure people:
'don't worry, study hard and in a few weeks time this text will make complete sense!
Enjoy your new vape!
Last edited:
Congrats Ricky!! It's great to hear you mastered it and that it's vaping like a freight train!
and 500/33 twisted on that little tiny thing?? Kudos!!! It used up all my dexterity just wrapping the norm. But dang, what a nice wrap, if I do say so myself. ::: pats both of us on the back :::
and 500/33 twisted on that little tiny thing?? Kudos!!! It used up all my dexterity just wrapping the norm. But dang, what a nice wrap, if I do say so myself. ::: pats both of us on the back :::
@Brigit, and Uma
Thanks, I so enjoy sharing my success and finding help for my failures. Not a better thread, people, or atty maker, on ECF.
Sent from my cm_tenderloin using Tapatalk 2
Thanks, I so enjoy sharing my success and finding help for my failures. Not a better thread, people, or atty maker, on ECF.
Sent from my cm_tenderloin using Tapatalk 2
How can the mailman not ring the doorbell???!?!?! The fiend left me a note saying I wasn't here. Well, one more day with only one DID won't hurt (too much).
At least I've gotten my 500 mesh. Breaking in a 30 AWG coil now.... so far so good.
At least I've gotten my 500 mesh. Breaking in a 30 AWG coil now.... so far so good.
I just have to ask Dspin, do you vape wearing some white gloves, because I would hate to put a greasy paw print on that thing.
Looks like my DID is getting on a big ole jet airliner, and leaving Greece!
Looks like my DID is getting on a big ole jet airliner, and leaving Greece!
After 3 weeks of utter bliss, and at least 10 perfect coils, I am having a DID day from hell! It's so strange how all of sudden I can't do anything right. I got so frustrated that I set it up using silica wick!!!!! Works pretty well by the way.
Well, tomorrow is another DID DAY.
Well, tomorrow is another DID DAY.
Since 9-11-01, and after watching Celebrity Apprentice, I have really wanted to visit New York, NY. Now I am over it. Because My Heart has been in New York for the last Seven Days as I look and have seen the following (over and over):
Processed Through Sort Facility September 12, 2012, 10:21 pm ISC NEW YORK NY(USPS) Registered Mail
Today is now the 19th, Time to go home, Vacation's OVER! Customs do you hear me, Vacations OVER.
Processed Through Sort Facility September 12, 2012, 10:21 pm ISC NEW YORK NY(USPS) Registered Mail
Today is now the 19th, Time to go home, Vacation's OVER! Customs do you hear me, Vacations OVER.
Bummer Pete, John Lennon said it best
Nobody told me there'd be days like these
Strange days indeed -- most peculiar, mama
I've had stubborn setups. Now, if it doesn't work right in a reasonable amount of time (or I feel like it's acting up on purpose just to see me scowl) I pull it, reburn it and recoil it. If that fails I chuck the wick and coil and start over. Hang in there...Strange days indeed -- most peculiar, mama
- Status
Similar threads
